Operator, Equipment Resume Samples
4.8
(118 votes) for
Operator, Equipment Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the operator, equipment job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
LK
L Kunde
Liliane
Kunde
55840 Littel Unions
Philadelphia
PA
+1 (555) 769 4023
55840 Littel Unions
Philadelphia
PA
Phone
p
+1 (555) 769 4023
Experience
Experience
Los Angeles, CA
Equipment Operator Dirt
Los Angeles, CA
Mante and Sons
Los Angeles, CA
Equipment Operator Dirt
- May assist in lifting, positioning and securing materials and work pieces during installation
- Responsible for observing and complying with all safety and project rules
- Responsible for the safe and accurate loading and unloading of heavy equipment to and from project locations in an effective and efficient manner
- Drives truck to destination, applying knowledge of commercial driving regulations and area roads
- Cleans and maintains crane and hoisting mechanism
- Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment
- Adjust machine settings to complete tasks according to specification, accurately and in a timely manner
Philadelphia, PA
Small Equipment Operator
Philadelphia, PA
Mitchell-Kling
Philadelphia, PA
Small Equipment Operator
- Perform other duties as assigned
- Perform routine maintenance and daily inspection on equipment such as lubricating, fueling, and cleaning
- Compiles worksheets or tickets from customer specifications
- Verifies that equipment is in working order, e.g., tooling, safety mechanisms
- Insure safety around working areas
- Keep surrounding work areas clean
- Performs daily maintenance and cleaning activities
present
New York, NY
Equipment Operator Light
New York, NY
Mraz-O'Hara
present
New York, NY
Equipment Operator Light
present
- May assist in lifting, position and securing or materials and work pieces during installation
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery
- Relies on instructions and pre-established guidelines to perform the functions of the job
- Use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, lathes, hammers, welding equipment, and jacks and hoists
- Safely move and position inventory, supplies, and equipment and determine when load is properly balanced, tied down, and flagged in accordance with company policy, state, and federal regulations
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, and pressure gauges
- Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision
Education
Education
Bachelor’s Degree in Manual Skill
Bachelor’s Degree in Manual Skill
University of Florida
Bachelor’s Degree in Manual Skill
Skills
Skills
- Reliability and Dependability as an Engineering Equipment Operator
- RELIABILITY AND DEPENDABILITY AS AN ENGINEERING EQUIPMENT OPERATOR
- Ability To Operate Safely (Non-Motor Vehicle)
- Ability to Interpret Instructions and Specifications (related to mobile equipment operation)
- ABILITY TO INTERPRET INSTRUCTIONS & SPECIFICATIONS RELATED TO MOBILE EQUIPMENT OPERATION
- ABILITY TO DO THE WORK OF an eNGINEER EQUIPMENT OPERATOR WITHOUT MORE THAN NORMAL SUPERVISION
- Ability to Drive Safely (Motor Vehicles)
- Occasional Travel
- Work Practices (includes keeping things neat, clean, and in order)
- Operation of Motor Vehicles
15 Operator, Equipment resume templates
Read our complete resume writing guides
1
Equipment Operator Iii Street Sweeper Resume Examples & Samples
- Completion of approved training course in operating a Street Sweeper
- Certification by an appointing authority that applicant has been adequately trained to operate a Street Sweeper
- NOTE: A valid Class B (or higher) Commercial Driver's License (CDL) from a state other than Louisiana is acceptable for application; however, once an employment offer is extended, an applicant has ten (10) days to obtain the required Louisiana CDL. Failure to obtain a Louisiana license will disqualify an applicant for permanent employment in this position
- 5 years or more
2
Equipment Operator Iii Large Mowers Resume Examples & Samples
- Completion of approved training course in operating Large Mowers (such as Multi-Reel Gang, Slope Mower, Triple Flail, or similar)
- Current Civil Service employees with Jefferson Parish MUST receive signed verification from an appointing authority of satisfactory, on-the-job training to operate Large Mowers (such as Multi-Reel Gang, Slope Mower, Triple Flail, or similar)
- 1 year to less than 2 years
- 4 years to less than 5 years
3
Printing Services Equipment Operator Resume Examples & Samples
- 1 to 2 Years Experience in Offset Printing Machine Operation
- 2 Years Experience Computer Use - Microsoft Office, Windows
- Ability to set up an operate machinery in the Bindery Section
- Pre-Press and Digital Printing Operation Experience
- Eagerness to contribute in a team-oriented environment
- Good communication (written and oral) and interpersonal skills
4
Equipment Operator Light Resume Examples & Samples
- Use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, lathes, hammers, welding equipment, and jacks and hoists
- Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery
- Welds broken parts and structural members
- Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, and pressure gauges
- Inspect, repair, and maintain automotive and mechanical equipment and machinery such as pumps and compressors
- Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision
- Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager
5
Seasonal Material Handling Equipment Operator Resume Examples & Samples
- Safely loads, unloads, moves and stacks product using a forklift or other material handling equipment
- Properly utilizes a warehouse management system and maintains appropriate work documents
- Properly stages material within designated areas
