Construction Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the construction engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

A Quitzon

Augustine

Quitzon

76737 Ernie Ports

Philadelphia

+1 (555) 475 9455

76737 Ernie Ports

Philadelphia

Phone

p +1 (555) 475 9455

Experience Experience

Houston, TX

Construction Engineer

Houston, TX

Ernser-Murphy

Houston, TX

Construction Engineer

Recognise areas for improvement and communicate them to senior management to ensure continual improvement
To assist project management team by reporting on EPC Contractor’s activities which may have an effect on any delays, abortive work or potential claims
Develop, prepare and execute work plans for the construction activities
Work closely with all engineering groups in the Network team including RF Design, Traffic, Real Estate, Construction, Operations, and System Performance
Attend construction meetings and working meetings for the development of civil works aspects for the ITER project
Assist the Resident Construction Manager with the management of field changes with AWR/Change Order and engineering procedures
Provide direction and leadership to the Contractor works scope in respect of piping works, both above and below ground

Dallas, TX

Lead Construction Engineer

Dallas, TX

Trantow, Yundt and Schmidt

Dallas, TX

Lead Construction Engineer

Responsible for site engineering activities and providing technical assistance to the construction supervision team
Provide technical assistance to the construction supervision team and responsible for site engineering activities
Ensure assigned work is managed and delivered to KNPC satisfaction
Provide leadership, guidance and direction concerning all facets of construction, completions and their delivery
Enhance and demonstrate commitment to raising HSE standards and proposing new initiatives or improvements
Create and sustain a good team spirit within the Amec Foster Wheeler project team and KNPC
Monitor, appraise and report to KNPC on quality and safety construction performed by the EPC Contractor and their Subcontractors / Vendors

present

Boston, MA

Senior Construction Engineer

Boston, MA

Bartell and Sons

present

Boston, MA

Senior Construction Engineer

present

Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work
Implement working to the relevant site or national agreements and establish working conditions, welfare facilities, safety plan and other related matters
Ensure the Contractor work scope is managed, controlled and risk assessed by the Permit to Work
Ensure the Contractor work scope is managed, controlled and risk assessed by the Permit to work
Ensure all preparatory work is completed prior to commencement of work
Conduct work site inspections and ensure qualiy of work meets contract standards
Conduct work site inspections and ensure quality of work meets contract standards

Education Education

Bachelor’s Degree in Engineering

The Ohio State University

Bachelor’s Degree in Engineering

Skills Skills

Supervises quality control and oversees the fulfillment of applicable building codes, FDA regulations, etc
Working knowledge of basic survey and layouts
Strong people skills, ability to interact with the design team
Strong planning and co-ordinating ability
Strong interpersonal skills with the proven ability to build and establish rapport with a diverse array of people
Reasonable presentation skills and ability to provide training
Ability to work with and grow in a team environment
Knowledge and understanding of management operating systems
Ability to communicate effectively with contractor's/line managers/ and supervision in English language (oral and written)
Ability to understand logic linked schedules (P3/P6 or similar)

Create a Resume in Minutes

15 Construction Engineer resume templates

Read our complete resume writing guides

Construction Engineer Resume Examples & Samples

Experience in all duties as site consultant engineer including checking submittals by contractors, coordination between various disciplines/contractors to ensure construction quality and design compliance
Thorough knowledge of construction specifications. Knowledge of FIDIC and similar construction contracts will be an advantage
Knowledge of international and local best practices and building codes in design and delivery of large scale projects
Confident in Client & Contractor interfacing, managing and coordinating with a team of specialists

Construction Engineer Resume Examples & Samples

Provide project management support in the maintenance/repair of campus building systems and hardscapes
Provide engineering input to facilities in resolutions of issues involving physical building systems and hardscape
Represent the Institute in damage insurance claims associated with campus facilities; collect/submit reports and records and facilitate claim resolution
Manage the Facilities Condition Analysis (FCA) program
Manage the preparation of the Major Rehabilitation and Repair (MRR) funding submittal
Identify, submit, and manage contracts; identify and purchase materials; maintain purchase records
Review building operations on an ongoing basis to monitor compliance with applicable regulations and codes
Education:Bachelor's degree in Engineering, Engineering Technology, Architecture, Architecture Technology, or related field or equivalent combination of education and experience
Work Experience:Four to five years job related experience
Certifications:Eight to ten years job related experience
Skills:This job requires knowledge of engineering principles and practices as they apply to structural and hardscape systems including application in field operations. Additionally, knowledge and skills in procurement, communications, planning and use of basic and specialized computer applications and systems is required. Training and experience with computer aided drafting and design
Preferred Education:Master's degree in Engineering, Engineering Technology, Architecture, Architecture Technology, or related field
Preferred Work Experience:Eight to ten years job related experience
Preferred Certifications:Fundamentals Examine (FE) or Engineer-in Training (EIT) Certified, Professional Engineers License, Professional Architectural License, State Trade License
Preferred Skills: N/A

Construction Engineer Resume Examples & Samples

Mechanical Engineering degree
Experience in Engineering/Construction companies operating in industrial plants sector
Knowledge of Microsoft Office Applications
Excellent English and Turkish language knowledge is required

Senior Piping Construction Engineer Resume Examples & Samples

To ensure that all Project/Company HSE goals are achieved and where possible exceeded
To ensure that all construction personnel at Project level are aware of / implement safe working practices / procedures and are provided with a safe working environment
Deliver a high standard construction capability at Project level, ensuring a consistent and efficient approach is implemented at all times
Ensure contents of work packs meet with scope requirements
BOSIET / Approved Offshore Medical / MIST / EBS - as this role may involve offshore visits

Construction Engineer Resume Examples & Samples

Understands application of the current project methodologies and EPC Contractor execution strategies
Communicating the Project safety standards, site rules and regulations as captured in the PMC and EPC Contractor’s HSSE plans to all personnel
Ensuring overall construction is executed in accordance within applicable specifications, drawings, codes and standards and to the requirements of the Contract
Participating in regular on-site EPC Contractor progress meetings, at interface coordination meetings and attend other project meetings as required
Ensuring work and quality related inspections are carried out in accordance with approved Inspection and Test Plans
Understand and responsible for managing the site safety rules for the defined plant area and responsible for the EPC Contractor scope to be executed including all the interfaces and safety requirements
Technically review construction documentation issued by EPC Contractor
Ensure accurate progress reporting of physical scope completion and endorse as necessary daily progress report and time sheets
Detail the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work of the EPC Contractor
Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data
Must be BS in Engineering graduate
Minimum Industrial experience : 12 years
Experience in similar position : 5 years
Experience in PMC / EPC organizations in the field of Refinery / Petrochemicals industries in handling construction work of major projects of value not less than US $ 500 million each
Strong Supervisory skills

Senior. / Lead Construction Engineer Resume Examples & Samples

Understand and responsible for managing the site safety rules for the defined plant area
Understand and responsible for the EPC Contractor scope to be executed including all the interfaces and safety requirements
Participate in joint walk downs of systems for handover to commissioning and Operations
Support to commissioning department for functional commissioning
Attend contractor progress meetings, respond to, and evaluate field changes with assessment of any impact on cost and schedule
Condust work site inspections and ensure qualiy of work meets contract standards
Attend Contractor progress meetings
BSc. University degree in any of the main Engineering disciplines. i.e. Mechanical, Civil, Electrical, Chemical or equivalent
Minimum 5 years of experience in a similar position as Senior Field Engineer / Senior Construction Engineer in a multidiscipline workforce

Construction Engineer Resume Examples & Samples

Create and sustain a good team spirit within the project team, KNPC, and EPC Contractor
Provide guidance and direction concerning all facets of construction, completions, and their delivery
Review project studies & proposals for constructability and/or construction hazard identification
Assist in the resolution of technical queries arising at site
Assist in the review and approval of sub-contractors method statements
Review “as built“ drawings
Monitor, appraise, and report to KNPC on quality and safety construction performed by the EPC Contractor and their Subcontractors / Vendors
B.Sc. Engineering degree
Minimum eight years post graduate experience
Minimum four years experience in the oil & gas, refining, and petrochemical industries

Construction Engineer Resume Examples & Samples

Maintain a good working relationship with the clients and sub-contractors engineering representatives
Primary contact with the project office to ensure site is in receipt of latest drawing, specifications and information
Assist in the resolution of technical queries arising on site
Supervise vendor representatives site unite for check out / precommissioning of equipment and any other special testing or maintenance requirements
Fully familiar with the drawings, specifications and engineering procedures of the project
Assist in the review and approval of sub-contractors method statement
Approval of final “as built" drawings
Read, understand and implement the company safety policy and the arrangements described in the company and area safety management documents
Review project studies and proposals for constructability and / or construction hazard identification
Graduate of Bachelor of Science in Engineering, degree or equivalent in Civil Engineering
Minimum 10 years post graduate experience
Minimum 5 years work experience in the oil and gas, refining and petrochemical industries
Minimum 5 years experience with the same designation
Self-motivated and able to clearly communicate with client and contractors at all levels
Reasonable presentation skills and ability to provide training
Reasonable written communication skills

Construction Engineer Resume Examples & Samples

Bachelor’s of Science in Engineer or Construction Management
Certifications and/or Licensed P.E. in Washington preferred but not required
10 years+ of proven, progressive experience
WSDOT roadway and bridge construction experience required
HDR is a drug and alcohol free environment; the candidate must successfully pass drug-screening procedures prior to being hired; thereafter subject to random and cause drug and alcohol testing

Construction Engineer Resume Examples & Samples

Construction supervision and co-ordination of the work at site to maximize the effectiveness of construction delivery to time, budget and quality objectives
Monitor, review and approve construction documentation to support timely construction installation and completion
Liaise with the EPC Contractor as directed and assist in the resolution of technical queries arising at site
Ensure assigned work is managed and delivered to KNPC satisfaction
Assist in the review and approval of sub-contractors method statements, review “as built“ drawings
B.Sc. Engineering Degree
Minimum 8 years post graduate xperience
Minimum 4 years experience in the Oil & Gas, Refinery & Petrochemical industries
Must have HSE awareness and commitment

Construction Engineer Resume Examples & Samples

Insure project engineering activities comply with company and contract requirements and support overall construction schedule
Provide technical support for construction effort including participation in construction planning and design; interpretation of design; application of construction methods; resolution and documentation of design conflicts; constructability reviews, etc
Develop implement and administer project engineering procedures and other work controlling documents
Interface all on-site departments as required to resolve problems, ensure quality of construction, etc. in support of overall project schedule
Perform additional assignments per supervisor’s direction
Additional responsibilities will be defined in the relevant process procedure

Construction Engineer Resume Examples & Samples

Engineering Degree / Diploma in Mechanical Engineering with 6 to 10 years working experience with reputed consultant / EPC contractor
Working experience as a Lead in execution of Mechanical/ Piping works for Chemical, Petro chemical, Refinery, food and pharma sectors
Profound knowledge on IS code, ASME standards requirement as well as standard Mechanical/ Piping engineering practices

Construction Engineer Resume Examples & Samples

Develop and execute strategies and plans for a variety of building equipment and systems including, but not limited to, mechanical, HVAC, electrical distribution, and associated monitoring and control systems. Manage internal and external relationships
Provide input to expense and capital project budgets, participate in budget review meetings, and review year-end accrual reports. Assist in developing the Capital Improvement Plan as it relates to the facility's mechanical and/or electrical infrastructure
Oversee vendor services. Collaborate with team members, Procurement, and senior management in soliciting, evaluating, and negotiating vendor agreements
Ensure that systems operate and are maintained within corporate, regulatory, and safety parameters. Monitor records maintenance. Represent company in interactions with government or regulatory officials
Respond to escalated and sensitive inquiries and other requests for data. Document and analyze interactions. Report results. Ensure positive outcomes
Design, develop, and maintain processes to track, monitor, and report activities. Evaluate results. Present insights and best practices
Conduct research and analyses. Report findings
May participate in relatively large or complex development, maintenance, installation, or other projects
6+ years of related experience
Must have 6+ years of construction management experience
Knowledge of the practical applications of engineering. Knowledge of materials, methods, and the tools involved in the design and maintaining of Class A Office buildings (including systems and interior)
Knowledge of business, construction and project management processes involved in strategic planning, scheduling, cost control, quality control, testing, commissioning, resource allocation, leadership technique, production methods, and coordination of people and resources
Experience in working with 3rd party contractors and project management - adjusting actions in relation to others and gaining input and buy in from others
Experience preparing status reports, option analysis, change order analysis and recommendation, etc. for all levels of the organization
Experience identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Construction Engineer Resume Examples & Samples

