RF Technician Job Description
RF technician
provides support to the engineering activities such as design, test, checkout, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment.
RF Technician Duties & Responsibilities
To write an effective RF technician job description, begin by listing detailed duties, responsibilities and expectations. We have included RF technician job description templates that you can modify and use.
Sample responsibilities for this position include:
Working knowledge of low frequency RF propagation
Conducting root case failure analysis and troubleshooting on suspected defective equipment
Performing repetitive electromechanical assembly using hand and electric tools
Performing component level and board repairs
Align, tune, and test MW& RF Circuits and Subsystems
Troubleshoot parts up to the board and component level
Work with oscillator and Phase lock loops
Assist our engineering staff in analyzing, designing, testing and evaluating RF devices in support of the Naval Surface Warfare Center in Dahlgren, Virginia
Develop various component technologies, including antennas, signal processors and printed circuit boards
Supports the telco interfaces of larger systems the LAN/WAN and Microwave networking links
RF Technician Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for RF Technician
List any licenses or certifications required by the position: IPC, J-STD, IAT, ITIL, STD, COTS, NCO, IP, CAT5/6, RF
Education for RF Technician
Typically a job would require a certain level of education.
Employers hiring for the RF technician job most commonly would prefer for their future employee to have a relevant degree such as Associate and Collage Degree in Electronics, Technical, Associates, Military, Education, Engineering, Department of Education, Electrical Engineering, Communication, Electronics Technology
Skills for RF Technician
Desired skills for RF technician include:
Hand tools and Electrical/RF test equipment
Network analyzer are desirable
S-parameters
Electronic test equipment
Statistical process control as applied to related assembly
Inspection and test processes
Spectrum Analyzers
Analog and digital circuitry
Coaxial cable measurement
Desired experience for RF technician includes:
Must have sufficient vision to see relative positions of small parts and able to discern symmetry and proper alignment
Must wear appropriate personal protective equipment as necessary
Current active security clearance preferred
Provides primary point of contact for 2-5 customer sites that require end-to-end performance monitoring and management
Understands SmartZone Trunking, Secure, and Client-Server Networking concepts
Advanced knowledge of computer systems and Intermediate knowledge networking
RF Technician Examples
1
RF Technician Job Description
Job Description Example
Our growing company is looking for a RF technician. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for RF technician
- Follow the test schedule to achieve deadlines based on the standard test time
- Test the product according to the design engineer instructions, test plans, customer specificiations, internal specificiations & procedures
- Propose improvements to the test methodology keeping in mind efficiency and effectiveness
- Maintain the integrity of the test systems by running the golden units and recording the values on the designated system
- Maintain the lab keeping it organized and clean by following the 5s methodology and internal policies
- Operates and maintains systems used in RF communications including trunked radio systems, military communication, and microwave systems
- Maintain backhaul and primary network distribution consisting of fiber, CAT5/6, wired and wireless communications equipment (switches, routers, muxes, telecommunications equipment and cable plants)
- Conducting a variety of tests including manufacturing verification, engineering tests (as required), operational tests and fault isolation to component level on printed circuit assemblies (PCAs) and to the card-level on man-pack radios and antenna equipment in production or field returns
- Establish routine maintenance procedures of RF components (cal kits, cables, power combiners, pads, filters, couplers)
- Identify opportunities for improvement on production floor and board lab
Qualifications for RF technician
- Ability to learn to use computer operating systems and common application for characterizing and resolving issues for multiple technologies
- Must meet the requirements to drive a company vehicle (have a valid driver's license and clean driving record)
- Must have a DOD Secret clearance on first day of work and be capable of obtaining and maintaining a Top Secret/SCI clearance
- Knowledge and experience with facility support systems for RF ground stations (power, HVAC, ) is a plus
- Leadership experience with small maintenance teams
- IAT level 1 certification a plus
2
RF Technician Job Description
Job Description Example
Our growing company is looking to fill the role of RF technician. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for RF technician
- Examines less complex customer samples and learns to operate appropriate tests for each case
- Operates and maintains simple test equipment appropriately to measure and test customer samples
- Integrates basic continuous improvement concepts and techniques into all aspects of the job
- Test Antenna systems for existing and new products
- Operate the Anechoic Chamber and the lab equipment
- Provide production support on new and existing designs