- Maintains the cleanliness and order of work areas
- The ability to get along with others and consistently promote a positive team environment
- Assist other employees in the performance of their assigned duties when necessary
- Follows all safety procedures on a consistent basis
- Label Cartons: Correctly label each carton or pallet with correct identification label
- Verify Product: Operate VT/LRT terminals to assist in identification and receipt acknowledgment using keyboard/scanner
- Responsible for Properly Stacking and Cubing Pallet (Manual Distribution Center only): Lift cartons off tray/chute, and stack cartons on pallet up to a height of 7 ½ feet. Pallet must be properly squared
- Identify Splits: Identify an incoming merchandise pallet so that the radio frequency system or receiver can indicate the proper split
- Split Full Pallets: Pick the quantity of items described on the terminal or receiver to the correct store pallet by moving the pallet with hand jack or power equipment across the staging rollers and placing the carton on the designated store pallet
- Top Load Merchandise: Hand stack merchandise on top of pallets to fill available space on trailer, up to 7 ½ feet high to ensure fully cubed trailer
- Record Shipping Documentation: Record seal, trailer, door, and store number onto shipping log
- Safe Procedures: Maintain safe work practices as outlined in the Standard Operating Procedures
- Ability to read and understand the English language in order to interpret carton vendor markings to properly breakdown merchandise
- Basic math skills including addition, subtraction, and multiplication, necessary for counting cartons and calculating specifications (pallet count)
- Ability to grasp, bend walk, lift and move cartons up to 75 pounds
- Sufficient manual dexterity to be able to shrink wrap/tape a pallet from top to bottom by holding a cylinder of shrink wrap/tape and walking around a pallet up to a 6 foot height
- Understanding of MHE dynamics (center of gravity, load centers, lift heights, name plates, and factors that affect stability)
6
Material Handling Equipment Operator Resume Examples & Samples
- Move Merchandise: Operate hand jacks and/or Material Handling Equipment experience in operating MHE such as hand jacks, forklifts, reach’s, order pickers and turrets to remove merchandise to the next designated department
- Safely picks, wraps, counts, weighs, inventories or tags products and materials
- Safely loads outbound freight; receives inbound loads
- Correctly inspects material handling equipment and performs basic maintenance to ensure safe operations
- Properly inspects trailers prior to loading or unloading freight
- Regular and consistent attendance and punctuality are job requirements
- Build Pallet: When receiving, arrange and place cartons onto pallets to correct Ti x Hi specifications (pallet count). When picking, stack cartons on pallet up to a height of 6 ½ feet
- Shrink Wrap/Tape all Completed Pallets: Secure pallets with shrink wrap/tape to keep cartons from falling while merchandise is being transported
- Seal Totes: Place tamper-proof tags on totes with security merchandise
- Clean: Maintain a clean and safe work area
- Loss Prevention: Responsible for taking steps to detect common signs of theft and other security issues involving co-workers and to promptly communicate potential problems to Distribution Center management
- Ability to safely operate all Material Handling Equipment (certification required) including, but not limited to, the following
- A. Pallet End rider/walkie/EPJ b. Stand-up Forklift / Reach / Order Picker c: Sit-down Forklift (clamp)
- Ability to work in job functions in heights up to 35 feet/ 5 stories high
7
Equipment Operator Journey Resume Examples & Samples
- Moves hand levers, adjusts hand wheels and depresses pedals to operate machines and control attachments such as blades, buckets and scrapers
- May be required to maintain CDL
- Must be 18 years of age or older with the ability to lift up to 60 pounds, ability to pass pre- employment physical and drug screen
8
Equipment Operator Light Resume Examples & Samples
- May be responsible for routine maintenance or repairs
- May require a high school diploma or its equivalent and previous years of related experience
- Has knowledge of commonly-used concepts, practices, and procedures within a particular field
- Typically reports to a supervisor
- Certified 8-ton
- CDL
9
Coal Equipment Operator Resume Examples & Samples
- Inspect, monitor, and operate pumps, manual valves, and motors found in power generation fuel and water systems
- Receive and unload fuel
- Collect and prepare fuel samples
- Prepare and complete documentation for the aforementioned activities and procedures
- Performing equipment isolation and alignments (electrical and mechanical)
- Switch trains and/or work around heavy equipment (e.g., bulldozers, tractors, back hoes, etc), trains and/or ships (Savannah)
- Perform housekeeping activities to ensure the cleanliness of the equipment and fuels area and to ensure that dust control procedures are being addressed. This will include performing fire watch and responding to incipient fires
- Assist, other personnel such as mechanical and electrical maintenance, laboratory, and engineering personnel
- Brief the relief shift personnel on the status of the work and any information pertinent to the safe and efficient operation of the equipment
- Pass an onsite training program and qualification exam to retain employment
- Follow safety rules, regulations and procedures