The Construction Engineer manages project development from initial site design through as-built drawings. Primary projects include small cells and ODAS projects. This may include other cell sites, In Bound Collocations, and In Building projects. Responsibilities including drawing review for compliance with civil, structural, mechanical, and electrical standards
Responsible for project feasibility, value engineering, zoning, FAA/FCC survey work, drawings, certifications, permit approvals, and contract administration
The position manages construction activities related to the development of multiple, simultaneous network infrastructure projects including distributing bid packages, coordinating bid walk; awarding job; and monitoring progress; providing regular status updates; and resolving issues
Provides full financial management of all projects from initial proposal/bid through receipt of final product or service; funding projects; processing purchase orders; reviewing work; and ensuring payment and final balance in purchasing software
Evaluates new products, services, and vendors. Weighs the pros and cons, including impact to the system, costs, compatibility, ease of use, reliability, timing parameters
Interfaces with internal and external departments as well as regulatory agencies by interacting with municipal agencies in the pursuit of building permits, construction inspections, and by finally obtaining certificates of occupancy for network facilities. Develop the skills and ability to represent the company at municipal hearings if needed in support of the Real Estate group
Partner with MTCE with the development and timely distribution of standards and directives
Vendor Management – facilitate training of current and new vendors. Develop quality measurements, standards, and guidelines for the DAS and Venue vendors. Work with management to ensure that the region has a healthy pool of vendors, Construction managers, and installers to support the growing number of projects
Establish and maintain effective working relationships with peers, executive leadership, clients, and key contacts within other departments in Verizon Wireless and outside vendors and customers
Ensure small cell construction projects are completed within compliance, standards, and guidelines set within Verizon Wireless
Partner with other small cell teams in other regions and Area to ensure best practices are being shared
Facilitate and coordinate utility and power coordination with power companies such as PGE, SCE, SMUD, etc. This involves coordinating the bi-weekly calls with PGE
Manages and facilitates the bidding of construction projects and other work related to construction for small cell team. Utilize Xpress Tool in the bidding process
Manage the post NTP tasks in Siterra. Work with other CX Engineers and vendors to ensure that Siterra tasks are completed on time
Coordinate with the Equipment Engineers to ensure equipment is ordered timely, no construction is delayed due to lack of materials, and CIP is kept at 18% or less
Bachelor’s degree in Engineering, Business or Computer Science
A minimum of 5 years of experience in the cellular or telecommunications industry
A minimum of 5 years of experience as a Construction Manager or Construction Engineer working with tower companies, macro new builds, small cells, Right of Ways, and other wireless infrastructure projects
Must have experience with macro, micro, ODAS, and related systems, HVAC, emergency generators, National Electrical Code requirements, environmental requirements including hazardous material, spill prevention, and other regulatory guidelines, general building maintenance, and vendor maintenance
Proficient with Siterra

Construction Engineer Resume Examples & Samples

Manages regional network projects related to distributed antenna system (DAS) installations, new builds, small cells and existing system upgrades
Manage construction from initial site design through completed drawings including drawing review taking into account civil, structural, mechanical, and electrical feasibility; value engineering, zoning, Phase 1/2 environmental, certification, signoff, and change orders
Manages construction activities related to the development of multiple, simultaneous Network infrastructure projects including; RFQ or RFP process, Contract process, Sealed bid , Distributing bid packages, Coordinating bid walk, Awarding project, Monitoring progress, Providing regular status updates, Resolve issues
Works with outside vendors on project scope, obtain quotes, design and plans to meet VZW standards, local code requirements and project schedules
Work closely with all engineering groups in the Network team including RF Design, Traffic, Real Estate, Construction, Operations, and System Performance
Provide full financial management of all projects from initial proposal/bid
Manage outside vendors and contractors to effectively meet shipping and installation commitments
Ensure departmental compliance with company procurement and equipment installation policies
Provide team leadership and guidance by practicing Core Values including: creating and evaluating ways to gain financial efficiencies; creating process improvements; securing assets; and being accountable for vendor payments
Facilitates weekly routine planning and working sessions with critical stakeholders and regional Operations Managers to review project scope, define issues, and develop deliverables and associated timelines
Provides regular project status reports to management and the project team
Establish quality assurance methods, procedures, standards, and technical training related to site design and construction. Evaluate new products, services, and vendors
Reviews Close Out Packages to ensure projects are completed with high quality and according to the project scope. Weigh the pros and cons, including impact to the system, costs, compatibility, and ease of use, reliability, and timing parameters
Bachelors Degree in Engineering or Management preferred
5 to 10 years of experience in construction preferred
Detailed knowledge of cell RF, electrical and mechanical design, including equipment configuration, TELCO interface, DC power systems, lightning protection and grounding
Knowledge of RF materials (jumpers, antennas, diplexers, RRH, cable, PIM, sweep tests) and ALU modular equipment preferred. Develop the skills and ability to represent the company at municipal hearings if needed
Construction Management skills including: AutoCAD/design review, implementation, HVAC, emergency generators, National Electrical Code requirements, environmental requirements including hazardous material, spill prevention, and other regulatory guidelines, general building maintenance, vendor maintenance and project management and financial management
Power experience including: DC power systems, AC UPS systems, and corresponding distribution systems, troubleshooting
Mission Critical Data Center design/engineering, construction and operation
Proficient in office computer applications: Excel, Word, PowerPoint, and Access
Excellent decision making and problem solving skills desired
Above average project management skills desired
Strong analytic, interpersonal, and communication skills desired
Ability to communicate clearly and concisely
Ability to work under pressure and deal effectively with situations
Excellent leadership skills preferred. Flexible by embracing change; adapting communication style to setting; investigating and- implementing alternate approaches to resolve difficult problems
Excellent organizational and planning skills desired

Lead Construction Engineer Resume Examples & Samples

Assign permanently to the project as a key member of Amec Foster Wheeler’s Al-Zour LNG Import Project PMC team
Monitor, review and approve key construction documentation to support timely construction installation and completion
Monitor, progress and review construction installation and completions by the EPC Contractor at site
Liaise with the EPC Contractor as required on behalf of KNPC and participate in key KNPC reviews and meetings as required
Enhance and demonstrate commitment to raising HSE standards and proposing new initiatives or improvements
Create and sustain a good team spirit within the Amec Foster Wheeler project team and KNPC
Provide leadership, guidance and direction concerning all facets of construction, completions and their delivery
Monitor and review construction related documentation originated by the EPC Contractor
Monitor and review the EPC Contractor’s and their Subcontractors construction activities including resourcing thereof
Liaise with assigned geotechnical & marine and tankage PMC support subcontractors
Interface with KNPC and the EPC Contractor for formal and informal reviews on construction and safety related matters
Responsible for site engineering activities and providing technical assistance to the construction supervision team
Coordinate and resolve field construction queries interfacing with engineering and completions
Assist in the review and approval of sub-contractors method statements, approval of “as built “drawing”
Monitor, appraise and report to KNPC on quality and safety construction performed by the EPC Contractor and their Subcontractors / Vendors
Bachelor of Science / Engineering Degree
Minimum 12 years post graduate industrial experience
Minimum 8 years experience in refinery and/or petrochemical industries
Functional management, leadership and teambuilding skills
Strong HSE awareness and commitment

Construction Engineer Resume Examples & Samples

Lead the site supervision team on the Hue project
Involvement in contract-related matters on the project
Coordination amongst all parties including contractors, clients and teams from other disciplines eg electrical, process mechanical, building systems mechanical and instrumentation & control designers
Attendance in meetings, discussions with clients, contractors and to lead in technical and progress discussions
BSc, Civil Engineering and ideally MSc in a relevant discipline
15 years of post-graduate experience
05 years of experience in similar capacity
05 years of experience on projects involving construction supervision of storm drains, sewers, and combined storm overflows in an urban context
05 years of experience in developing countries, preferably Vietnam
Familiarity with MS project including establishment of baseline, and monitoring of progress in relation to baseline
Familiarity with preparation of Power Point presentations
Good client relationship and team building skills
Proven track record of establishing quality control systems and procedures, and maintaining high standards of quality and output from Contractors
Experience of dispute resolution and avoidance

Construction Engineer Resume Examples & Samples

Monitor the assigned construction scope to ensure that the company and contractors perform all work to the agreed standards for safety, health and environment, and demonstrate a commitment to attain high levels of HSE (Health, Safety & Environment) performance
Participate in and advise on all construction activities and initiatives, including provision of training / inductions, documentation reviews, etc
Ensure assigned activities and scope of work is carried out without any significant HSE incidents
Company’s reputation is enhanced by demonstrating commitment to raising HSE standards and proposing new initiatives or improvements to enhance HSE performance throughout the client project
Serve as primary contact with the project office to ensure site is in receipt of latest drawing, specifications and information
Supervise vendor representatives site unit for check out / pre-commissioning of equipment and any other special testing or maintenance requirements
Minimum Bachelor of Science in Engineering, degree or equivalent in Mechanical Engineering
Minimum 5 years’ work experience in the oil & gas, refining and petrochemical industries
Minimum 5 years’ experience with the same designation

Construction Engineer Resume Examples & Samples

Understand application of the current project methodologies and EPC Contractor execution strategies
Ensure overall construction is executed in accordance within applicable specifications, drawings, codes and standards and to the requirements of the Contract
Participate in regular on-site EPC Contractor progress meetings, at interface coordination meetings and attend other project meetings as required
Ensure work and quality related inspections are carried out in accordance with approved Inspection and Test Plans
Understand and be responsible for managing the site safety rules for the defined plant area and responsibilities for the EPC Contractor scope to be executed including all the interfaces and safety requirements
Must be BS in Mechanical Engineering

Senior Construction Engineer Resume Examples & Samples

Understand and ensure the EPC Contractor and Sub-contractors adhere to the site safety rules within the defined plant area
Understand, review and responsible for the EPC Contractor's scope, including all relevant interfaces and safety requirements
Ensure the EPC Contractor work scope is coordinated, controlled and risk assessed by the Permit to work
Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work
Ensure all preparatory work is completed prior to commencement of work
Ensure accurate progress reporting of physical scope completion
Attend contractor progress meetings
Respond to, and evaluate field changes with assessment of any impact on cost and schedule
Conduct work site inspections and ensure qualiy of work meets contract standards
Participate in joint walk downs of systems / sub-system handover for pre-commissioning and commissioning teams
Provide support to commissioning department for functional commissioning

Lead Construction Engineer Resume Examples & Samples

Assigned permanently to the project as a key member of AMEC’s Fifth Gas Train PMC team
Liaise with the EPC Contractor as required on behalf of KNPC
Ensure assigned work is managed and delivered to KNPC satisfaction, enhance and demonstrate commitment to raising HSE standards and proposing new initiatives or improvements
Monitor and review the EPC Contractor’s and their Subcontractors' construction activities including resourcing thereof
Responsible for site engineering activities and providing technical assistance to the construction supervision team, assist in the resolution of technical queries arising at site
Review “as built“ drawings and assist in the review and approval of sub-contractors method statements
Minimum 15 years post graduate experience
Minimum 8 years experience in the oil & gas, refining, and petrochemical industries

Assistant State Construction Engineer Resume Examples & Samples

Bachelor of Science in Civil Engineering, OR EIT Certificate AND four years of Professional Engineer experience
At least four years as a Project Engineer OR Assistant Project Engineer AND two years as a Project Engineer
Professional Engineer License in Washington State
Prior working knowledge of contract administration with WSDOT Specification and standards; AASHTO/ASTM Standards; Construction practices and methods; State and federal contacting laws; Construction Materials and Legislative process
Ability to communicate effectively and facilitate collaboration with a wide variety of stakeholders
Ability to determine risk levels and make decisions on complex engineering and contract administration issues
Facilitation skills to help resolving disputes between the State and contractors
Ability to traverse uneven terrain in adverse weather conditions
Prior experience coaching and mentoring staff
Ability to travel with some overnight stays

E&I Construction Engineer Resume Examples & Samples

Preparation of Electrical & Construction Workpacks
Preparation of Construction Jobcards
Participation in Constructability & Design Reviews
Visit offshore assets for surveys
Interface with clients onshore asset team

Construction Engineer Resume Examples & Samples

Lifting 30+ pounds
Climbing ladders and scaffolds
Crawling

Nightshift E&I Construction Engineer Resume Examples & Samples

Preparation of work packs including TRA’s, JMS, materials, peer reviews, HAZIDS, Envid’s, COSHH, testing requirement, specialist tools and equipment, also identify specialists/vendors to perform identified tasks
Experienced in the production of detailed and accurate reports, technical queries, material requisitions and all other work pack related documents
Desire to learn and develop – open to innovation

Construction Engineer Resume Examples & Samples

Monitor the assigned pre-commissioning / commissioning scope to ensure AMEC and Contractors perform all work to agreed standards for safety, health and environment and demonstrate a commitment to attaining high levels of HSE (Health, Safety & Environment) performance
Participate in and advice on all commissioning activities and initiatives, including provision of training/inductions, documentation reviews etc
Responsible for site commissioning activities and providing technical assistance to the construction / commissioning team
Co - ordinate KOC requirements for training and commissioning assistance
Primary contact with the project office to insure site is in receipt of latest drawing, specifications and information
Assist in the resolution of technical queries arising on site during commissioning
Supervises vendor representatives site unite for check out / precommissioning of equipment and any other special testing or maintenance requirements
Approval of final “as built“ drawings
To read, understand and implement the company safety policy and the arrangements described in the company and area safety management documents
Review project studies & proposals for Constructability and / or Construction Hazard Identification
BSc Engineering plus 8 years total experience, 5 years oil and gas and 5 years in a related designation
Self motivated and able to clearly communicate with KOC and contractors at all levels

I&E Construction Engineer Senior Resume Examples & Samples

Serve as the primary BASF interface to the construction contractors, project team, operations, and engineering groups; especially with regard to installation and execution activities and resolving field problems
Provide technical expertise and consultation (constructability) in the design, contract development/bidding, and construction phases of projects
Coordinate site visits, interpret bid specifications, and explain site specific security and safety regulations
Provide and maintain a safe worksite through pro-active involvement with contractors to prevent accidents and injuries. Conduct incident investigations if necessary
Monitor contractors and provide guidance to ensure full understanding of the scope and minimize construction claims
Inspect construction work to ensure that job schedules are maintained and that work is being performed safely and consistent with codes and design specifications
Document field activities and produce necessary reports on a weekly and monthly basis
Coordinate duties of other construction engineers and/or contract inspectors
Support Project Team in the review and authorization of field changes
Verify and approve invoices to validate accuracy of work performance and/or equipment delivered, and recommend approval for payment
Participation in professional organizations related to chemical plant construction
Journeyman Electrician License in State of Texas
Knowledgeable in NEC (National Electric Code)
Knowledgeable in NFPA 70 (National Fire Protection Association) – arc flash requirements
Knowledgeable with high voltage requirements/installations practices