- Basic Lab work
- Attend program, staff, company, production group meetings
- This responsibility includes the Mpeg 2/Mpeg 4 transport streams and all associated Local Collection Facilities, Broadcast Centers, Ground station Equipment, and associated Monitor and Control hardware
- Test station setup and calibration
Qualifications for RF technician
- Two year Technical or Associate's Degree, plus minimum 5years/ or minimum 8 years in an RF lab environment
- Ability to work periods of time without direct supervision
- An understanding of basic electrical/electronic theory, measurement and analysis methods including, antenna gain, return loss (VSWR), isolation
- Familiar with the operation of HP, Scalar and Network Analyzer and related equipment
- Demonstrated proficiency with computerized PC based programming languages (particularly Visual Basic) or basic electrical writing skills is a plus, CAD drafting, schematics, word processing and spreadsheet software, SAP , and Andrew-specific software
- Demonstrated ability to write detailed reports and document results of experiments
3
RF Technician Job Description
Job Description Example
Our growing company is searching for experienced candidates for the position of RF technician. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for RF technician
- Maintenance of test data
- Assembly of breadboards, test fixtures and wiring harnesses
- Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions
- Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel
- Operates designated machines and special laboratory equipment
- Receives instructions from and reports data to engineers and other laboratory personnel
- Records observed or calculated data on appropriate UL forms and prepares data sheets and test reports
- The technician follows basically defined test plans and datasheets
- Integrate new technologies into a production process
- Train R&D processes to Production Operators
Qualifications for RF technician
- Associate's degree in physics/mechanical technology from an accredited school and have ten (10) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards with a working knowledge of the basic concepts of electronics and science
- Able to work in a team environment and handle rapidly changing assignments
- Minimum of 10 years experience with RF and microwave amplifier test and evaluation
- Ability to analyze, troubleshoot and remedy analog, RF and microwave circuits
- Hands-on experience with RF test equipment, including spectrum and network analyzers, power meters, oscilloscopes and power supplies
- Must be practical, accurate and responsible
4
RF Technician Job Description
Job Description Example
Our innovative and growing company is searching for experienced candidates for the position of RF technician. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for RF technician
- Must be able to work closely with engineers
- Must be proficient at reading and understanding technical documents
- Must have the ability to adjust to changing priorities and schedules
- Must be able to follow verbal and written work instructions
- Must be able to coordinate several tasks in multiple areas
- Must be self motivated and have the ability to focus and complete assigned tasks
- Perform work based on sketches, engineering drawings, and schematics
- Follow steps documented in procedures, task performance sheets, discrepancy report interim dispositions, procedures and WADs
- Performs maintenance and operation functions associated with the electronic and mechanical equipment in assigned laboratory or work area
- Conducts antenna pattern measurements and electrical tests of microwave transmission line components
Qualifications for RF technician
- Ideal candidates will possess a secret clearance or have the ability to obtain one
- Basic knowledge of RF, electronics and ESD procedures
- Ability to handle multiple assignments at once
- Enthusiastic team player, skilled at working with other professionals in a close-knit, dynamic group, eager to develop solutions
- Automation/test integration experience is a plus
- Process test development and documentation
5
RF Technician Job Description
Job Description Example
Our growing company is hiring for a RF technician. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for RF technician
- Selects and sets up test equipment and test beds
- Participates in scheduled and unscheduled operations by operating online and offline equipment, making necessary adjustments and alignments, monitoring meters/scopes and records data
- Identify existing and potential issues during test reviews, and immediately communicate issues to staff
- Conduct parts and calibrated tools inventory and perform other laboratory duties as required
- Maintain a safe, clean and orderly work area and adhere to laboratory policies
- Coach and mentor lesser skilled technicians
- Work after hours and/or weekends as required
- Provide technical assistance and maintenance to the Process Engineering, Process Development, and R&D groups
- Train operators on departmental procedures
- Perform routine maintenance on tools
Qualifications for RF technician
- Good analytic, presentation, written and oral communications skills are required
- DOE and data analysis
- FMEA and control plan
- Advanced electronic test and troubleshooting skills
- Basic computer skills including good skills with Microsoft Office
- Associates or Associates of Science degree in Electronics Technology or equivalent experience