- Qualify on a written pre-employment aptitude test and physical abilities test before being considered for an on-site interview. Testing will be coordinated by the recruiter for this position. No action regarding test scheduling is necessary on the interested applicant's part. Simply apply for the position to begin the candidate screening process. To view aptitude test information click on the "Employment Testing" link found from the Hiring Process link on the Southern Company Career website
- Be able to medically qualify for the use of a respirator
- Technical Degree, Certificate or Diploma preferred
- Previous work experience (full-time or part-time) preferred but not required
- Previous work experience in power plant, manufacturing, industrial, commercial, warehousing, construction, experience with moving conveyors/belts/systems, or other safety related setting preferred but not required
- Knowledge of basic electrical and mechanical principles
- Knowledge of hand tools
- Ability to read, understand and follow technical procedures, rules and regulations
- Ability to read and interpret tables, graphs, and piping diagrams
- Ability to work with and support team oriented work groups
- Ability to perform physical activities while wearing respirators with filter cartridges or self contained breathing apparatuses in a power plant environment
- Open two-way communication skills
10
Wire Line Equipment Operator Resume Examples & Samples
- Under minimal supervision run multiple applications of medium to high risk in the Wireline Services group
- Continues to expand and apply application knowledge and expertise to include applications of increasing complexity and/or risk in Cased Hole completions and/or other product groups
- Ensures supplied equipment is compatible with all other equipment used for job
- Provides front-line support with customer and accurately completes all paperwork prior to or upon completion of job
- Uses experience and knowledge of applications to ensure products and services are of highest quality
- May conduct on-the-job training for some Case Hole Completions or other applications as required
- Must be willing to work on-call 24 hours a day
- Must have a clean driving record and be able to obtain a CDL
- Experience working outdoors in all types of weather conditions
- 2+ years of rig experience or wireline experience
- CDL A or B with Hazmat
- Coil tubing experience
11
Small Equipment Operator Senior Resume Examples & Samples
- Must be cross-trained and multi-functional on several equipment types including baler, loader, bobcat, candensifier, forklift, etc
- Experience: 1 year of relevant experience
- While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and fumes or airborne particles
- The employee is frequently exposed to outside weather conditions and vibration. The noise level in the work environment is usually loud
- While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear
- The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl
- The employee must frequently lift and/or move up to __ pounds and occasionally lift and/or move up to __ pounds
12
LF Equipment Operator Resume Examples & Samples
- At least six months previous related work experience preferred
- Ability to read, understand, and count numbers required
- Ability to work in varying temperatures
- Ability to judge distances
- Operate computer - hand held and/or desktop
13
Experienced Equipment Operator Resume Examples & Samples
- Consistently provide a professional experience when handling an internal or external guest requests
- Overall cleanliness, appearance, flow of all base areas, including ski rack placement
- Minimum 1 year experience operating heavy equipment- required
- Read, Write, speak English - required
- Must have commitment to safety
- Must have ability to work outside in extreme mountain conditions
- Must have a flexible schedule which would include the ability to work early mornings, evenings, nights, weekends and holidays
- Ability to work outside in extreme mountain conditions – required
14
Equipment Operator Heavy Dirt Resume Examples & Samples
- May perform minor repairs
- Will be required to pass certification testing prior to operating some equipment
- Responsible for observing and complying with all company safety and project policies
- Relies on instructions and pre-established guidelines to perform the functions of the job
- Primary job functions do not typically require exercising independent
- May be required to pass company or client background check
- Must have the ability to read, write and understand math and English
- Must have up to 3 years’ experience operating one or more of the following equipment: skid steer, rubber tire loader, backhoe, roller/compactor, dump truck, water truck or off-road trucks
15
Trinity Highway Equipment Operator Resume Examples & Samples
- Set up and operates production machines to cut, bend, straighten, or form parts as specified by blueprints
- Lay-up sequence and/or templates
- Read blueprints, adjusts for thickness and shape of materials and make appropriate settings
- Load material for processing, verifies dimensional requirements
- Unload and may transfer materials to storage areas
- May use overhead cranes or forklift
- Understands & learns to read simple blueprints
16
Receiving High Bay Equipment Operator Resume Examples & Samples
- Ability to key accurately and productively using PC’s, hand-held computers or other such devices
- Follow all Standard Operating Procedures and safety/security guidance
- Operate powered equipment as assigned by Manager or Supervisor
- Adhere to conveyor lock-out procedures
- Work on elevated platforms and conveyor systems
- To pick, pack, and ship all functions and induct merchandise in a safe, accurate, and productive manner. Associates will be cross-trained in multiple areas
- Perform other related duties, special projects or assignments as required
- Meet quality and productivity expectations
- Safety Conscious