E&I Construction Engineer Resume Examples & Samples

Administer and direct all construction activities for assigned projects in order to achieve project goals
Serve as principle BASF representative to the Construction contractor on assigned projects as well as monitor and report contractor performance in regard to safety, progress, cost, and quality of work
Continually inspect Contractor’s work to assure that job schedules are maintained and that work is being performed safely, efficiently, and per design specifications. Also be responsible for testing and acceptance of work performed by the contractor
Conduct or participate in meetings for bidding and awarding contracts, construction progress, and resolution of problems
Work with contractors to coordinate activities such as personnel access to the site, material deliveries, permitting, and resolution of conflicts. Ensures that Contractors have been informed on all aspects of the project and site requirements
In cooperation with Project Managers and Engineers, authorize and make necessary field changes being constantly vigilant to ensure that quantity and quality of materials, equipment, and contract labor meet BASF specifications
Maintain close liaison and check on contractors to make sure that they fully understand the scope of the work and to keep claims for extra compensation down to a minimum. In general, must be extremely cost conscious to obtain maximum value with maximum economy for the Corporation on construction projects
Verify contractor invoicing is in accordance with the contract terms and conditions and accurately represents the work performed
Participate in contractor-related incident investigations and corrective action follow-up

Construction Engineer Resume Examples & Samples

Supervises vendor representatives site unite for check out / pre-commissioning of equipment and any other special testing or maintenance requirements
Approval of final “as built “drawings
Review project studies & proposals for Constructability and/or Construction Hazard Identification
B.Sc. Engineering plus 10 years Total experience, 5 years Oil and Gas Experience and 5 years in related Designation
Must be graduated in Civil or Mining Engineer
Must have managed large sized projects in Oil & Gas Industry or Mining Industry including safety works leading a Team and shall have Pre-commissioning and commissioning and performance testing experience
Preferable to be highly familiar with heavy equipment fleet management and large earth moving activities
Must have a minimum recent two (2) years’ experience with Contractor in the similar position

Principal Construction Engineer Resume Examples & Samples

Degree or Diploma in Civil with 10 to 15 years of experience in industrial projects in Refinery and Petrochemicals Sectors
Shall be conversant with sequence of underground activities, piling, earth work, soil sampling, a compaction, concreting, related quality control measures for a medium / large size project
Should be able to independently handle construction contractor and manage a team of personnel at site
Candidate must have focus on safety, schedule and quality aspects of the project and able to guide the contractor
Through knowledge of civil and underground works in Process plants and Offsite / Utilities
Should be able to work as a team leader / member, willing to take responsibility, with good interpersonal skills
Good verbal and written communications are essential

Senior Construction Engineer Resume Examples & Samples

Developing construction scopes onshore
HS & E reporting
“Hand On & Off” Working Imperative
Detailed Daily Reporting
Highlight technical issues through TQ or EQ process depending on relevance
Deliver offshore work scopes in a timely manner
Drive and take control of the permit to work system related to workscopes
Build strong client working relationships and with the onshore focal point
Check equipment prior to mobilization
Liaise with the fabricators
Integration with engineering disciplines
Manage vendor, reporting and timewriting
Compile, review and develop work packs (specifically black trade) in accordance with the implementation process, associated standards, specifications and procedures
Constructability Reviews
Valid BOSIET / MIST / EBS / Offshore Medical
Previous offshore experience
Significant experience in similar role plus recognised discipline trade qualifications
Conversant with the work pack process, including familiarity with TRA, Peer Reviews, HAZID’s/ENVID’s, COSHH processes

Senior Construction Engineer Resume Examples & Samples

Works with contractors and state permitting offices on construction projects
Takes appropriate corrective action, interfacing with vendor, carrier, client and staff as necessary
Works with appropriate States, vendors and customers to obtain necessary permits
Obtains contracts and Insurance certificates from sub-contractors
Works with Engineering and Software teams to diagnose, test and find potential opportunities for better performance or cost savings of system design of build specifications

Construction Engineer Resume Examples & Samples

Coordinate with Contractor, Client, and Staff daily to ensure the project is constructed in accordance to the plans and specifications
Maintain proper documentation of the work
Prepare and develop change orders
Review and check inspectors pay quantities
Attend progress meetings and take notes
Review and make recommendations on contractors submittals
Investigate and prepare necessary design changes to the plans
Oversee and develop lower staff
Be active with local engineering groups
Supervise project staff
Track budgets
5+ years working in construction management of TxDOT Highway and Bridge Projects
Site Manager (Experience in use and ability to train others)
ACI would be a benefit

Construction Engineer Resume Examples & Samples

Construction industry experience
Background experience of Turnarounds and schedule challenged projects
A basic understanding of construction processes and methods
Proficiency with spreadsheets, development and maintenance of procedures and processes used in the construction industry
Experience working in sub-contractor, principle contractor and client positions
Experience of BP construction processes
Proven track record of safe construction delivery
Knowledge of BP HSSE requirements
Knowledge of BP CoW process
Experience with gated construction execution processes
Strong planning and co-ordinating ability

Construction Engineer Resume Examples & Samples

Report to the Resident Engineer
Manage and oversee day-to-day construction activities in specific scope/area of work in accordance with CM Contract, and ST’s policies and procedures and in accordance with the GCCM contract
Provide ad-hoc field inspection as/if required
Ensure contractor contract compliance with construction activities
Identify potential change issues and oversee emergency or urgent change work and track cost-reimbursable and/or time and materials work
Review and respond to contractor submittals, requests for information, requests for change and other documentation pertaining to specific scope/area of work
Coordinate with Resident Engineer and other Construction Engineers on project progress and issues
Review all Construction Work Plans, and participate in readiness review meetings
Coordinate with all special/third party inspections
Assist in weekly construction progress meetings, as-built reviews, quality meeting, safety meetings
Review pay applications pertaining to specific scope/area of work
Review and provide responses/input to project schedules pertaining to specific scope/area of work
Coordinate with the RE and assign inspection staff to adequately cover the work
Review and approve the daily inspection reports of CMC inspection staff and the contractor documenting the inspection, testing and other on-site activities
Coordinate with CM safety staff and monitor the contractor’s compliance with its own safety programs and that CMC safety staff complies with its safety program
Participate in the weekly Safety Walk
Manage and oversee all seismic retrofit work on existing WSDOT structures including, but not limited to
Post tensioning of existing bridge spans
Fiber Reinforced Polymer (FRP) wrapping of existing concrete bridge columns
Heavy, steel plate gusset installation
Track-bridge retrofit and installation
Micropile, pile cap, concrete and foundation upgrades
Monitor and ensure compliance with TESC, stormwater management and other environmental requirements/commitments
Monitor and ensure compliance with noise and vibration limitations
Coordinate with other Construction Engineers as necessary
5-7 years of relevant experience required
MS Office skills (Word, Excel, PowerPoint) required
Engineering or technical degree preferred and/or relevant professional certification (CMAA, PMP etc.)

Construction Engineer Resume Examples & Samples

Manage and oversee all mechanical and electrical work throughout the alignment including, but not limited to
Electrical modifications within the existing floating bridge
Mechanical and electrical upgrades and installations within the existing Mount Baker Tunnel and Mercer Island Tunnel
Electrical, mechanical, EVS and BMS installation in the Judkins Park and Mercer Island Stations
ITS modifications on the existing roadway
Installation of the trackbridge monitoring system
Tie-in to the existing operating light rail system
Coordinate with the CMC’s Commissioning Agent during commissioning and start-up of all systems
Coordinate with the CMC’s Cathodic Protection specialist during installation/modifications to the cathodic protection systems
Coordinate with the System-wide CMC and Systems contractor

Construction Engineer Resume Examples & Samples

Manage and oversee all trackwork construction throughout the alignment, including but not limited to
Procurement for all rail, clips, special turnouts, switches etc
Construction of all plinths, ballasted and direct fixation trackwork, throughout the alignment
All pre-shutdown and shutdown work at the International District Station
Ensure all testing and verification is completed as necessary

Construction Engineer Resume Examples & Samples

TPSS sites
Roadway Access
Staging and laydown areas
OCS Foundations
Utility relocation/lining
Sound walls
Roadway modifications
Pavement panel replacement
Station site grading and foundations
Bridge demolition
IDS
Barrier demo and replacement
Landscaping and hardscaping

Field Construction Engineer Resume Examples & Samples

General Platform Assistance- Respond to pipework failures and structural integrity issues and advise on available repair options and methods
Completion of Platform Repairs - Raise Work Orders, prepare site sketches, compile job packs, request onshore fabrications, order materials, carry out final punch where necessary and close out
MoC / Studies / Surveys- Liaise with onshore engineering, projects & operations groups to complete surveys, answer queries during work pack development, review construct-ability, support installation phase, raise and issue punch list on completion of piping and structural systems, produce Handover Certificate on job completion and return work pack onshore with relevant as-built drawing mark-ups
Platform TAR/Shutdowns – Preparation Justification Sheets for tasks to be included in the schedule, Compile TAR/Shutdown Job packs, order materials, Identify pre TAR/Shutdown Hot Bolting Requirements review process isolations, compile spading schedules and advise on planning, manpower and support services
Pressure Testing - Compile Test Packs, maintain the Offshore Test Register, witness hydrotests, prepare documentation, confirm reinstated as per drawings and to specification, handover final documentation to QA Engineer, manage records and certification for hydrotest equipment
Concessions - Raise concessions in accordance with the Concession Procedure and raise Work Orders for temporary and permanent repairs
Planning - Assist in prioritising construction tasks, preparation of man-hour estimates, provide feedback on the progress of ongoing work and produce detail plans for individual tasks if required
Vendor Coordination - Identify specialist vendor requirements and coordinate between platform departments and specialist vendors
Engineering / Design background with extensive experience working in the oil and gas industry
Minimum of an HNC in Mechanical Engineering
Proven track record of providing engineering design and construction services
Direct experience in the construction of offshore oil and gas production facilities and Brownfield Modifications
Experience in the preparation of work scopes / work orders and the ordering of materials
Proficient in the preparation of site design sketches
Must have thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications (ASME, API, ANSI, ASTM etc)
Be well versed and have good understanding in the use of piping specifications and be able to interpret vendor specifications where necessary
Experience in the review of engineering studies, design drawings, documents, and material & equipment specifications and datasheets
Being able to resolve specialty related engineering issues by applying accepted principles, codes, and standards
Competent in the preparation of activity planning
Good team and interpersonal skills
Must be flexible and able to adjust priorities according to operational demands
Experience with SAP business environment

Principal Construction Engineer Resume Examples & Samples

Project manage regional network construction of cell site projects including new build turn ups, cell expansions, reconfigurations, and system upgrades
Work closely with Real Estate, Equipment Engineers and Facilities Engineers to ensure cell site construction issues are cleared and requirements are met
Work with outside vendors including General Contractors and Architectural & Engineering firms on project design and priorities to meet VZW standards and build schedules
Host weekly routine planning and working sessions with critical stakeholders and regional Operations Managers to review project scope, define issues, develop deliverables and associated timelines, assign primes and track action items
Develop and maintain a detailed schedule for each project and actively manage the scheduled tasks with outside vendors including major milestones, action items, long lead purchases and any other commitments that would impact the project schedule
Analyze implication of changes from the original schedule and take required corrective actions to ensure the project stays on track
Provide regular project status reports to management and the project team
Coordinate and oversee the issuance of RFQs and the evaluation of responses, based on VZW purchasing requirements, and provide detailed analysis and recommendations for the best candidates
Review quotes and issues purchase orders using PeopleSoft Purchasing system. Manage receipts related to the purchase orders and ensure that invoices are paid in a timely manner according to federal and state regulations
Maintain the regional monthly cell capital plan ensuring spending accuracy in monthly forecasting and performing monthly true-ups of YTD monthly spending by budget item

Construction Engineer / Specialist, Senior Resume Examples & Samples

5 plus years of experience in field construction on projects of a similar nature with an emphasis on field installations, inspection, acceptance testing and commissioning of signal systems “like and kind” to the client systems in and around operating rail is required
Experience in the construction of large civil/structural and/or industrial projects at domestic and/or foreign locations is preferred
Requires a working knowledge of engineering and construction-related processes, as well as industry practices
Also requires excellent written and oral communication skills, a familiarity with CAD and other PC software packages typically associated with engineering and construction, and the potential for performing in a lead capacity on a project

Area Construction Engineer / Specialist Resume Examples & Samples

4-year degree in engineering or construction-related field, or equivalent construction-related work experience
8 plus years of experience in field construction on projects of a similar nature with an emphasis on field installations, inspection, acceptance testing and commissioning of signal systems “like and kind” to the client systems in and around operating rail is required
Experience with CBTC, ATS, Automatic Train Protection (ATP), Automatic Train Operation (ATO) and conventional signaling systems
Experience working directly with transit agencies or other railroad Force Account personnel a plus
Requires a comprehensive knowledge of engineering and construction-related processes, as well as industry practices