- Flexible and adaptable to change
- Ability to understand and communicate directions in the FC regarding Standard Operating Procedures and security & safety guidelines
- Meet accuracy and productivity standards
- Ability to use multiple radio frequency devices, i.e. hand held scanners
- Ability to learn area-specific functions within multiple systems (Manhattan WMS and Federated proprietary systems)
- Must possess good verbal communication skills
- Works harmoniously and effectively with others as part of a team
17
Equipment Operator Iv Dozers, Medium / Large Resume Examples & Samples
- Completion of approved training course in operating a Medium/Large Dozer (105 hp or higher)
- Current Civil Service employees with Jefferson Parish MUST receive signed verification from an appointing authority of satisfactory, on-the-job training to operate a Medium/Large Dozer (105 hp or higher)
- Less than 1 year
18
Material Equipment Operator NEW PAY Rate PH Resume Examples & Samples
- Deliver product to customers in a prompt, safe, business like, and friendly manner; make deliveries to designated locations; top priority should be given to taking care of the customer’s needs
- Keep truck and associated equipment in proper working order; report any problems to facility management
- Unload trailers, sort freight, and load delivery truck according to route sequence
- Ensure product is in correct location and notify supervisor of any obstacles
- Perform all tasks according to Standard Operating Procedures to ensure a safe work environment for all associates
- Work as a team member by interacting and communicating with fellow associates in a cooperative, constructive manner
- Use of proper safety procedures will eliminate any potential hazards; noise level in the work environment is usually moderate
19
Construction Equipment Operator With CDL Resume Examples & Samples
- Ensure that job materials and equipment are ready before starting work
- Operate construction equipment job to meet job specifications and customer requirements
- Notify Foreman of unanticipated field changes and suggest possible alternatives
- Operate and maintain company vehicles and equipment safely at all times
- Document and record IFTA mileage reports for monthly tax payments by the company
- Participate in weekly toolbox safety meetings and document equipment safety inspection audits
- Valid driver licence with a Class A CDL
- 3 years of construction labor and equipment operating, such as excavator or backhoe, experience
- Adjust to work-related demands without becoming frustrated
- Must be able to travel overnight during the week and occasional weekends
20
Trinity Highway Product Equipment Operator Resume Examples & Samples
- Monitors and adapts processes and scheduling to accomplish manufacturing goals
- Functions as a team leader by directing the work of others
- Solves and identifies complex problems using advanced technical knowledge and creativity
- Trains, instructs and directs work activities of employees
- May influence or impact others' tasks or decisions
- Four to six years of related experience
- Ability to read blueprints
- Ability to operate 3 of the following equipment: press break, shear, punch press, saw drill press or roller
- Understands the technical aspects of the job
- Ability to measure accurately
21
Equipment Operator Class for Braidwood Nuclear Station Resume Examples & Samples
- Monitors recorders and indicators within the control room for the nuclear and turbine generator systems for operation within prescribed limits. Obtains overview data and performs various calculations as required by procedure
- Responds to and takes action as required in mitigating consequences of plant transient. Required to be thoroughly familiar with entry conditions and cautions for the emergency operating procedure and the basis of each step in the procedures. Required to be familiar with the abnormal operating event procedures and system diagnostic and restoration procedures
- Assists shift supervision in the performance of any and all of the duties involved in directing and coordinating the actions of the other personnel assigned to assist in operation of the station
- Please note that naval candidates will need to provide occupation/training awards history, DD214 and the fitness and counseling evaluations with social security numbers and medical documentation removed
22
Equipment Operator Light Resume Examples & Samples
- Responsible for the safe and accurate loading and unloading of heavy equipment to and from project locations in an effective and efficient manner
- Drives truck to destination, applying knowledge of commercial driving regulations and area roads
- Positions blocks and tie rope around items to secure cargo during transit
- Inspects truck equipment and supplies, such as tires, lights, brakes, gas, oil, and water
- May prepare receipts for load picked up
- Safely move and position inventory, supplies, and equipment and determine when load is properly balanced, tied down, and flagged in accordance with company policy, state, and federal regulations
- Maintain safety checklist, trip reports, and other required paperwork according to company policy, state, and federal regulations
- Able to read instructions, numbers, and write legibly
23
River Bend Sand & Gravel Crusher Equipment Operator Resume Examples & Samples
- Operate equipment in a safe manner to support daily crusher activities which includes but not limited to front end loader, skid steer, dozer, excavator, etc
- Operate crusher as directed by crusher foreman
- Reflect a professional appearance and attitude with all work related activities. Encourage professional attitudes and appearances with all subordinate employees. Maintain positive professional relationships with all customers and employees
24
Underground Utility Equipment Operator Resume Examples & Samples
- Install underground sewer, water, & storm drain in trench
- Excavating and/or backfilling utility trenches
- Operating a loader to move pipe & fittings and manage bedding stockpiles
- Some heavy lifting and labor
25
Heavy Construction Equipment Operator Resume Examples & Samples
- Must work safely and follow all safety rules
- Attendance is important, required and expected to ensure crew is able to operate at normal efficiency level
- Must partner with other crewmembers to pave roadways utilizing the roller equipment and must perform additional tasks of other positions per plan specifications as instructed by crew foreperson to ensure daily schedules/estimates are met
- Ability to operate equipment under temperature extremes and for extended hours of time. Must be able to work days or nights as required by project(s)
- Ability to travel to construction project(s)
- Must have attention to detail and emphasis on craftsmanship
- Must understand and be able perform and meet density requirements including PWL
- May be required to use power/and or hand tools needed to complete the jobs within specifications
- Ability to withstand common vibratory motion associated with operation of most roller equipment and occasionally rough terrain
- Ability to be flexible with last minute schedule changes, location changes, time of shift changes. Overtime work required
- Must have Initiative to perform/assist with other positions for job completion
- Position requirements to be met with or without a reasonable accommodation
26
Operator Plant Equipment Resume Examples & Samples
- Completes the site Reactor Operator (Initial License Class)
- Develops planning, organizing, and directing skills
- Practices controlling shift operations
- Develops up-to-date knowledge of plant operating conditions and limitations established by technical specifications and the plant operating license
- Practices performing as an Reactor Operator and performs associated duties while training
- Progresses in knowledge to pass the NRC RO exam and program completion
- Completes and passes any other training course, instruction, event, simulation and on-the-job performance expectation
- Experience:3+years Power plant experience
- Meet eligibility requirements of ACAD 10-001 for Reactor Operator
27
Trinity Highway Equipment Operator Resume Examples & Samples
- Position specialist works with unconventional materials and requires specialized skills
- Loads material for processing
- Assists qualified operators
- Typically has 0-1 years of related experience
- May be used for the new hire or trainee who has no experience
- Receives detailed instructions and close supervision
28
Material Handling Equipment Operator Resume Examples & Samples
- Open doors: Open and set dock and carrier doors to receive trailer, piggyback, containers or rail cars
- Unload/Tally Merchandise: Unload trailers and keep accurate count of cartons received by vendor/SKN number
- Feed Cartons onto Conveyor: Lift carton off pallet and place on appropriate power conveyor
- Manually Push Cartons onto Store Chute: Push carton off conveyor onto a pre-numbered tray/chute or lift carton off conveyor and place on exception conveyor behind sorter position
- Move Merchandise: Operate hand jacks and/or Material Handling Equipment (complete licensing) to remove merchandise to the next designated department
- Load Trailer: Move full pallets onto trailer using hand jack or pallet end rider. Un-stack cartons from pallet to trailer floor to ceiling, filling up the entire trailer
- Secure and Seal Trailer Doors: Open and close shipping and trailer doors, attaching a serial numbered seal and lock each trailer door
- Performance: A receiver/breakdown/loader/stripper must learn and perform all essential functions accurately with minimal direct supervision within 3 weeks after employment
- Other: Any other task or function assigned by a supervisor or member of management
- Cannot be on any form of Formal or Final Counseling
- 6 months or more in your current position
- Must have good attendance record
- Bi-lingual a +plus
29
Equipment Operator Journey Resume Examples & Samples
- Must be able to operate a crane up to 60 Tons
- NCCO certification required
- Forklift, Backhoe and Tractor
30
Construction Equipment Operator Resume Examples & Samples
- Learn and adhere to all safety regulations and actively participate in the safety culture
- Safe operation of construction equipment
- Complete thorough risk assessments and takes actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. Have the ability to adapt quickly in a changing work environment
- Manipulates hand or foot levers to control movements of paving machine that spreads and levels asphaltic concrete on sub-grade of highway and related surfaces such as parking lots, streets, etc., turns hand-wheels to raise or lower screeds, regulates width of creed
- May perform other related duties, such as adding or removing screed extensions, installing or removing automatic devices, grade log or other accessories associated with the machine
- The operator is responsible for the efficient working condition of the equipment and is expected to perform minor servicing and maintenance or refer major problems to the supervisor
- 5 years of heavy highway paving experience
- Or equivalent combination of education and experience
31
Construction Equipment Operator With CDL Resume Examples & Samples
- Install materials for cathodic protection construction projects
- Review field file with foreman and/or project manager to understand job requirements for materials and installation
- Maintain continuous and profitable working relationships with customers