Principal Construction Engineer / Specialist Resume Examples & Samples

12 plus years of experience in field construction on projects of a similar nature with an emphasis on field installations, inspection, acceptance testing and commissioning of signal systems “like and kind” to the client systems in and around operating rail is required
Experience in the construction of large civil/structural and/or industrial projects at domestic and/or foreign locations is preferred, including some supervisory experience
Also requires excellent written and oral communication skills, a familiarity with CAD and other PC software packages typically associated with engineering and construction, and the proven ability for performing in a supervisory capacity on a project

Construction Engineer Resume Examples & Samples

Assist project staff in their duties
Work closely with Project engineers, construction engineers and superintendents
Ensure adherence to Parsons Safety policies
Prepare safety "toolbox meeting" and Activity Hazard Analysis
Ensure adherence to Parsons Quality Control and Quality Assurance programs
Report, track, and resolve non conformance issues in coordination with QA/QC
Execute work plans for the construction activities
Implement of basic layout, and field measurements
Track RFls
Track, and resolve punch list items
Prepare task completion reports
Prepare basic take offs
Coordinate subcontractors and suppliers
Demonstrated understanding of basic construction concepts
Bachelor's or associate degree in construction related field is preferred
0-5 years of demonstrated experience in the construction field
Position could be based out of any project location in the US. Hence MUST be willing to relocate to any project location. Relocation assistance will be provided
Knowledge of Windows Office Systems; particularly in Excel, Word and Outlook is preferred
Capable of reading plans and drawings
Willingness to learn the skills needed to grow within the construction industry. Ability to prepare clear and concise oral and written communications

Construction Engineer Resume Examples & Samples

Monitor HSSE aspects of construction activities. Recognise areas for improvement and communicate them to senior management to ensure continual improvement
Evaluate and consider HSSE and CDM (Construction, Design and Management) by the virtue of robust preparation, planning and execution of works
Conduct quality, health, safety and environmental inspections and audits to ensure compliance with the Works Information
Assist PM in administering the contract by working with other members of the team to write and respond to contractual communications
Supervise site activities
Review Risk Assessment Method Statements, Inspection & Test Plans, Construction Drawings and Procedures, monitor and ensure compliance on the Worksites
Review technical queries and liaise with the engineering teams to resolve technical issues
Attend regular progress meetings
Attend regular meetings with stakeholders and senior leadership team
Perform Witness Inspections with NEC Supervisor as designated in Inspection and Test Plans
Raise any observed non-conformances with the Main Works Contractor and/or Tideway Engineer / Project Manager
Perform schedule reviews to ensure work is delivered on-time
Monitor resources engaged on sites and provide written records
Maintain contemporaneous records and produce daily reports

Construction Engineer Resume Examples & Samples

Demonstrated skills in managing projects to bring in on budget, on schedule, and technically correct
Manage the Misterium construction for the USA and Canadian markets
Oversee and supervise architectural and mechanical aspects of the projects
Displays flexibility with assignments in different units
Maintain and monitor budget and expenses of assigned projects
Communicate effectively with the other disciplines in delivering projects
Represent Grifols during project execution meetings
Participates with Hospital Division Sales Representative during pre-sale meetings
Demonstrates high level of facilitation skills to reach consensus; works toward win-win solutions for business benefit
Makes decisions within defined areas of responsibility with minimal supervision
Provide guidance to the CAD designers for the various architectural designs
Review and recommend contracts as well as developing cost estimates
Supervises quality control and oversees the fulfillment of applicable building codes, FDA regulations, etc
75% of time will require to travel to multiple ongoing projects

Construction Engineer Resume Examples & Samples

Work with various groups within CSX (Public Projects, Maintenance of Way, Bridge & Tunnel, Communications & Signal, Environmental, Properties Services, etc.) and with other entities outside of CSX Transportation (General Engineering Consultants, State DOT's, etc.) to develop overall construction plan and in service plan for Infrastructure Projects
Provide construction management support to project work teams (CSX Maintenance of Way, CSX Signal Construction, Civil Engineering & Track Contractors, and others) to execute the construction of railroad infrastructure projects
Assist with the development of Project Estimates and manage the budgets to construct the Infrastructure Projects
Review and approve Invoices and Contractor Expenses associated with Infrastructure Projects
Prepare and present project status reports using Project Management Tools on a regular basis to monitor project construction status
Perform or Participate in Project Quality Assurance Reviews with internal and external work teams
Conduct weekly and monthly Safety Observations. Participate in CSX Design & Construction Quarterly Meetings and Safety Overlap Meetings
Miscellaneous activities and responsibilities as assigned by manager
Associates Degree/2-year Degree
3 or more years of experience in Construction of Infrastructure Projects (Civil & Track / Bridge & Tunnels)
5 or more years of experience in Construction of Infrastructure Projects (Civil & Track / Bridge & Tunnels)
Bachelor's Degree/4-year Degree
Knowledge of civil engineering including construction methods, surveying, design, estimating, and forecasting
Ability to create, read, and understand design drawings and specifications
Project management skills including scheduling software
Computer-aided design (CAD) skills such as AutoCAD and / or MicroStation
Knowledge of various computer systems i.e., ORACLE
Some knowledge of state, local, and federal laws/regulations pertaining to building standards
Basic Microsoft Office skills to include Word, Excel, Outlook

Construction Engineer Resume Examples & Samples

Provide engineering level support during new build process by performing initial site walks to determine needs and capabilities. Responsibilities include: verifying telecommunications facilities, power facilities, ground stability, construction access, and road improvement possibilities
Coordinate with Site Acquisition group to determine initial data needs as well as various structural and environmental issues
Coordinate with landowners, and various vendors to execute the construction process within budget projections
Point of contact for power and telecommunications vendors for all on site facilities design and installation
Review and provide feedback on construction drawings for each cell site utilizing AutoCAD and Visio software. (helpful)
Order and coordinate installation of equipment such as prefabricated buildings, towers, and microwave dishes
Maintain excellent vendor communication
Responsible for creating and sending out bid packages to various vendors
Responsible for bid awards to vendors based on several criteria such as expense, quality, and estimated completion time
Project manage by chairing pre-construction meetings for each site. During the pre-construction meeting establish schedules and estimated timelines for delivery of equipment
Ensure efficient use of budget by reviewing construction schedule and providing process improvement
Responsible to attend internal meetings and communicate project timelines and needs
Stay current with technology and implement when available to reduce budget expense and expand capabilities
Perform routine inspections of all sites during construction. Review and ensure that all environmental and safety procedures are followed
Coordinate installation and integration of equipment inside the building
Schedule generator start up and verify warranty documentation is in place at each location
Upon site completion, perform final walk through and address any outstanding issues
Coordinate transition of site from construction to operations for completion and turn up
An Associate’s degree or equivalent experience. Even better if you have your Bachelor’s degree
Demonstrated large-scale project management experience with two or more years of process/program management experience
Project Management Risk Assessment & Management Presentation Skills
Subcontractor, Supplier & Vendor Management Change Order Management
Contract Management Client Relations Budget Accountability Quality Field Service
Procurement and Logistics Negotiating Skills Strong Communications Skills
Process Management Scheduling Manufacturing

Area Construction Engineer / Specialist Resume Examples & Samples

Provide for and act as liaison with agency Signal Department Representatives for all matters involving signal installations, testing, and commissioning and inspection services as required
Preview all signal design and procurement documents to confirm conformance to plans and other design specifications as applicable
Review and comment on all Factory Acceptance Testing and Site Acceptance Testing
Monitor schedule of installations in accordance with baseline schedule and support update activities by Scheduler
Support the development of internal status reports and reports to oversight agencies on project status

Principal Construction Engineer Resume Examples & Samples

The Principal Construction Engineer manages project development from initial site design to in-service. Projects include cell sites, switch facilities, In Bound Collocations and In Building projects. Responsibilities including drawing review for compliance with civil, structural, mechanical, and electrical standards
Participate in the development of processes, procedures, and priorities surrounding critical POR (Plan of Reocrd) objectives. Recommend and implement resulting policies and procedures
Supervise construction inspection activities for capital projects; document construction activities; confer with contractors on construction progress; ensure compliance with applicable standards and regulations; provide resolutions to construction problems
Provides full financial management of all projects from initial proposal/bid through receipt of final product or service; funding projects; processing purchase orders; forecasting spend; reviewing work; and ensuring payment and final balance in purchasing software
Provides leadership and guidance by practicing Core Values including: creating and evaluating ways to gain financial efficiencies and save money; creating process improvements; securing assets; and being accountable for vendor payments
Communication with other cross functional teams and vendors
Provides the necessary direction for individual/team growth and development
Actively participate in meetings and show the ability to explain issues clearly, providing updates, maintaining records, working with other departments, and understanding the impact of their job to the overall business
Establishes quality assurance methods, procedures, standards, and technical training related to site design and construction
Bachelor’s degree in Engineering, Business, Computer Science or equivalent relavent work experience
A minimum of 5 years of experience as a Construction Engineer or Construction Manager
Needs to have a working knowledge of environmental and safety rules and regulations. Must be able to review of Phase I environmental reports, and wetland studies
Construction management skills including: CAD/design review, implementation, and project management
Must have strong experience with macro new build construction and related systems, HVAC, emergency generators, National Electrical Code requirements, environmental requirements including hazardous material, spill prevention, and other regulatory guidelines, general building maintenance, and vendor maintenance
Must have some experience with in building (DAS) and small cell systems
Real Estate: Must be able to negotiate leases and easements for communications facilities
Zoning and Permitting: Complete understanding of the zoning and permitting process for new cellular facilities
Microwave experience: Understand the technology for leasing, zoning, permitting, and implementation
Valid Driver's license in good standing required as position will require the use of a company vehicle
Supervise, direct, and coordinate the work of lower level staff
Interpret and explain policies and processes
Train and mentor team members
Negotiate and manage engineering services
Work with professional consultants, contractors, jursdictions, landlords, tenants, and sub contractors
Prepare clear and concise reports
Communicate clearly and concisely, both orally and in writing
Establish and maintain effective and positive working relationships with those contacted in the course of work

Construction Engineer Resume Examples & Samples

An Associate’s degree or two or more years of equivalent experience. Even better if you have your Bachelor’s degree
Project Management, Risk Assessment & Management, and Presentation Skills
Subcontractor, Supplier & Vendor Management, and Change Order Management
Contract Management, Client Relations, Budget Accountability, and Quality Field Service
Procurement and Logistics, Negotiating Skills, and Strong Communications Skills
Process Management, Scheduling, and Manufacturing

Construction Engineer Resume Examples & Samples

Manage site activities
Attend regular progress and meetings
Attend regular meetings with stakeholders/consultants and senior leadership team
Assist PM in administering the contract
Conduct quality audits and health, safety, and environmental inspections
Take reasonable care of your own and others for HSSE, by focusing on the potential outcomes of your actions
Maintaining contemporaneous records

Construction Engineer Resume Examples & Samples

Lead the world class approach to health, safety and welfare by constantly demonstrating best practice
Attend regular meetings with stakeholders/contractors/consultants and senior leadership team
Conduct quality audits / inspections working closely with NEC Supervisor; and health, safety and environmental inspections
Take reasonable care of your own and others for HSSE, by focusing on the potential outcomes of your actions taking zero compromise
Support construction planning
Experience of managing contractors
Experience of working with Stakeholders
Understanding or prior experience with administering contracts (desirable)
Experience of working with live sewage systems (Desirable)
Experience of working on the construction phase of heavy civils projects (Desirable)
Project Management skills (Desirable)
Experience of working under planning consent

Construction Engineer, Means & Methods Resume Examples & Samples

Have a thorough understanding of the safety requirements for construction, specifically for Civil Works
Complete a Project Schedule if required. Supervise the completion of a Project Schedule by others
Draw up definitions and detailed specifications of tasks and sub-tasks or supervise their drafting by other resources if requested
Develop Work Plans (Work Methods) as required or supervise the development of Work Plans for a given item of work on the project
Perform all the necessary engineering verifications and calculations necessary for the methodology to be implemented
Summarize and clarify in a manual all methodology activities, clearly identifying the show stoppers (if any). Transfer inside the manual all useful data derived by analyses performed by others
Ensure that the operational people on site receive all useful data in form of work plans, manuals and drawings
Complete Lift Plans for Cranes or supervise the development of lift plans by others
Define the materials or services to be purchased for construction tasks within the allocated resource budget, in conjunction with the Project Engineer
Develop Scope documents for subcontractors and suppliers or supervise the development of Scope documents by others
Participate in meetings to examine and, if necessary, audit the technical design, and take part in technical examinations with the Client
Complete on-site inspections of Temporary and Permanent Works or supervise others during these inspections
Have a basic understanding of Project Costs
Complete Cost Coding of Time Cards or supervise others completing this task
Have a thorough understanding of construction productivity and how they are affected by engineering and planning
You have at least 10 years of experience
Proven experience on Design-Build, P3 projects
You know the principles of processes and equipment used to construct overpasses and preferably complex bridges
You can use Office tools (Word, Excel, Primavera and Access) and AUTOCAD (or any other plan creation software)

Bridge Construction Engineer Resume Examples & Samples

Have a thorough understanding of the safety requirements for construction, specifically for the construction of bridges
Able to work safely at heights
Complete a Project Schedule if required and supervise the completion of a Project Schedule by others
Develop definitions and detailed specifications of tasks and sub-tasks or supervise their drafting by other resources if requested
Develop Work Plans (Work Methods) as required or supervise the development of Work Plans for a given item of work on a bridge project
Supervise and verify the drafting describing the methodology to be implemented
Summarize and clarify in a manual all methodology activities, clearly identifying the “show stoppers (if any). Transfer inside the manual all useful data derived by analyses performed by others
Ensure that the operational people on site receive all useful data in the form of work plans, manuals, drawings
Identify technical problems and make the necessary technical decisions
Complete formwork design as required or supervise the development of formwork design
Assist in the technical design necessary for the purchase and/or construction of temporary works
Participate in meetings to examine and, if necessary, audit the technical design, and take part in technical examinations with the Client. Complete on-site inspections of Temporary and Permanent Works or supervise others during these inspections
Have a basic understanding of Project Costs and design standards
Have a thorough understanding of productivity and how they are affected by engineering and planning
Develops partnerships with other teams, groups and business units, including external partners and ensures others do the same
Nurtures key internal and external contacts/networks
Deals sensitively with all forms of diversity
Works collaboratively and shares information with other departments, and ensures others do the same

Construction Engineer Resume Examples & Samples

Provide technical leadership and knowledge of state-of-the-art construction techniques, project management, and contract administration
Monitor construction activities to ensure design, specifications, and contracts are followed and that work is done according to schedule and within budget
Be present at the work area and monitor “critical activities” when being performed. Critical activities include but are not limited to; excavation, lifts, core drilling, system activation and switching, system testing and commissioning. Critical activities will be discussed and defined by the Resident Construction Manager regularly
Provide inspection of all work in place; review and approve construction check-off lists to ensure that work performed is in accordance with the contract specifications and applicable codes
Inspect in-progress, construction work to ensure compliance with the contract documents, specifications, permits, and drawings
Display and understand knowledge of industry-wide practices and safety regulations
Demonstrate ability to view tasks logically, break them down into essential requirements, and generate a solution to meet the project goals
Investigate what is not intuitive, anticipate problems and field construction constraints, and make recommendations as to the best course of action
Handle smaller projects from start to finish, with only major decisions being brought to the Manager
Display and demonstrate strong project management and organizational skills
Work independently and with minimal daily supervision; Ability to identify and solve problems
Supervise the activities of site field office personnel to verify contractor performance to comply with contract and design specifications
Act as liaison between Headquarters and on-site staff as a construction expert when requested by the Resident Construction Manager
Provide technical guidance in on-site O&M and start-up activities when necessary
Assist the Resident Construction Manager with the management of field changes with AWR/Change Order and engineering procedures
Review construction drawings, specifications, and related documents for constructability, milestone schedules, and deliverables of major equipment
Ensure work is carried out in accordance with technical requirements and schedules; designs and specifications are reviewed so that they meet the Authority’s technical requirements; all deliverables adhere to the acceptance standards
2-5 Years of experience managing capital construction projects
Core knowledge of construction techniques, construction management, and basic contract administration
Knowledge of Primavera
Good negotiation skills with clients, contractors, and vendors
Proven working experience in project management in the construction sector
Electric Utility or energy industry experiences a plus
Self-motivated and well-organized with a positive attitude towards challenges and the ability to set and meet deadlines
Enthusiasm to participate or lead in a team based culture across multiple NY geographies to meet challenging deadlines in a fast paced environment

Construction Engineer Resume Examples & Samples

Assist the Construction Manager with all facets of project execution
While not otherwise involved in project-specific work, support other project and proposal efforts, including estimating, procurement and project controls, and coordinating, expediting, and tracking construction submittals
Read, clearly understand and interpret construction drawings
Strong people skills, ability to interact with the design team
2+ years of construction experience and some college or technical school training is preferred
Previous experience or internships in the field is highly desired
Knowledge of estimating and CAD software programs (Timberline ), scheduling software (Primavera P3 or SureTrak ), and project management software (Prolog )

Construction Engineer Resume Examples & Samples

Perform complex construction assignments exercising judgment in evaluation, selection and modification of standard construction engineering techniques and procedures
Conduct project field coordination, documentation, cost monitoring, bidding and scheduling
Receive, issue and track RFIs, submittals and other required data
LI-BC1
5+ years of construction engineering or inspection experience on DOT projects projects. Nebraska and Iowa DOT experience is highly preferred

Construction Engineer Resume Examples & Samples

Will require supervisory skills and will oversee Contract and Company construction crews and supervise projects
Design electric and/or natural gas facilities, performing computer related functions such as engineering analysis, drawing, spreadsheets, and database compilations and programming
Respond to customers' needs by performing field investigations
Survey and inspect routes
Responsible to take effective steps to ensure that cost estimates meet company standards and pricing costs
Each Engineer is on the Division call schedule. This is a 24-hour a day duty, periodically, for one week at a time. The call responsibility includes response to emergency situations and calling personnel out for after hour activities and require that the individual reside in the area
Assist in budget presentation
Job time is spent in office and field environment with exposure to all field hazards and weather
Occasional lifting of materials up to 70 pounds required
Some travel and extended hours may be required
Promote and maintain community involvement and company image in a manner supported by the company
Applicant must demonstrate a history of good safe working practices and must demonstrate a good safety record
Must have a BS degree in Engineering, a construction/project management degree, or equivalent experience
Ability to obtain a Professional Engineer's License is preferred
Excellent communications and computer skills and good to excellent technical writing skills required
Experience with SAP, line design or LDPro desired
Have the ability to handle multiple conflicting tasks or projects and challenging situations
Must be organized and have the ability to work well with others
Knowledge of International Fuel Gas Code, NESC, NEC, and the DOT. Part 191 and 192 is preferred
This position requires a general understanding of survey and inspection techniques and microprocessor-based equipment
A valid driver's license or the ability to get one is required

Construction Engineer Resume Examples & Samples

Handle calls and correspondence from Construction and Maintenance foremen, general foremen, civic inspectors, the sales department, and other Company departments regarding the status of jobs and projects
Handle calls and correspondence from outside the company (municipalities, engineering firms, developers) to process the needed information to coordinate the Company’s facilities with proposed improvements and development
Schedule and prioritize projects that are going to construction or have a higher priority due to the Company’s requirements
Prepare necessary paperwork related to the Company’s procedures for gas main and service work as required, including utility agreements and other documents
Completes engineering designs and cost estimates using GIS for all types of main and service work
Complete engineering specifications and designs for new pipe installations, regulator stations, code compliance, improvements, construction/gas conditioning equipment and instrumentation, and retirements of pipeline systems for natural gas and propane pipelines
Attend utility meetings and pre-construction meetings to negotiate with representatives from engineering firms and municipalities to reduce the impact of proposed improvements to the Company’s existing facilities
Attend site meetings, when necessary, to resolve specific issues or conflicts with the Company’s facilities and proposed improvements
Assist in the daily coordination, assignment of work and oversight of the GIS Analysts and Construction Engineer I
Assign the various plans for review to the GIS Analyst and follow their progress through the construction drawing process, providing information or direction when needed
Record and track each set of improvement plans from preliminary to final stage through construction
Assign survey and test hole work to GIS Analyst
Ability to lead by example in support of the Company’s essential characteristics and values: strong ethics and integrity, dedication to a safe work environment, commitment to a diverse workforce that recognizes and respects every individual’s unique skills and perspectives
Ability to adapt in a fast-moving and changing culture
Ability to work independently and manage time effectively in order to meet individual goals and deadlines
Bachelor’s degree in Engineering(Civil, Chemical or Mechanical preferred)
Three years of related engineering experience
Two years of practical design experience and interaction with road/highway agencies

Construction Engineer Resume Examples & Samples

Provide Input and guidance for lift planning work(selection of appropriate crane, check on clearance etc.) across the site
Inspection of crane prior to mobilization
Perform field audits to ascertain compliance to practices and safe lifting practices
Review and approval of critical lift plans and physically verify crane set up prior to first critical lift on site
Conduct Lifting Management System training and assess competency of contractor crane operators and lifting crew
Partake in incident investigations
Assessment Lifting Management System candidates for course enrolment where prerequisites have not been met

Construction Engineer / Specialist Resume Examples & Samples

4-year degree in engineering or construction-related field, or equivalent construction-related work experience, as well as 3 to 5 years of experience in field construction is required
Also requires good written and oral communication skills, and a familiarity with Excel and other PC software packages typically associated with engineering and construction
Familiar with Civil and Electrical Engineering Drawings
3+ years General Construction Experience

Principal Construction Engineer / Specialist Resume Examples & Samples

Support schedule development and coordination of work activities with agency operations and other Force Account and 3rd party functions
Review 3rd party contractors submittal schedule to confirm submissions are consistent with schedule requirements, are being prioritized in accordance with procurement “lead” times, and allow sufficient time for review by the client
Monitor installations and confirm materials and installations have been installed per plans and specifications
Assist in the reconciliation in a timely manner of Request for Information submissions by the 3rd party contractors and others
Assist in the testing, commissioning and acceptance of the equipment by the client through activation for revenue service or as otherwise directed by the client

Construction Engineer Resume Examples & Samples

Construction management and CE&I
Supervise entry-level engineers, CE&I staff and designers
Roadway/greenway design
Pavement management
10+ years of relevant professional experience including, extensive CE&I experience with NCDOT
Resident/Assistant Resident Engineer/Construction Engineering experience at NCDOT or other DOTs

Site Construction Engineer Resume Examples & Samples

Supervising the construction of signaling buildings between Beni-Suef and Asyut as part of the modernization of signaling system on Cairo-High Dam corridor and monitoring their progress along the project execution phase,
Responsible for budgeting, organization, implementation and scheduling of the projects,
Coordination and interfaces management with providers of signaling and telecom solutions, building designers (outsourcing) and civil contractors, PS&D (power supply and distribution) designers and MEP contractors
Supervise the buildings’ construction from conception to completion on daily basis,
Provide technical advices to subcontractors regarding construction activities,
Monitor on-site constructions to monitor compliance with building drawing , specifications, local and safety regulations,
Monitor and follow the construction workers and subcontractors,
Prepare daily progress report and sending it to Construction Manager,
Reporting any delay that might affect the execution schedule,
Ensure quality construction standards and the use of proper construction techniques,
Report any Quality or EHS violations or concerns to the Quality & EHS inspectors on site,
Follow the coordination drawings and arrange with other subsystems in all overlapping activities,
Monitoring and tracking of any VO quantities and reporting it to the Construction Manager
Analytical
1-2 years of proven working experience in construction supervision
Site Construction and arrangement Works
Site Survey (Topography - GPS coordinates)
Quantity Survey
Language Skills: Excellent command of Arabic and English (written/ spoken). French is an advantage
Ability to work under pressure and Supervise multiple sites in parallel
Self-motivated, willing to learn new fields, and hard worker
IT Skills: Excellent command of AutoCAD and Microsoft office package
Location for the role? Travel? Upper Egypt resident (Minia governorate preferred)

Capital Construction Engineer Resume Examples & Samples

Professional Engineer or Professional Architect registration in the State of Maryland or in a state with comparable requirements may be substituted for the education requirement
Candidates may substitute U.S. Armed Forces military service experience as a commissioned officer in Civil Engineer Corps or Engineering Aid classifications or Construction Engineering Technician, Technical Engineer, or Civil or Combat Engineering specialty codes in the Engineering field of work on a year-for-year basis for the required experience and education
Employees in this classification may be assigned duties which require the operation of a motor vehicle. Employees assigned such duties will be required to possess a motor vehicle operator’s license valid in the State of Maryland

Construction Engineer Resume Examples & Samples

Design and develop trend charts and tracking tools
Report, analyze and improve productivity trends
Supervise QC technicians during rebar inspections, concrete testing and similar activities
Interpret designs and drawings for crafts during the construction phases
Create and track RFls
Initiate field design change requisitions
Develop, track, and resolve punch list items
Schedule and supervise punch list activities
Prepare task/project completion report
Prepare basic take offs and pricing
Schedule, coordinate, review and supervise subcontractor scope of work
Schedule and coordinate concrete pours and other deliveries
Participate in change orders request preparation and resolution
Prepare basic design packages for temporary structures such as formwork, false work, support of excavation, etc
Bachelor's degree in Civil Engineering, Construction Management or similar field from an Accredited Institution
0-5 years of demonstrated self-performing experience in the construction field, on large, complex, heavy civil transportation projects (Road & Highways, Bridge & Tunnel or Rail & Transit)
Working knowledge of CAD programs
Working knowledge of basic survey and layouts

Construction Engineer Stf Resume Examples & Samples

Demonstrated proficiency in full life cycle requirements for construction engineering and management projects for domestic and international projects
Proficient in estimating, costing, procurement, construction, and scheduling activities
Highly proficient in MS Word, Excel and PowerPoint
Advanced proficiency in MS Excel worksheet/workbook development and data manipulation
Proficient in estimating software applications, including RS Means
A valid passport will be required
Previous experience in implementing new and emergent technologies
Commercial and Industrial experience
Demonstrated written and verbal technical communication skills

Construction Engineer Resume Examples & Samples

Gives substantial technical support to his/her supervision team to facilitate work execution
Ensures proper preparation before any new construction activity begins and reports any deficiencies or impediments to his/her Manager
Draws-up the extra works orders and pay particular attention to supervising activities deriving from
Ensures construction work proceeds in conformity with schedule, quality and HSE. Prepares reports accordingly
Establishes work assignment to discipline supervisors
Interfaces with field engineering for clarification regarding design / drawings

Construction Engineer Resume Examples & Samples

Minimum of 1 year of experience work in transit construction
Minimum of 5 years of experience in design/construction,
Prefer rail/transit and/or transportation experience