- Attend company-sponsored safety training seminars and educational programs
- 2 or more years of industrial construction laborer experience
- Must possess a CDL Class A License
- Must possess experienc operating Backhoes, Skid Steers, Trenchers, Mini Excavators
- Prefer basic knowledge of electrical, mechanical or cathodic protection systems
- Persist at difficult tasks despite unexpected obstacles
- Must be able to travel overnight during the week, as well as weekends as needed
32
Nuclear Plant Equipment Operator Resume Examples & Samples
- 1 year relevant power plant experience preferably in a nuclear plant (ex: nuclear operations or navy nuclear experience) OR equivalent education in engineering or nuclear technology
- Must be qualified and able to perform the responsibilities and tasks of the position to accurately read, interpret, and comply with company/department procedures, provide attention to detail, and to minimize errors
- Thorough knowledge of operation of pumps, valves, motors, and other power plant equipment
- A basic knowledge of power plant systems and their operation, and health physics procedures
- Able to work a rotating shift schedule
33
Engineering Equipment Operator Resume Examples & Samples
- You may lose consideration for the position if your application does not include all the information and/or documents requested on the vacancy announcement
- Veteran's preference does not apply to positions in this agency
- You must click the Submit My Answers button to submit your application package when you are done. Your Online Qualifications Assessment Questionnaire is not processed – and your resume is not attached – until you click the Submit My Answers button, even if USAJOBS says it sent your resume
- To receive consideration, you must complete the entire process and submit the complete application package by 11:59 PM (EST) on the closing date
- To make sure everything you submitted is successfully received and to verify your application is complete, follow these steps: Log into your USAJOBS account using the following link: https://my.usajobs.gov/Account/Login. Click on "Application Status" and then select the "more information" link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Please Note: Your uploaded documents may take several hours to clear the virus scan process. Verify that all of your documents appear on the Details page with a status of Processed
- You can save your work and come back later. Just click both Save and Logout. To return to an incomplete application, log into your USAJOBS account and select Application Status. Choose the vacancy, and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete
- You can print a copy of this job announcement so that you can read the questions offline
- Obtain and print a copy of the OPM Form 1203-FX, which you will use to provide your answers. You can obtain the form at this URL http://dma.wi.gov/dma/hr/emp_resources/placement/OPM1203fx.pdf or by calling USAJOBS by Phone at (703) 724-1850 – after the introduction, press 1, and listen for instructions
34
Engineering Equipment Operator Helper Resume Examples & Samples
- 465600000
- 17-TEMP-R3-5716-5ENGOH-DT
- Resume that includes: 1) personal information such as name, address, contact information; 2) education; 3) detailed work experience related to this position as described in the major duties including work schedule, hours worked per week, dates of employment; title, series, grade (if applicable); 4) supervisor's phone number and whether or not the supervisor may be contacted for a reference check; 5) other qualifications
- If claiming 10-point veterans preference you must provide the DD214 or certification requirements (see above bullet), plus the proof of entitlement of this preference as listed on the SF-15 Application for 10-point Veterans Preference. The SF-15 should be included but is not required. Failure to submit these documents could result in the determination that there is insufficient documentation to support your claim for 10-point preference. For more information on veterans preference see http://www.fedshirevets.gov/job/vetpref/
35
Engineering Equipment Operator Resume Examples & Samples
- 1-5 Days/Month
- Ability to operate a variety of heavy mobile equipment
- Ability to perform basic maintenance, adjustments, and repair
- Ability to follow oral and written communications
- To fax your documents, you must use the following cover page http://staffing.opm.gov/pdf/usascover.pdf and provide the required information. The Vacancy ID is 1924554
- Your responses to the Assessment Questionnaire, and 2. Your resume or application form and any other supporting documents needed (such as DD-214 [character of service copy] to show Veteran's Preference Eligibility, CTAP/ICTAP documentation and/or transcripts, etc.). 3. Most recent SF-50 (if applicable).4. A copy of your current Commercial Driver's License (CDL) Class "A"
36
Coal Equipment Operator Resume Examples & Samples
- Some knowledge of power plant principles preferred
- Ability to take instructions / directions and translate into actions
- Math / calculation skills
- Ability to read, understand and follow procedures, rules and regulations
37
Dredge Operator / Equipment Operator Resume Examples & Samples
- Maneuvers dredge in and around the excavating area as safety permits and uses hand-levers and foot-pedals inside cab to operate dredge to excavate material
- Performs routine maintenance such as lubricating, fueling, and cleaning
- Operates equipment safely and efficiently to minimize downtime and repair costs
- Performs shift inspection on equipment and communicates defects or needed repairs
- Visually inspects dredge at beginning and end of each shift and as needed
- Operates utility boat to and from the dredge