Construction Engineer Resume Examples & Samples

Before Project Starts
Completes takeoffs for bids
Works with Estimator in charge to transfer successful bids to accounting software
Prepares project submittals, including list of materials, materials specifications, submittals, list of subcontractors, etc
Assists accounting staff as necessary to prepare subcontracts, requests for insurance certifications, etc
Secures necessary project permits including SWPP, dewatering, reclamation, excavation, tapping, etc
Prepares list of internal materials including quantities and prices, and reviews with material sales personnel
During the Project
Reviews timecards daily for coding accuracy and submits them to the office for processing
Collects and files Daily Project Diaries that Superintendents submit every morning with timecards
Collects daily progress quantities and inputs into accounting system
Maintains Project files in construction offices, including correspondence with the owner, engineer and subcontractors. Assists Project Manager with preparation of letters, meeting agendas, etc. as necessary
Matches project invoices for project materials and for all project purchase orders. Submits coded invoices to Project manager for approval
Assists Project Manager with daily posting of project quantities and the weekly project cost projections
Prepares details for entry of project change orders, both reimbursable and non-reimbursable, into Viewpoint accounting system
Assists Project Manager with preparing all relevant information for accounting department to post monthly billings for all projects assigned
Prepares all relevant information for accounting department to process all monthly subcontractor payments on assigned jobs
Facilitates measuring quantities with subcontractor as required for an agreement prior to payment
After Project Completion
Prepares all files for project documentation and storage
Assists Project Manager with submitting project closeout documents and information to owner
Reviews with Project Manager the final pay quantities and final payment contract value as necessary in Viewpoint
Periodically visits field projects to gauge progress on activities and to answer Superintendent questions on cost reports
Operates surveying equipment and performs surveying functions as necessary
Bachelor’s degree in Civil Engineering, Construction Management or other related field is preferred, or an equivalent of education and experience will be accepted
Valid driver’s license is required
Ability to read and comprehend detailed and involved instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization
Ability to add, subtract, multiple and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ration, and percent
To perform this job successfully, an individual should be able to type and use keyboards accurately and have knowledge of Database software. Previous use of estimating software is preferred

Scap Manager / Construction Engineer Resume Examples & Samples

Serve as Government Services (GS) Subject Matter Expert on the quantity surveying and scheduling of all design, construction, or assessment initiatives
Participate with technical and professional staff to determine construction proposal specifics in response to existing and potential Customer Requests for Proposals (RFP)
Maintain access to data, develop Rough Order of Magnitude (ROM) estimates for proposed engineering, construction, and facility maintenance projects and modifications
Develops a database of the details associated with facilities construction and maintenance projects that can be related to and tailored to varying RFP and SOW requirements
Maintain and develop cost models for each concept using company construction historical and estimated costs; includes building the Bill of Materials (BOM)
Apply standard practices and techniques in specific engineering assignments, use engineering/project scheduling and other project management tools
Assist and facilitate in Online Collaborative Planning and Project Management System from development to setup, distributes, administers and archives all engineering design, bid documents and project construction related correspondence, estimates, coordination actions and schedules
Develop or provide easy access to cost estimating and scheduling forms and details of current and anticipated project work within a computerized costing and project management system
Perform complete project material quantity take-offs and assists in preparing accurate cost estimating for civil and structural projects from design drawings and specifications that include the installation of real property, installed equipment and support systems
Work under the direction of the Project Manager/OPCON Site Managers and works directly with DI proposal staff, customers, consultants, contractors, and vendors
Leads a team of professionals to assess existing site facilities components (SCAPSE) including but not limited to: foundations, superstructures, roofing, plumbing, interior construction, finishes, HVAC, electrical, fire protection, and equipment associated with such components
Thorough knowledge of construction, engineering, facility maintenance, and construction management practices, standards, and FARs as they apply to scheduling and costing of large construction projects
Strong background in quantity take-off estimating is required
Excellent written, verbal communication skills
Strong mathematical and problem solving skills to evaluate cost relations and trends
Expertise in PC, MS Office, MS Project, Primavera, Prolog, and estimating and costing software
Working knowledge of DoD Unified Facilities Criteria (UFC); knowledge of the Whole Building Design Guide (WBDG) desired
Knowledge of detailed Site Condition Assessment Program (SCAP) is highly desirable
Bachelor’s Degree in Civil Engineering or Construction Management (or in a related equivalent discipline) from an accredited institution recognized by the US Council for Higher Education
Master’s Degree in a related field and Professional Certification are preferred
Five (5) or more years of related work experience in construction cost estimating, material quantity take-off and scheduling
Must have a wide-ranging engineering and construction background
Previous experience with medium to large civil projects required
Work experience on US Government and Military domestic and international projects is preferred; experience with business development activities is desirable

Construction Engineer Resume Examples & Samples

2 years experience in the construction industry
3 years experience in the construction industry
Bachelor’s degree in Civil or Environmental Engineering
Experience in the Heavy Civil Construction Industry
Previous Levee and/or Dam construction experience or environmental monitoring background

Construction Engineer Resume Examples & Samples

Support the construction surveillance of nuclear and non-nuclear civil works carried out by contractors on the ITER project
Support the TB Project Manager for the delivery of the tender batch (TB) managerial aspects
Support the technical delivery of the project for the civil works aspects including some site surveillance activities
Attend construction meetings and working meetings for the development of civil works aspects for the ITER project
Bachelors in Civil /structural/construction Engineering or equivalent relevant work experience
Experience of major project construction management/surveillance
Nuclear civil works experience is beneficial
Advanced French and English language skills

Offshore Wind Construction Engineer Resume Examples & Samples

Bachelor's degree in mechanical, electrical or civil engineering
A minimum of eight (8) years' experience with an energy developer, utility, oil & gas or related field performing a Project / Construction Engineering role or similar in an offshore environment
Have excellent communication skills and the ability to liaise at all levels
Possess strong quantitative and analytical skills
Be ambitious, motivated and have the drive to succeed
Fluent Mandarin (written and spoken)
Fluent English (written and spoken)

Assistant State Construction Engineer Resume Examples & Samples

At least four years as a Project Engineer OR two years as an Assistant Project Engineer AND two years as a Project Engineer
Professional Engineer License (civil engineering) in Washington State
Project Engineer experience administering construction projects
Prior working knowledge of contract administration with WSDOT Specification and standards; AASHTO/ASTM Standards; Construction practices and methods; State and federal contracting laws; Construction Materials and Legislative process

Construction Engineer, Thames Tideway Tunnel Resume Examples & Samples

Manages other teams to track actions and deliver to schedule
Competent in participating in meetings
Comfortable working with senior leaders
Degree in Engineering / Construction discipline or similar, or significant field experience

Construction Engineer Stf Resume Examples & Samples

Bachelor of science degree in engineering, construction management or similar discipline, or equivalent years of experience
10 years of project management experience in commercial construction and renovation project management
Diversity of project experience including small and large projects
Ability to read and execute engineering drawings and specifications
Experience in managing contract performance of designers and contractors/subcontractors
Proficient in MS Office software programs including PowerPoint, Excel, Word, Outlook, and Project
Demonstrated ability to manage multiple projects at once
Track record of successful project budget control
Basic understanding of laboratory, factory/manufacturing/assembly, and office space requirements
Proven construction skills which includes managing and negotiating with general contractors and/or subcontractors
Proficient knowledge and experience in the use of project management concepts to include: project schedule, scope, cost, risk and deliverables
Proven excellent verbal and written communications skills and including the ability to work effectively with customers, staff, management and diverse populations
Demonstrated performance in a team environment showing a respect for others
Knowledge of all applicable codes and regulations, including OSHA, ADA, state and municipal codes and regulations
Execute projects to meet or exceed customer need dates
Understanding equipment commissioning
Extensive experience using MicroStation cad and RS Means software

Senior / Lead Construction Engineer Resume Examples & Samples

BSc University degree in Mechanical Engineering
Minimum 15 years of industrial experience in oil and gas related projects
With experience working on multi-million projects

Construction Engineer Resume Examples & Samples

Provide engineering support for gas and electric growth, expansion projects, extensions, rebuilds, relocations, and assists with operating electric and natural gas utilities
Design electric and/or natural gas facilities following the Capital Business Processes
Supervise projects and oversee contract and company construction crews
Perform computer related functions such as engineering analysis, drawing, spreadsheets, and database compilations
Ensure that cost estimates meet company standards and current tariffs
Assist to develop project-specific capital budgets
Complete on-call after-hours duties, periodically, for one week at a time; this requires the individual to reside in the greater metro area; includes response to emergency situations and calling personnel out for after-hours activities
Must have a B.S. degree in Engineering
Working knowledge and experience in construction and design preferred
Experience with SAP, line design and LDPro preferred
General understanding of survey and inspection techniques and microprocessor-based equipment preferred

Horizontal Construction Engineer Resume Examples & Samples

Operation of different types of construction and rough terrain equipment
Maintenance and repair of equipment
Identification of soil types and placement of grade stakes
Interest in operating heavy construction equipment
Preference for working outdoors
Interest in working with your hands
Time Customer Service, Inc

Construction Engineer Resume Examples & Samples

Coordinating and scheduling design documents from the design engineer
Reviewing the budget and assisting Project Controls in preparing definitive estimates on change notices and in issuing a monthly cost status report
Preparing and administering requests for information, non-conformance reports, and field instructions
This position will require travel and be located at a project location undetermined at this time
Associates or Bachelor’s degree in Construction Management, Engineering or related discipline
Strong computer skills, experience with Microsoft Project is a plus

Construction Engineer Resume Examples & Samples

Detailed technical knowledge in construction aspects of all engineering disciplines
Ability to communicate effectively with groups outside of Construction Field Engineering and the company
Working knowledge of turnover department software

Construction Engineer Resume Examples & Samples

Must be a graduate of BSc in Mechanical Engineering
Minimum Industrial experience: 12 years
Experience in similar position: 5 years
Strong supervisory skills

Construction Engineer Resume Examples & Samples

Provide safety leadership to construction supervisors and engineers as well as the EPC Contractor employees. Ensure all Company HSE requirements are implemented and adhered to
Participate in regular safety walks and toolbox talks for specific area of responsibility
Coordinate with Construction Managers / Superintendents and EPC Contractors for interface management
Coordinate with site stakeholders to facilitate execution in a designated area and specific scope of work
Monitor EPC contractor’s method statements and construction plans, equipment and labor resources to enable efficient progress of the work scope
Provide effective and practical construction input to constructability reviews
Develop close working relationships with all assigned construction team members and EPC Contractor’s supervisors. Proactively work with all parties to enable project safety, quality and schedule objectives are achieved
Assist in the site engineering process so the EPC Contractors get adequate and accurate resolutions to site queries
Monitor and report on EPC Contractor’s QA/QC testing and compliance
Monitor EPC Contractor’s construction activities and schedules and identify areas of concern, mitigation and / or opportunities
Monitor the look ahead work plans to conformance with the overall schedules
Provide leadership for the weekly EPC coordination meeting for area of responsibility
To assist project management team by reporting on EPC Contractor’s activities which may have an effect on any delays, abortive work or potential claims
Become fully versed with the Electrical construction drawings and specifications
Should be familiar with the installation, testing & Pre Commissioning of both High voltage Equipment/Switchgear at transmission levels of 275KV / 132KV / 33 KV / 11KV / 6KV & 480V Low Voltage
Leadership and Team Building Skills

Graduate Construction Engineer Resume Examples & Samples

Distributing and filing design documents, specifications, procedures, instructions, and supplier information
Preparing requisitions for materials and services to be purchased in the field
Assisting other project departments in planning, scheduling, and controlling the project in accordance with overall project objectives
Reviewing design documents for completeness, Constructability, maintainability, and operability
Coordinating with the client representative to ensure compliance with job requirements and specifications
Assisting construction supervision in the coordination of contractors
Organizing and coordinating turnover, commissioning, and start-up operations, and ensuring that these functions are performed as required on the project
Obtaining as-built information and preparing as-built drawings
0 - 3 years experience
Strong computer skills, experience with construction and/or engineering automation software is a plus
Personal commitment to safety
Ability to travel or relocate for career development

Senior Construction Engineer Resume Examples & Samples

Material Testing & Laboratory Alignment: Confirm that materials testing and laboratory alignment which will involve scheduling, participating in, and evaluating alignment activities
Assure compliance with the Contract Documents and the Developer’s Construction Quality Management Plan
Oversee, including subcontractors/sub-consultants who will perform owner verification (OV) or QA Testing: Oversee scheduling and performance of owner verification materials sampling and testing . The materials manager will be responsible for determining OV target test frequencies, determining test needs and scheduling testing resources. Provide organization and summation of test results to comply with State and Federal reporting requirements
Provide in-house expertise and advice on testing and inspection
Perform Various Other Materials Management Activities: Along with the items specifically discussed above, the materials management organization will also: evaluate non-conformance events related to materials; review mix designs and other materials submittals; coordinate with the labs as appropriate to facilitate OV materials testing conducted by those entities; and prepare the OV Materials Management portion of the FHWA Quarterly Reports. *LI-JF1
At least 10 years related experience in various aspects of construction including materials testing, laboratory and field engineering,
Transportation experience is preferred
Strong interpersonal skills and ability to interact with staff, clients and Developer
Bachelor's degree in Engineering, Construction Management, or closely related field
Experience developing and managing construction engineering and inspection programs
Familiarity with State and FHWA requirements for materials acceptance

Construction Engineer Resume Examples & Samples

3-5 years’ experience in mission critical facility design, construction, project management, or operations with a knowledge and understanding of
Mechanical, electrical structural, and civil engineering construction principles or process
Telecommunications facilities design and construction plans
Emergency generators (750+kW)
National Electrical Code requirements and other regulatory guidelines
DC Power :GE Lineage, Tyco, Emerson, Marconi, Lorain
AC Switch gear: Square D, Cutler Hammer, Russ Electric, ASCO, GE
Working knowledge of MSC, CDMA and LTE, equipment

Construction Engineer Resume Examples & Samples

A 4-year engineering degree (Architecture, Department of Civil Engineering, Department of Architectural Electrical Engineering, Department of Building Facilities)
2 Years Factory or Industrial (Hi-tech) Construction Experience
5 Years of Construction Project Experience
Advanced knowledge of construction engineering technology codes, standards, etc., plus an in-depth understanding of the interdependence and relationship between other functional units
Excellent communication and interpersonal skills plus demonstrated ability to manage a team of varied disciplines
Registration as a Professional Engineer is valuable
Highly effective communication skills, both written and verbal, are necessary for effective communication with architects, engineers and contractors. These skills are also required to provide accurate project documentation

Senior Construction Engineer Resume Examples & Samples

Bachelor’s degree in applicable discipline
A minimum of 10 to 15 years’ on-site experience on transportation or other related projects
Experience with the administrative, contractual, inspection, business aspects of the construction process within the transportation market
Work experience required with VDOT, work experience with other state DOT’s will be considered
Experience with owner and contractor interactions
Must be able to use of Microsoft Office, Primavera scheduling software, and ClaimDigger software
Must possess the physical ability to move around an active construction site
Valid driver’s license with no major infractions

Construction Engineer Resume Examples & Samples

Oversee and maintain construction estimating processes, including analysis and updates to CU’s
Handle calls and correspondence from Construction and Leak & Maintenance foremen, general foremen, civic inspectors, External Affairs, and other departments regarding the status of jobs and projects
Handle calls and correspondence from outside the Company (municipalities, engineering firms, developers) to process the needed information to coordinate the Company’s facilities with proposed improvements and development
Process the all proposed road improvements, including identifying conflicts, designing relocations, obtaining variances, initiating work orders, and seeking reimbursement
Assign the various plans for review to the GIS Analyst and follow their progress through the construction drawing process, providing information or direction when needed, as required to properly convey and depict design decisions
Assist in the daily coordination, assignment of work and oversight of GIS Analyst and Construction Engineers
Work on special projects: bridge crossings; railroad crossings; design non-normal services, such as for loft buildings; work with those blasting near the Company’s mains; and calculate stress on pipelines with non-typical amounts of cover
Responsible for specifying and having placed on order most non-stock material required for all types of main and service work
Review the design and cost estimates for all types of main and service work; review delivery pressures; and justify proposed main work
Determine main financing costs for new business main extensions and report results to Marketing Department
Determine any non-normal costs that may occur with a main extension
Develop the detailed specifications, designs, and project plans for all components of natural gas distribution, including regulator stations, take points, transmission and liquid propane systems consistent with applicable codes and regulations
Bachelor’s degree in Engineering (Civil, Chemical, Mechanical Engineering preferred)
Five years of related engineering experience
Two to Three years of practical design experience and interaction with road/highway agencies

Construction Engineer / Manager Resume Examples & Samples

Provides services for and managing staff to carry out construction management/inspection services on bridges, roadways, transit and other transportation and intermodal facilities
Prepares, maintains and secures contract records including correspondence, contractor documents, meeting minutes, daily inspection reports, specifications, non-compliance notices, etc
Reviews and modifies drawings, specifications, installation sequences, and progress reports and initiates corrective measures if necessary
Reviews construction procedures submitted by contractors to assure conformance with overall project plan
Acts as technical liaison between contractor and design engineering personnel
May oversee the work of lower-level construction engineers who assist on projects
Observation and documentation of construction activities and safety procedures performed by others
Verification of compliance with construction bid and design documents
Preparation of daily, weekly and/or monthly reports
Submittal coordination and review of materials of construction, equipment, schedules, installation means and methods and operation and maintenance requirements
Review and coordination of requests for information
Meeting attendance and participation
Resolves field construction issues and provide recommendations
Coordination with multiple parties, organizations, and stakeholders including engineers, contractors, subcontractors, and clients
Development and review of work plans, design documents, change orders, engineering drawings
Cost estimating and contractor pay request reviews
Provide Quality Assurance reviews on construction projects to ensure objectives and assignments are conducted in conformance to contract documents
Prepare and/or approve Quality Assurance Reports on field operations which may include findings and recommendations for corrective actions
4 year degree in civil engineering or construction management or closely related field or NICET lll or lV certification is required
Minimum 6 years of related experience on highway or bridge projects required
Previous PennDOT, PTC, DRPA, SEPTA, DRJTBC, and Local Government (FAM) experience is preferred
Professional Engineer preferred
Certifications in ACI, PennDOT concrete, NECEPT bituminous, NICET lll or lV and CCM are preferred
ECMS, CDS NeXtGen or CDS-V3
Must possess strong computer literacy skills, i.e., Microsoft Office, etc
Qualified applicants will be an excellent communicator and possess strong verbal and written communications skills as well as practical construction management capabilities

Construction Engineer Resume Examples & Samples

BS in Civil Engineering or related discipline, required
0-1 year of experience; previous construction internship experience is a plus
Solution based problem solver
Ability to work with and grow in a team environment
Proficient with MS Office Suite, specifically Word, Excel and PowerPoint

Lead Construction Engineer Resume Examples & Samples

Manage large sized construction projects and lead a team
Supervise management of heavy lifting equipment and large earth moving activities
Demonstrate experience working in the oil and gas industry
Possess soil remediation experience
BSc Engineering degree with 10 years of total experience
Minimum of 5 years work experience in oil and gas / refinery / petrochemical industries with 5 years in related designation
Excellent leadership and teambuilding skills
Good HSE awareness and commitment

Lead Construction Engineer Resume Examples & Samples

Minimum 12 years’ post-graduation experience
Minimum 8 years’ experience in oil and gas, refining and petrochemical industries
Minimum three years’ of experience with reputed Consultants in the same / similar position is desirable
Ability to achieve mechanical completion and have a basic understanding of Process Engineering

Construction Engineer Resume Examples & Samples

Minimum 10 years’ post-graduation experience
Minimum 4 years’ experience in oil and gas, refining, LNG and petrochemical industries
Prior PMC experience is an asset
Prior Middle East experience is an asset

State Pavement Construction Engineer Resume Examples & Samples

Experience in administration of Highway Construction Contracts containing asphalt or concrete pavement construction
Experience in development or review of cost proposals for pavement construction
Experience in review and investigation of pavement distresses
Demonstrated ability to develop and conduct technical training related to Construction or Contract Administration procedures

CE VI Construction Engineer Resume Examples & Samples

District-wide travel
Comprehensive knowledge of the modern methods and practices of public works construction and maintenance operations
Ability to promote, establish, and maintain harmonious relationships with staff and the general public

Senior Construction Engineer Resume Examples & Samples

Co-ordination of the site functions to meet project requirements, especially in respect of schedule. To monitor performance against the schedule and implement corrective action, as necessary
Co-ordinate and report on a weekly and monthly basis on all contract matters, in particular, progress statements and problem areas
Ensure that site procedures are adhered to, in accordance with project requirements, including matters of safety and security
Ensure adequate and qualified supervision and skilled labour resources are employed to meet schedule requirements
Implement working to the relevant site or national agreements and establish working conditions, welfare facilities, safety plan and other related matters
Identification of changes to sub-contractors contracts and support of claims as requested
Hold regular meetings with the project office management and the various sub-contractors to review progress and resolve problems, etc
To read, understand and implement the Project Safety Policy and the arrangements described in the project Safety Management System documents
More than 12 years construction management experience of chemical and petro-chemical project
Be familiar with the specification and procedure of domestic and foreign project management
Good co-ordination and communication skill
Good English speaking and writing skill

100

Construction Engineer Resume Examples & Samples

Provides engineering guidance and administration for the construction of highway and related construction projects. This involves interpreting specifications, plans and special provisions and the supervision of other engineers and engineering technicians
Provides effective leadership to work unit thru priority outcomes, performance reviews, coaching and counseling, discipline and providing development opportunities for employees under positions supervision
Due to seasonal work, incumbent will be required to work additional hours including nights and weekends. Additional hours will be assigned by the supervisor depending upon the needs of the agency

101

Construction Engineer Resume Examples & Samples

Departmental Support; Communicate, track and coordinate the due diligence required for sites in the current build plan. Coordinate and track service requests for embedded base of cells. Create Funding and Purchase Order Requests and manage receipts. Assist in closing out year-end capital spending. Prepare and submit contract files for abstracting
Utility Coordination; review construction drawings, place utility work orders, track progress, address any billing issues
Coordinate troubleshooting and optimization requests for embedded base cell sites
Determine equipment requirements and coordinate installation services with general contractors
Administration and Reporting; Monitor and report on internal and external vendors in regard to meeting project deadlines. Coordinate, monitor and report daily/weekly on the progress of service requests. Manage site documentation and recording as necessary
Serve as the Implementation-Construction point of contact for Siterra and SiteTraker. All team and general contract requests will be routed to this individual

102

Construction Engineer Resume Examples & Samples

Coordinate with engineering on constructability and design issues relating to the piping discipline such as underground and above ground piping installation and pipe supports
Specify the piping criteria for the construction of temporary construction facilities as required
Develop the piping construction quality program, including project procedure and construction automation tool selection and development
Identify and communicate key engineering/procurement data attributes and deliverables, needing to be developed during design development in order to support construction operations
Support construction schedule development, including defining interfaces with other disciplines/commodities
Support project cost estimation development
Plan and estimate piping related temporary utilities and facilities
Work with UK contractors and suppliers to develop the construction execution and contracting strategies
Responsible for quantity take-off, control, tracking, reporting and forecasting for piping discipline
Prepare requisitions for field procured materials, material substitution, services and equipment such as pipes, valves and hangers
Review material receiving reports and warehousing to assure delivery of correct piping materials
Direct preparation of cost estimates for piping construction activities and coordinate the preparation of cost reports, forecast and progress reports
Plan and recommend piping procedures to be implemented by Field Supervision to ensure construction operations are within requirements of engineering design and specifications
Coordinate subcontract activities to ensure piping materials, equipment and quality comply with design plans and specifications
Implement controls over variables affecting piping job progress such as piping installation and receipt to ensure engineering and procurement provide timely delivery of drawings, materials and equipment and ensure that other corporate programs are fully utilized
Aid the development of hydro packages and verify and witness hydro acceptance
Perform other duties as required by site management
Ensure corporate policies and NWPP procedures are fully implemented
Knowledge of NPP Construction preferred
Piping construction planning experience preferred
Large scale project construction delivery experience (1B £ +) preferred
Working knowledge of piping operations
Knowledge of Bechtel’s “Zero Accidents” safety program
Computer literate in timekeeping, word processing, spreadsheet, and technical database applications in accordance with current Bechtel Standard Application Program (BSAP) standards
Knowledge of current industry quality standards
Knowledge of local labour laws and issues
Work experience leading to a thorough understanding of the knowledge described above

103

Construction Engineer Resume Examples & Samples

Coordinate with engineering on constructability and design issues relating to the electrical discipline
Specify the electrical criteria for the construction of temporary construction facilities as required
Develop the electrical construction quality program, including project procedure and construction automation tool selection and development
Plan and estimate electrical related temporary utilities and facilities
Responsible for quantity take-off, control, tracking, reporting and forecasting for electrical discipline
Prepare requisitions for field procured materials, material substitution, services and equipment
Review material receiving reports and warehousing to assure delivery of correct electrical materials
Direct preparation of cost estimates for electrical construction activities and coordinate the preparation of cost reports, forecast and progress reports
Plan and recommend electrical procedures to be implemented by Field Supervision to ensure construction operations are within requirements of engineering design and specifications
Coordinate subcontract activities to ensure electrical materials, equipment and quality comply with design plans and specifications
Implement controls over variables affecting electrical job progress such as such as electrical installation and receipt to ensure engineering and procurement provide timely delivery of drawings, materials and equipment and ensure that other corporate programs are fully utilized
Undertake and develop the electrical testing program
Electrical construction planning experience preferred
Working knowledge of electrical operations

104

Construction Engineer Resume Examples & Samples

Coordinate with engineering on constructability and design issues relating to the mechanical discipline
Specify the mechanical criteria for the construction of temporary construction facilities as required
Develop the mechanical construction quality program, including project procedure and construction automation tool selection and development
Plan and estimate mechanical related temporary utilities and facilities
Responsible for quantity take-off, control, tracking, reporting and forecasting for mechanical discipline
Prepare of requisitions for field procured materials, material substitution, services and equipment
Review material receiving reports and warehousing to assure delivery of correct mechanical materials
Direct preparation of cost estimates for mechanical construction activities and coordinate the preparation of cost reports, forecast and progress reports
Plan and recommend mechanical procedures to be implemented by Field Supervision to ensure construction operations are within requirements of engineering design and specifications
Coordinate subcontract activities to ensure mechanical materials, equipment and quality comply with design plans and specifications
Implement controls over variables affecting mechanical job progress such as such as mechanical installation and receipt to ensure engineering and procurement provide timely delivery of drawings, materials and equipment and ensure that other corporate programs are fully utilized
Undertake mechanical testing including leak testing and cleaning/flushing
Mechanical construction planning experience preferred
Working knowledge of mechanical operations

105

Construction Engineer, UK Resume Examples & Samples

Experience in Construction Management
Understanding or prior experience with administering NEC3 contracts
A good understanding of construction techniques and methodologies applicable to the Works
Capable in managing peers
Comfortable dealing with ambiguity and change in a fast-paced and complex environment
Eligible to work in the UK