- Reports equipment condition to quarry maintenance personnel
- Cleans, lubricates, fuels, and services dredge as needed
- Perform repairs to dredge with maintenance personnel as needed
- Performs other duties as instructed by supervisor
38
Paver Operator / Equipment Operator Resume Examples & Samples
- Operate Paver or other heavy equipment as needed
- Loads and unloads equipment and secures equipment on trailer
- Grade or pave experience with understanding of grading, drainage, survey staking, and asphalt compaction highly preferred
- Demonstrates the ability to work independently, without direct supervision
- Demonstrates the willingness to work overtime and weekends/holidays
39
Equipment Operator Dirt Resume Examples & Samples
- May orient the project on the equipment operation
- Make deliveries and pick-ups in a timely manner
- Ensure proper maintenance of the vehicle and report improper operation, faulty equipment, and unusual conditions to Maintenance Manager and supervisor
- May maintain telephone or radio contact with supervisor to receive delivery instructions
- Maintain excellent customer service skill by interacting in a cooperative, positive, and professional manner
- Follow Standard Operating Procedures
- Posses the proper state required drivers license and successfully pass DMV audits
- Plan work
- Experience in movement of construction equipment
40
Operator, Equipment Resume Examples & Samples
- Operate tractors and tractor implements in order to accomplish various vineyard practices such as discing, moving, spreading, spraying, and trimming
- Operate grape harvester during harvest
- May work with mechanic during the off season to do preventative maintenance and upkeep on harvesters and related equipment
- Operate forklifts, ATVs, utility vehicle, trucks, backhoes, bobcats, loaders, and light equipment such as weed eaters and backpack sprayers
- On a daily basis, inspect tractor and/or other equipment before operation and be responsible for notifying supervisor or mechanic when in need of service or repair
- For commercial vehicles complete daily inspection sheets, maintenance inspections and daily driver logs
- May be asked to conduct quarterly BIT inspections
- Calibrate and use agricultural implements such as spray tanks/nozzles and perform necessary adjustment to disks, roto-tiller, etc
- Perform light equipment maintenance as directed
- Apply plant sprays following established safety procedures and provide usage notes for reporting purposes
- May include field irrigation work such as checking lines, cleaning filters, plugging leaks, replacing emitters, and repairing below ground piping
- May perform specialized duties within the vineyard such as pruning, tying, suckering/shoot thinning, weeding, wire movement, leaf & fruit thinning, hand harvest, vineyard layout and irrigation installation
- May perform various maintenance tasks such as trellis repair, hoeing, drainage repair, erosion control, and irrigation repair
- Responsible for compliance with CBI sustainability policies and practices which are economically viable, socially acceptable and environmentally sound. This is done by supporting programs at each location for conservation, energy efficiency, and recycling, which are critical for our operations to achieve tangible environmental results
- Safely-follow safe operating procedures, support safety programs and policies to safeguard personal safety, company property, environmental and team member’s safety
- Minimum 3 years general equipment operation
- Tractor and spraying experience
- Operate Braud Harvester a plus
- Must be able to read English so as to follow operation manuals, safety documents, and signage on equipment
- Must be able to operate a forklift and other machinery
- Must be able to use hand tools
- Valid Commercial Class A CA Driver License required
41
Crusher, Plant Operator / Equipment Operator Resume Examples & Samples
- Basic knowledge of crusher operation, conveyor system and construction equipment
- Equipment operator skills and experience helpful
- Need positive attitude and the ability to work well with others and follow directions
- Ability to work flexible shifts, including weekends and overtime
- Be able to travel with the portable crusher if necessary
42
Engineering Equipment Operator Resume Examples & Samples
- Ability To Interpret Instructions, Specifications, etc. (related to mobile equipment operation)
- Ability To Operate Safely (Non-Motor Vehicle)
- Reliability and Dependability as an Engineering Equipment Operator
43
Engineering Equipment Operator Resume Examples & Samples
- 469455500
- Travel 5-10 nights per month may be required for this position
- Ability to operate a variety of vehicles or heavy equipment
- Ability to operate and maintain machines and tools
- Ability to interpret and apply instructions, specifications, etc. (related to mobile equipment operation)
- Work practices, reliability, and dependability
- SF-50, NOTIFICATION OF PERSONNEL ACTION: Status applicants (transfer, reassignment, reinstatement, promotion, etc.) MUST submit a copy of their SF-50, verifying all of the following: highest rate of pay held, the full performance grade level obtained, and documenting career or career-conditional status in the competitive service (Tenure 1 or 2) for which you are claiming eligibility. This could result in more than one SF-50 to be submitted.DO NOT SUBMIT AN AWARD SF-50. FAILURE TO SUBMIT AN SF-50 VERIFYING STATUS WILL RESULT IN THE APPLICANT NOT BEING CONSIDERED FOR THIS POSITION
- Class A Commercial Driver's License (CDL): Must have and maintain a current CDL. Provide documentation of license with your application
- DD-214: For candidates eligible under the Veterans Employment Opportunity Act (VEOA) you must submit the appropriate DD-214 (Member 4 Copy) documenting your eligibility
- SPECIAL NON-COMPETITIVE APPOINTING AUTHORITIES: For more information on special non-competitive appointing authorities visit
44
Engineering Equipment Operator Resume Examples & Samples
- DD-214, CERTIFICATE OF RELEASE FROM ACTIVE DUTY: If you are entitled to veterans’ preference, you must provide a copy of your DD-214, and you should indicate the type of veterans’ preference you are claiming on your resume. Your veterans’ preference entitlement will be verified by the employing agency
- For 5-point veterans' preference, submit a copy of your DD-214 (Member 4 Copy), or an official statement of service from your command if you are currently on active duty, or other official documentation (e.g., documentation of receipt of a campaign badge or expeditionary medal) that proves your military service was performed under honorable conditions
- For 10-point veterans' preference, please submit a Standard Form (SF) 15, Application for 10-Point Veteran Preference, DD-214, and the required documentation requested by this form
- For information on veteran's eligibility visit: www.opm.gov/staffingPortal/Vetguide.asp
- CTAP/ICTAP: Provides placement assistance to permanent Federal employees who are surplus, displaced or involuntarily separated. Applicants claiming CTAP/ICTAP eligibility must submit a copy of their most recent performance appraisal, documentation of eligibility and most current SF-50 noting position, grade level, and duty location with their application. To be considered under CTAP/ICTAP, applicants must be well-qualified, i.e. meet the minimum qualification requirements, including selective placement factors, education and experience requirements and score at least 85 on the assessment questionnaire as established, and be able to perform the duties of the position upon entry. For information on CTAP/ICTAP, visit: http://www.opm.gov/rif/employee_guides/career_transition.asp
45
Engineering Equipment Operator Resume Examples & Samples
- ABILITY TO DO THE WORK OF A ENGINEERING EQUIPMENT OPERATOR WITHOUT MORE THAN NORMAL SUPERVISION (screen-out element)
- WORK PRACTICES
- SAFE OPERATION OF CONSTRUCTION & MAINTENANCE EQUIPMENT AND MOTOR VEHICLES
- ABILITY TO INTERPRET INSTRUCTIONS AND SPECIFICATIONS PERTAINING TO EQUIPMENT BEING OPERATED
46
Engineering Equipment Operator Resume Examples & Samples
- Work may require travel away from the normal duty station
- Your resume
- Additional required documents (see Required Documents section below)
- ABILITY TO DO THE WORK OF an eNGINEER EQUIPMENT OPERATOR WITHOUT MORE THAN NORMAL SUPERVISION
- SAFE OPERATION OF MOTOR VEHICLES and other equipment
- WORK PRACTICES (INCLUDES KEEPING THINGS NEAT, CLEAN, AND IN ORDER)
- ABILITY TO INTERPRET INSTRUCTIONS & SPECIFICATIONS RELATED TO MOBILE EQUIPMENT OPERATION
- RELIABILITY AND DEPENDABILITY AS AN ENGINEERING EQUIPMENT OPERATOR
47
Trinity Expanded Shale & Clay-mobile Equipment Operator Resume Examples & Samples
- · May be used for the new hire or trainee who has no experience
- Can operate at least a lift truck 6,000-15,000 pound capacity
- Typically has 0 – 1 year(s) of related experience
48
Equipment Operator Light Resume Examples & Samples
- Attaches pulley and blocks to fixed overhead structures, such as beams, ceilings and gin pole booms with bolts and clamps
- May direct workers engaged in hoisting of machinery and equipment onto or off ships, railroad, cars or trucks
- Rate information using standards that can be measured or checked
- Observe flat drawing or diagrams and understand how they would look as a solid object
49
Paver Operator / Equipment Operator Resume Examples & Samples
- Previous asphalt paving operations and/or construction related experience required
- Class A CDL with self-certification of non-excepted interstate and current DOT medical card preferred
- Must pass physical exam and pre-employment controlled substance testing
50
Rewind Operator / Equipment Operator Resume Examples & Samples
- Set up and operate rewinding equipment according to procedures and job specifications
- Troubleshoot problems and perform routine equipment upkeep as required
- Monitor quality of finished product according to job specifications and quality standards
- Meet standards for output and waste
- Prepare cartons and pack finished product
- Handle labels so as to prevent any damage or errors on finished labels
- Complete required paperwork (work orders, equipment logs, etc.)
- Prioritize work schedule as necessary to minimize production down time
- Follow safety procedures
- Maintain work area in organized manner
- Good verbal communication skills are required to coordinate the rewinding process
- Ability to meet physical demands of the job (lifting up to 65 pounds, prolonged standing)
- Ability and willingness to perform repetitive work
- Ability to follow precise detailed job specifications
- Math skills including addition, subtraction, multiplication, and division
- Demonstrated ability to maintain consistently good attendance and punctuality
51
Equipment Operator Heavy Resume Examples & Samples
- Cleans and maintains tools and equipment. Assist in erection and removal of barriers
- Will be required to perform emergency services during and following normal duty hours
- Must conduct container and documentation validation and inspection
- Documents cargo utilizing both manual and automated data processing systems
- Maintains data sheets relating to the movement, storage and location of containers
- Performs other duties and assignments as assigned
- MS Office suite expertise is required as well as excellent oral, written and presentation skills
- Fluent in English as exemplified in writing and in verbal skills
- Must be able to work independent and as a team member