106

Project Construction Engineer Resume Examples & Samples

Plan and coordinate the construction/installation of all phases of a project, a segment of a project(s), multiple small projects/work orders, and/or support contracts at a plant site
Provide leadership and direction, set expectations, and audit to assure achievement of safety goals, productivity of the workforce, completion of projects at or below estimate, attainment of schedules and quality of work
During FEL, proactively provide input to the project team(s), constructibility analysis, construction scopes of work and inclusion of innovative/cost effective construction technologies
Ensure that safety is designed into the projects and that safety requirements are included in contracts
Participate in preparing and reviewing project estimates
Participate in development and implementation of procurement plans
Administer and implement contracts in his/her area of responsibility
Set goals and performance standards and manage priorities to meet business needs and objectives
Responsible for preparation of integrated project schedules
Know the specifications, standards, methods, scope of work, design, and other technical information specific to his/her assignment/projects
Overall Planning and Scheduling for work in his/her segment
Assure materials and equipment are available and are delivered to the proper locations so as to maintain schedule and productivity
Documentation of change during installation
Oral and written communication; good documentation practices
Knowledge of team interactions; collaborative work environment practices
Ability to proactively lead and motivate contractors and others to complete assigned tasks on schedule
Ability to convince others of the best course of action in a way that gains understanding, commitment and results in win/win solutions
Ability to plan and organize complex, multi-disciplined construction projects including the allocation of resources and preparation of realistic schedules
Ability to lead/manage multiple small projects simultaneously
Has broad knowledge of construction methods and people throughout the company and in contractor organizations
Knowledge of and ability to use the Guide to Project Implementation (GPI) and $0-$5MM “best practices”
Ability to perform constructibility analysis
Ability to review estimates for validity and to use them to develop plans and schedules
Knowledge of project change order procedures
Excellent understanding of the contracting and purchasing processes
Use of scheduling tools (e.g. Primavera, Microsoft Project)
Knowledge of construction and site safety and environmental procedures/policies
Knowledge of Best Practices for safety (SHE), contracting/sourcing, cost control, quality assurance, scheduling, project cycle time reduction, invoicing, value engineering, and front end loading
Skill, ability, and experience in networking and teamwork, negotiating, planning, application of construction technology and applications, defining project scope, and translating scope into cost estimates
Completed an approved certified Apprenticeship Training course of 3-5 years and have a minimum of seven years of practical work experience, or a Bachelor’s degree in Civil, Mechanical, or Electrical Engineering with a minimum three year previous work experience in the related fields
Scheduling abilities utilizing Prima Vera, Microsoft and etc
Excel and Power Point abilities
Demonstrated ability to lead and motivate team members to complete assigned tasks on schedule
Drafting/Design skills experience
Communication skills and demonstrate knowledge principles of Project methods
Innovation knowledge-Use of Modular and SSAS (Segmental Structural Assembly System) techniques
Proficient in SAP

107

Senior Construction Engineer Resume Examples & Samples

Provide onsite Resident Engineering support for significant wastewater treatment plant construction project and other water/wastewater process projects
Work location will be in the Baltimore metropolitan region initially, with ability to provide similar support for other local and regional clients
Oversee and direct construction projects from conception to completion
Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations
Meet contractual conditions of performance
Review the work progress daily
Produce effective and accurate written documents, reports, and technical memorandums
Analyze, manage, and mitigate risks
Ensure quality construction standards and the use of proper construction techniques
BS degree, Master’s degree preferable, in Civil Engineering, Mechanical Engineering, or related field. Candidates without an engineering degree but possessing significant construction management experience will be considered as well
Proven working experience in construction management and resident engineering
Working knowledge of civil, mechanical and electrical construction practices
PE and/or CCM preferable but not required

108

Assistant Division Construction Engineer Resume Examples & Samples

Experience in administration of Highway Construction Contracts including use of the Highway Construction and Materials System (HiCAMS)
Experience in Supplemental Agreement development and review
Experience reviewing and writing responses to Construction Claims
Working knowledge of NCDOT Standard Specifications and Project Special Provisions

109

Construction Engineer Resume Examples & Samples

Skills / Knowledge / Abilities: Excellent knowledge on Foxboro DCS & Triconex / Tricon Safety System installation by Revamping, Retrofit & Upgrading the systems at site
Experience: Minimum 8 To 10 Years
Education/Training/Certification: Bachelor of Engineering in Instrumentation / Electronics & Communication
To follow strictly client's Health Safety, Environment & Security regulations at site during execution
To make sure the activities at site are adhering to the Project Schedule, Quality & Safety Plan
1) A minimum Bachelor Degree in Electrical/ Electronics/ Control Instrumentation engineering
2) Minimum of 10 to 12 years of experience in the Control Automation systems, preferably, DCS, ESD, SCADA and M&I
3) Minimum of 3 to 4 years of experience of managing the site construction activities

110

Project Engineer / Construction Engineer Resume Examples & Samples

Develop and maintain project schedules associated with preliminary planning and fully developed construction schedules utilized during the delivery phase of the project
Establish and maintain document control processes to manage project correspondence during all phases of the project
Minimum two years of experience in a combination of traditional and design build project delivery environments. Proven field experience in coordination of the primary responsibilities essential to the position
Bachelor’s degree in engineering or construction management related discipline required
In pursuit of PE registration or professional registration, with supporting experience to gain the referenced credentials
Proven track record of successfully supporting water/wastewater traditional and design build projects
Excellent computer skills and the use of software including but not limited to Excel, Word, Primavera Tools, AutoCAD and database management tools
Excellent communication and interpersonal skills in the implementation of the daily execution of key functions while coordinating with engineering, field management and building trade staff
Flexibility in geography as related to office and/or project site location, with ability to relocate as needed

111

Construction Engineer Resume Examples & Samples

Experience in construction at least 2 years
1 year experience in NGO work
Construction experiences and skills
Good qualifications working on Autocad
Renovation and rehabilitation experience is preferable
Excellent English Communication skills (oral and written)
Commitment to World Vision Core values
Understanding of SWM issues in Jordan
Cross cultural sensitivity, flexible world view, emotional maturity and physical stamina
Knowledge of and adherence to NGO Code of Conduct, understands other international development guidelines

112

Construction Engineer Resume Examples & Samples

Assures implementation of plans and specifications
Assures construction activities are in accordance with contractual documents and are completed within budget and schedule
May monitor activities of staff
Overall administration of project

113

Piping Construction Engineer Resume Examples & Samples

HNC in an Engineering related subject
Recognised O&G discipline background
Conversant with construction project management process
Good knowledge of O&G related safe working practices
BOSIET/Approved Offshore Medical – essential for an offshore position

114

Construction Engineer Resume Examples & Samples

Provide initial review of administrative and engineering submittals for completeness and compliance with the contract documents
Use Contract Manager (CM14) software in review of technical submittals, contract drawings, tracking issues and problems to resolution
Coordinate communications between the contractor, construction manager and other stakeholders
Review incoming correspondence and draft responses on behalf of the Resident Engineer to address issue(s) identified within the correspondence
Evaluate contractor generated Requests for Information to verify the accuracy of the information conveyed to assist the Engineer of Record in resolution of design issues, ambiguity, conflicts, and errors/omissions
Assist in preparation of change order documents and Engineer’s Estimates
Assist in negotiation of change orders with Contractor
Maintain a set of construction documents that identifies all scope changes issued through the RFI or Designer generated changes to the conformed bid documents
Participate in review and evaluation of contractor claims and change order proposals
Assist in the monitoring of the Contractor’s quality program and safety programs to verify compliance with the programs as approved and employed on the project
Experience in use of CM14

115

Construction Engineer Senior Resume Examples & Samples

Proficient in construction contract documents and processes
Familiarity with OSHA regulations
Proficient interpretation of design drawings with company standards and specifications applicable for all State and County building agencies in support of construction projects
Shown installation knowledge of architectural, mechanical OR electrical system installations
Familiarity with preparing and evaluating cost estimates at various stages of project maturity from preliminary concept to construction bids
Experience directing and managing outside contractors and vendors throughout all phases of the construction process for multiple projects up to $50+ million
Able to represent project accountability to executive level Leadership
Prior risk management/safety assessment experience required
Proficient in Microsoft Office: Power Point, Word, Project Scheduling or similar scheduling tool
Shown as leader that can support team managerial areas, process improvements, and is a self-starter
Motivated with excellent interpersonal customer skills, time management for multi-tasking several projects concurrently, and organizational strength. Knowledge and training
Shown experience in executive communication and representing the organization through providing solutions to difficult technical issues associated with specific projects
Experience or schooling in Construction discipline, hold PMP or LEED certifications, or recent LEAN Construction project development examples
Holds additional project knowledge in unique laboratories, aerospace assembly, test operation areas, and cleanrooms

116

Construction Engineer Resume Examples & Samples

The Construction Engineer manages project development from initial site design through as-built drawings. Primary projects include small cells and ODAS projects. This may includeother cell sites,In Bound Collocations, and In Building projects. Responsibilities including drawing review for compliance with civil, structural, mechanical, and electrical standards
Manage the construction schedule in SiteTraker
Utilize Xpress Tool in the bidding process
Manage the construction tasks in Siterra. Coordinate with the Equipment Engineers to ensure equipment is ordered timely, no construction is delayed due to lack of materials, and CIP is kept at 18% or less

117

Construction Engineer Resume Examples & Samples

Coordinates with contractor, client, and staff daily to ensure the project is constructed in accordance to the plans and specifications
Oversee and develop junior staff
Active with local engineering groups
Inspection of highway and bridges
Work in the field in the weather conditions that are similar to Houston, Texas
Excel Skills a plus-knowledge of creating micros, formulas, linking tabs/sheets, pivot tables
Experience in construction of civil, highway and bridges
Experience working with/for a governmental agency
Experience in use and ability to train others
ACI certifications would be a benefit

118

Construction Engineer Resume Examples & Samples

Review Contactor submittals
Take reasonable care of your own and others for HSSE, by focusing on the potential outcomes of your actions and using the RightWay
Experience in working with Stakeholders
Result orientated
Confident and assertive

119

Construction Engineer Resume Examples & Samples

At least 10 years of construction management experience managing all signal system elements including Train Control/Train Signals and interfaces with other rail systems such as Communications, SCADA System and rail
Experience must include direct responsibility for supervision of procurement, installation, testing and commissioning of signal systems including systems integration Testing and safety certification of systems
Experience of review and provision of constructive comments on submittals of various types, including

120

Construction Engineer, N Djamena, Chad Resume Examples & Samples

Apply/introduce innovative approaches and good practice in construction to build the capacity of government counterparts, national construction companies, NGO’s, quality assurance supervision entities and global partners/allies/donors/academia to improve the quality of the construction implementation programme
Keep abreast, research, benchmark and implement best practices in education in emergency construction best practices and knowledge learned
Contribute to the development and implementation of Technical Guides and Manuals to ensure optimum maintenance of the constructed school infrastructure

121

Construction Engineer Resume Examples & Samples

Understanding of current safety legislation
Keen awareness of management of behavioral based site safety programs
Understanding of piping engineering and construction disciplines, particularly in the onshore Oil and Gas related fields
Understand how to read relevant engineering drawings, specifications and codes
Ability to understand logic linked schedules (P3/P6 or similar)
Ability to communicate effectively with contractor's/line managers/ and supervision in English language (oral and written)
Knowledge and understanding of management operating systems
Good IT skills, (understanding of MS office, etc
Promoting project HSE objectives
Provide direction and leadership to the Contractor works scope in respect of piping works, both above and below ground
Lead the Construction team Lessons Learned Process
Participate in the Onshore team Risk Management Process
Participate in task risk assessment meetings
Expediting site query response from Contractor where applicable
Providing assistance to the construction contractor for resolution of issues, etc
Witnessing approving site acceptance tests
Assist Quality department in assurance and control activities
Review and acceptance of contractor construction procedures
Review and acceptance of contractor procedures for fabrication, assembly and erection of the
Monitor contractor performance and highlight any concerns to line manager
Attending project meetings as required
Compilation of reports as required

Download Construction Engineer Resume Sample as Image file

Related Job Titles

Aerodynamics Engineer Resume Sample

Construction Project Engineer Resume Sample

Dsp Engineer Resume Sample

Lean Engineer Resume Sample

EMC Engineer Resume Sample

PKI Engineer Resume Sample

Metallurgical Engineer Resume Sample

Engineer Construction Resume Sample

Inspection Engineer Resume Sample

Construction Field Engineer Resume Sample

Water Resource Engineer Resume Sample

Diagnostics Engineer Resume Sample

Browse More

Construction Engineer Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Construction Engineer resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Senior Piping Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Senior. / Lead Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Lead Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Senior Construction Engineer Resume Examples & Samples

Lead Construction Engineer Resume Examples & Samples

Assistant State Construction Engineer Resume Examples & Samples

E&I Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Nightshift E&I Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

I&E Construction Engineer Senior Resume Examples & Samples

E&I Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Principal Construction Engineer Resume Examples & Samples

Senior Construction Engineer Resume Examples & Samples

Senior Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Field Construction Engineer Resume Examples & Samples

Principal Construction Engineer Resume Examples & Samples

Construction Engineer / Specialist, Senior Resume Examples & Samples

Area Construction Engineer / Specialist Resume Examples & Samples

Principal Construction Engineer / Specialist Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

Area Construction Engineer / Specialist Resume Examples & Samples

Principal Construction Engineer Resume Examples & Samples

Construction Engineer Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume