Production Tech Resume Samples
4.7
(122 votes) for
Production Tech Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the production tech job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
FW
F Watsica
Fabiola
Watsica
33078 Christiansen Lane
Boston
MA
+1 (555) 756 8051
33078 Christiansen Lane
Boston
MA
Phone
p
+1 (555) 756 8051
Experience
Experience
Phoenix, AZ
Production Tech
Phoenix, AZ
Little-Gislason
Phoenix, AZ
Production Tech
- Assists in the creation of radio advertising and station promotions by providing administrative project or process support to department managers or staff
- Work Collaboratively with Customer Service, Material management, Quality, and Production Departments to resolve issues
- Work as a team with other operators to ensure no line stoppages and improve operations
- Documents work performed by filling out proper forms (labor, QCR’s, etc.)
- Performs complex component placement and alignment using bonding and curing procedures while referencing work instructions and mechanical drawings
- Perform floor manager duties during live and taped productions
- Perform PCB inspection, soldering and rework. Programming and loading of firmware onto boards for production use
Chicago, IL
Production Tech-ifa
Chicago, IL
Carter-DuBuque
Chicago, IL
Production Tech-ifa
- Make necessary adjustments in Lowis
- Make necessary adjustments in Life of Well Information System (LOWIS)
- Participate daily with IWA, IWC/POC, AT, Engineers concerning daily alarm exceptions
- Repair or replace casing monitors
- Check all wells with casing alert
- Participate daily with Well Performance Specialists (WPS), POC/IWC technicians , Automation Technicians (AT), and Production and Reservoir engineers concerning daily alarm exceptions
- Repair or replace motor controller
present
Dallas, TX
Production Tech Iiib-small Products
Dallas, TX
Lynch Group
present
Dallas, TX
Production Tech Iiib-small Products
present
- Performs further quality checks after machine is warmed up and makes final machine adjustments
- Ensures that all work activities are performed in accordance with established safety and environmental standards
- Performs shop floor housekeeping duties to maintain a neat and orderly work area
- Uses hand tools, clamps, lock bolts and other items to arrange cutters, quills, punches, dies and associated parts in the proper relationship to each other to produce parts as detailed on blueprints
- Utilizes catch pan to segregate parts currently being produced from main tub. Measures parts in catch pan to determine conformance to specifications. Segregates non-conforming product for disposition
- Performs machine inspections and conduct preventive maintenance, which may include changing oil, greasing lubrication points and making routine adjustments to machine mechanisms
- Seeks to continuously improve safety, quality and productivity in areas of responsibility
Education
Education
Bachelor’s Degree in Life Sciences
Bachelor’s Degree in Life Sciences
Central Michigan University
Bachelor’s Degree in Life Sciences
Skills
Skills
- Resource Knowledge – Knowledge of internal and external tools and resources available to accomplish tasks and achieve results
- Ability to learn new tasks quickly
- Ability to perform detailed work on small surfaces
- Solid Interpersonal skills…ability to interact with various departments throughout the organization
- Highly proficient with MS Office applications, Google software applications and other software used by Production Operations team
- Ability to adapt to quick change
- Valid Driver’s License with an acceptable driving record
- Ability to keep neat and accurate records
- Knowledge of audio/video playback systems
- Ability to identify operational inefficiencies
15 Production Tech resume templates
Read our complete resume writing guides
1
CSG Production Tech / Dubber Resume Examples & Samples
- Dubbing: Recording audio from Vcreative or other source into Nexgen and ensuring flawless delivery of commercials to local stations
- Able to work efficiently and accurately to meet each time zone/market’s daily deadline
- Communication with local markets regarding quality control of commercials
2
Production Tech Resume Examples & Samples
- Assists in the creation of radio advertising and station promotions by providing administrative project or process support to department managers or staff
- Executes general department administrative duties including ordering office supplies, sorting mail, making travel arrangements and scheduling meetings, etc
- Prepares and reports on research and data analysis projects
- Interacts with company personnel at all organizational levels
- May research stories and book guests
- May edit audio segments
- May be required to coordinate activities between departments and/or outside parties
- Proficient in Microsoft Office suite, social networking platforms and basic audio production tools
- Excellent oral and written communication skills; excellent grammar
- Strong editorial skills including use of radio automation systems; ability to edit audio for clarity and time
- Strong time management skills; adept at setting priorities
- Serious attention to detail, ability to multi task, juggle demanding deadlines, and work across departments
- Stress tolerance especially under pressure and with tight deadlines
- Effective collaborator with multiple levels within an organization
- 2+ years’ experience in radio production, broadcast and/or communications
- Journalism background a plus
3
Production Tech, nd Shift Resume Examples & Samples
- Proficient knowledge in current Good Manufacturing Practices (GMP), Food and Drug Administration (FDA), OSHA and other regulatory requirements
- Basic understanding of electrical systems, sensors and photo eyes etc
- Basic understanding of mechanical systems, like power transmission, pumps, gears
- Basic understanding of pneumatic control systems
- Basic understanding of facility and equipment operations and maintenance practices
- Standard Operating Procedures for equipment operations including safety rules and regulations
- Coca-Cola P.I.T. Certified
- Freestyle ASRS
- Dambach Lagersysteme Crane Operation (Basic Operation, Crane Faults, troubleshooting, etc.)
- Pick Pack Operations ( Lead Processor, Replenisher, Order Picker) experience
- Inventory Cycle Counts
- Proficient capability in computer software such as MS Word, MS Excel, MS PP
- SAP (P08) WM, IM (TCodes-MB5M, VL02N, VL06O, LT27, MB1B, LX02, YTOTS, etc
- CCAWS
- DATAPASS
- IFIX
- Verilogix
- Tote Terminator
- Tote Manager
- SU Discrepancy Software
- Ability to work eight-hour shifts, 12-hour shifts, weekends or other work schedules as determined by business need, including overtime, holidays as required
4
Production Tech Lead-st Shift Resume Examples & Samples
- Performs activities to maintain a working knowledge and understanding of machine components and manufacturing operation
- Performs basic maintenance on assigned machines and components
- Demonstrates strong understanding of computers and keyboard functions
- Applies advanced troubleshooting skills for pocket issues such as doubles, misfeeds and jams
- Demonstrates mathematical skills by calculating labor hours per thousand and machine uptime
- Performs activities to maintain a strong knowledge and understanding of machine components and operation, including jacket pocket, carousal, stacker, and auto-strapper
- Demonstrates effective written and verbal English communication skills as a trainer for new hires and temporary associates
- Collects, analyzes, and reports critical objective data and information to supervisor, recommending improved machine use, quality control, and staff utilization
- Communicates with management via e-mail or other computer based methods
- Performs safety audits, correcting and documenting any safety behavior issues with team members
- Reports and/or corrects machine safety issues
- 3 – 5 years related experience
- Cell Lead experience \(multiple machines\)
- Ability to troubleshoot machine problems
- Demonstrates advance skills in computers and production reports
- Ability to speak and communicate effectively utilizing the English language
- Advanced computer software experience
- Strong knowledge and understanding of machine components and manufacturing operation
5
Print Production Tech Resume Examples & Samples
- Plan and execute print production jobs to meet project deadlines, and inspect all printing jobs to ensure all customer and Company specifications are met prior to shipping
- Stay current with all printing equipment operating manuals, and maintain current and accurate print production job processes
- Maintain printing equipment for proper working order, coordinate with printing equipment vendor(s) on servicing printing equipment(s); inventory and order printing supplies, properly remove waste products, toner bottles, paper, and other printing waste
- 1-6 years experience in digital printing
- Good written communication and verbal communication skills
- Demonstrate the ability to prioritized, handle many print jobs, functions at one time and deal with multiple file types
- Demonstrate flexibility to adjust to rapidly changing requirements and schedules
- Ability to work effectively with management
- Quickly and efficiently test incoming files for ability to output as required on the appropriate output devices
- Flexible and adaptable, able to change and alter according to changes in projects or business environment
- Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines
- Inspect output material including paper, toner coverage to assure conformance to job and company requirements
- Place service calls on printers and supporting equipment. Perform necessary repairs covered in Konica Minolta ORU training
- Basic computer skills including familiarity with Word, Excel, and Internet usage
- Strong knowledge of Adobe Creative Suite
- Creo Rip/Trap Workflow
- Creo imposition software
- Color calibration software
- Adobe Acrobat to open and edit PDF files as necessary
6
Production Tech-pfa Resume Examples & Samples
- 5+ years oil and gas industry experienced preferred
- Understanding of importance of environmental and safe work practices
- Ability to identify operational inefficiencies
- Ability to implement cost effective solutions
- Valid Driver’s License with an acceptable driving record
7
Production Tech-ifa Resume Examples & Samples
- Participate daily with IWA, IWC/POC, AT, Engineers concerning daily alarm exceptions
- Addresses all daily alarm exceptions
- Troubleshoot injection exceptions
- Clear all "0" rates daily
- Make necessary adjustments in Lowis
- Check all wells with casing alert
- Clean, repair, or replace meters & change in LOWIS/ICONICS
- Calibrate or replace transducers & change in LOWIS/ICONICS
- Repair or replace motor control valve
- Repair or replace motor controller
- Repair or replace casing monitors
- Replace batteries in RTU
- Replace RTU
- Troubleshoot & replace any top cards in RTU
- Injection facility operations as needed
- Working knowledge of oil and gas production operations preferred, but will train acceptable candidate
- 2 years experience in oil field operations preferred
- Technical skills related to math and analytical processes
8
Production Tech Resume Examples & Samples
- Education: High School Diploma or GED equivalent, some college or technical training preferred
- 3+ years oil and gas industry experience preferred
- Basic Automation or Electrical experience a plus
- Strong initiative and self-starter
- Multi-task orientation with skills related to work prioritization
- Ability to work effectively in a team environment as well as by self without direct supervision
- Proficiency in the use of personal computer utilizing a windows environment
- General mechanical troubleshooting and repair skills
- Understanding of Business fundamentals
9
Production Tech Resume Examples & Samples
- Equipment and facility isolation (Lock/out Tag/out) as needed
- Maintain Company vehicle – inspect and maintain maintenance schedule
- Complete Maximo vehicle inspection sheet on time
- Issue Safe Work Permits as needed
- Perform Preventative Maintenance (PM) tasks as required
- Report Spills and Call in Corrosion Damage Reports (CDR)
- Spot Lines for excavation as needed
- Perform/Maintain Housekeeping on Facilities and Wells
- Engage Well Analyst and coordinate Well Testing to ensure we get a valid well test for every active well every 30 days
- Ensure that the Sum of the Well Test and the Daily LACT sales are within 10% of each other
- Problem Solve Invalid Well Test by working in conjunction with AT/WA/Eng
- Input data into E-Vin, LOWIS, MAXIMO as required
- Check BS&W content to maintain good oil
- Coordinate monthly allowable
- Check sample pot pressure and levels on LACT daily
- Prepare for and Participate in Production, Safety and Business meetings
- Monitor Automation systems to ensure safe and efficient operations of the wells and facilities
- Provide input on Downtime to WA
- Ensure that Downtime is captured correctly for the area assigned to the lease operator
- Check and maintain oil levels on ALL air compressors
10
Production Tech-ifa Resume Examples & Samples
- 5 plus years oilfield experience preferred, with a responsible attitude for personal safety and the safety of co-workers, contractors and the public
- Demonstrated strong commitment to safety (personal safety, co-workers, contractors and the public
- Must have valid driver’s license and an excellent driving record
- Thorough knowledge of surface equipment types and applications
- Ability to troubleshoot mechanical problems and perform root cause failure analysis
- Ability to repair minor mechanical problems
- Ability to perform preventative maintenance and to participate in root cause failure analysis
- Capable of basic troubleshooting of automation and electrical equipment. Also capable of repairing some equipment, such as actuators & level alarms and of changing out fuses, relays, etc
- Competent in computer programs applicable to his/her daily work processes
- At least High School Grad or GED
- Bachelor’s degree or degree in two year technical program
11
Production Tech Resume Examples & Samples
- Sec 4/ O/ N/ SPM/ NITEC (NTC/ ITC)/ Diploma or equivalent
- NITEC (NTC/ ITC) with at least 5 years/ Fresh Diploma
- Knowledge/ troubleshooting skills in mechanical, electrical or control engineering
- Knowledge in PLC preferred
- Able to interpret mechanical, electrical or control drawings/ circuitries and computer literacy preferred
12
Production Tech Resume Examples & Samples
- Carry out efficient machine trouble-shooting/ repair and critical equipment breakdown maintenance and ensure maximum machine uptime
- Perform highest quality maintenance work (eg TPM) in accordance to written procedures/ systems, spare parts control and management
- Participate in other assigned task force to drive for continuous process improvement
- Responsible for compliance to EHS procedure and requirement
- Knowledge/ trouble shooting skills in mechanical, electrical or control engineering
- Knowledge in PLC is preferred
- For Gamma operation
- Registered with CRP and passed Gamma Certification preferred
- Qualified to operate irradiator preferred
13
Production Tech Resume Examples & Samples
- Assembles parts in specified relationship to each other
- Standard work instructions and operating procedures with visuals
- Machine and hand tool operation instructions
- Safety procedures and instructions including, but not limited to, posted emergency evacuation instructions, hazardous chemical labeling, PPE use and maintenance, MSDS’s, and relevant OSHA regulations; and
- Product line drawings as applicable
- 100
14
Production Tech-shave Resume Examples & Samples
- Processing of parts meeting specification requirements
- Set-up and operate equipment, as assigned. May require guidance on machine troubleshooting
- Participate in assuring team tooling and material readiness
- Prepare daily production reports and forms or computer entries as required
- Perform tasks with safety protective equipment (gloves, respirators, protective clothing)
- Work in a safe manner that promotes the health and well-being of the individual and the environment
- Must be familiar with Davenport Drill, Tappers, and Okuma Machines
- Must have 3 years of manufacturing experience
- Must be able to lift/move up to 30 lbs (May not exceed per EHS Policies)
- Must be able to read, write, and understand English
15
Production Tech Resume Examples & Samples
- Understands the process associated with Filler/Packaging//Palletizing/Forklift/CIP/Sanitizing and all other product manufacturing related operations and equipment
- Direct the work of others as needed to staff manufacturing/production floor and warehouse areas
- Ability to use computer and any programs or applications as required
- Work cooperatively with Materials Management, Quality, Maintenance, and Production Departments. Assist in resolving matters that affect the efficient and effective operations of the facility
- Comply and lead compliance with Good Manufacturing Practices, Safety Policies and Procedures, and Coca-Cola Quality System procedures
- Record inspection requirements and data on provided forms
- Ensuring the accuracy of all paperwork associated with Inbound/ Outbound shipments
- Ensure Monthly Inventory reconciliations are completed
- Perform and evaluate training of associates
- Excellent attendance required
- Move and lift material weighing 50 pounds to distances of 10 feet or more, floor to waist
- Ability to hand stack cases of product from floor to over head weighing up to 35 pounds repetitively up to 8 hours
- Requirements Planning – Ability to plan materials and service requirements in order to support ongoing business
- Heavy Equipment Operation - Ability to operate heavy equipment (e.g., forklift, man-lift)
- Troubleshooting - Ability to identify and resolve process, system and/or mechanical failures (e.g., dispensing equipment, manufacturing equipment, software tools, supplier network, parts return, order flags)
- Mechanical Service Repair - Knowledge and application of equipment repair principles and Company standards associated with equipment maintenance
- Documentation Management - Knowledge of the principles of documentation management to define and manage changes to the intellectual property, project agreements, supplier agreements, The Coca-Cola Quality System (TCCQS), engineering documentation, capital assets, equipment authorization and/or packaging
- Transportation Regulations - Knowledge of the Company, local, national and international transportation and hazardous materials regulatory requirements that apply to Company locations or processes and the actions required to keep the Company in compliance with these regulations
16
Production Tech-fife, WA Resume Examples & Samples
- ) Maintain all Safety, Quality, and Compliance activities at their plant location
- ) Troubleshoot and repair defective equipment, electrical components, and production processes
- Drive a service (pickup) truck up to 2 or 3 hours per day and up to 8 hours on occasion
- Lifting 15 to 45 LBs loads intermittently
- Use of volt meters and calibration devices
- 2 - 5 years of experience in any of the following fields is desirable but not required
- Compressors and compressor maintenance
- Industrial electrical or electrician
17
Production Tech-itms Resume Examples & Samples
- Excellent written and Verbal skills
- Ability to function effectively as a Team member
- Ability to stand on feet for 8 or more hours
- Ability to work at a fast efficient pace without sacrificing quality
- Eye and hearing protection, cut/heat resistant gloves, in the ITMS cell Electro-Static Shock Prevention gear, and steel toed Shoes mandatory
- Great team work oriented attitude
18
Production Tech Resume Examples & Samples
- Performs all of the standard and some specialized and complex aspects within area of specialization
- Applies documented rules, past practices, or instruction on an independent level
- Effectively identifies problems as they occur and takes appropriate steps to solve them in situations where the problem is difficult or complex
- Advanced skills: soldering, testing, rework
- Associate’s degree or 1-2 years of vocational technical training preferred
19
Production Tech Resume Examples & Samples
- Coordinates and expedites flow of materials, parts, and assemblies between warehouse and 3PL
- Responsible for fulfilling replenishment transfers in order to supply daily production requirements
- Responsible for all end-of-month commodity counts
- Transport material from one location to another using material handling equipment
- Ability to perform general computer functions in regards to part detail and stock levels
- Ability to pick and pull service order requests accurately and responsible for systemic movement of all service order data entry transactions
- Analyze and research the variances outside of the acceptable tolerances defined for the ABC classification of each item
- Review all daily inventory error reports, research, reconcile and report all errors
- Work with key personnel to effectively implement process improvements to operational procedures in an effort to proactively optimize overall location and item level accuracy and maintain the highest possible productivity levels
- Will monitor warehouse and part transfers for accuracy and timely systemic transactions
- Verifies and keeps records on incoming and outgoing shipments and oversees preparation of items for shipment
- Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records
- Performs systemic transactions across multiple software repositories for order closeout and recording of shipment tracking information
- Ensure that the daily cycle count and location audits are conducted in a timely manner
- Ensure that the unit of measure “in” is the same as the unit of measure “out”
- APICS Certification preferred or commitment to obtain within first 2 years of employment
- 5-10 years’ experience in a warehouse or manufacturing environment
- Superior Analytical Skills
- Computer: High level proficiency in Microsoft Office
- Good Leadership skills to drive continuous process improvements in warehouse operations
- Solid Interpersonal skills…ability to interact with various departments throughout the organization
- Resourceful, can find solutions to unusual problems and meet customer needs
- Must be knowledgeable of International shipping requirements and ability to complete all paperwork associated with International shipping
- Self -Motivated, ability to work with minimal supervision
- Advanced Problem Solving
20
Production Tech Resume Examples & Samples
- Assembles, repairs, inspects and/or test products following written instructions
- Comfortable using small powered hand assembly equipment
- Clean tools and equipment per documented procedures
- Resolve problems and make routine recommendations to engineering and supervisor
- One year of experience working with PCBA and/or systems assembly
- Ability to read work instructions and repeat processes to guarantee consistent product assembly
- Ability to perform detailed work on small surfaces
- Ability to work within a team
21
General Help-pace Dairy rd Shift Production Tech Resume Examples & Samples
- Clean all equipment properly and timely to ensure safe quality products
- Clean machinery, facility structures such as racking, windows, walls and exterior of plant
- Assist machine operators in gathering production supplies, packaging materials and loading equipment, including dumping boxes and lifting stacks of cardboard
- Empty and dispose of outdated product in accordance with established guidelines
22
Aluminum Production Tech Resume Examples & Samples
- Responsible for production of parts meeting print and specification requirements
- Ability to define problems, collect data, establish facts, and draw valid conclusions using reasoning and decision making skills to ensure quality work
- Demonstrate enthusiasm, takes initiative, and works with a sense of urgency to meet or exceed routing times and quality goals
- Demonstrates learning agility and the ability to understand and interpret and variety of technical instructions including manufacturing drawings. Must have basic computer, math and reading skills
- Ability to regularly communicate and work with a team
- Must be able to lift and handle up to 35 pounds on a frequent basis
- Minimum 5 years experience working with progressive cold metal forming
- Familiar with 3/16 National, Asahi Okuma
23
Production Tech Resume Examples & Samples
- Minimum 3 years experience working in Aerospace Fastening Manufacturing
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
- Damiliar with Dettroit/Cherry Asembly Machines
24
Production Tech Resume Examples & Samples
- Operate, adjust, troubleshoot, and changeover bottling & packaging equipment
- Load raw materials and remove dunnage
- Perform quality checks and interpret quality data
- Complete production tracking
- Troubleshoot equipment problems, make basic repairs and document adjustments
- Read and use manual diagrams
- Utilize mathematics (multiplication, division, averages, and percentage calculations)
- Operate sanitation equipment (central CIP, foamers, power washers, etc)
- Comply with sanitation standards and keep area clean according to GMPs
- Conduct all PM’s and maintenance on support equipment as needed
- Monitor and log bottling equipment performance
- Operate a forklift as needed
- Cross-train on other production line equipment
- Two or more years prior experience operating production equipment
- Strong understanding of equipment troubleshooting and repair
- Two or more years of mechanical/technical experience preferred
- Willingness and ability to cross train on other production line equipment
- Ability to work self directed or in a team
- Positive attitude with a strong attendance record
- Must meet all requirements of job posting guidelines
25
Seasonal Production Tech Resume Examples & Samples
- Operate, changeover, clean, troubleshoot, and complete basic maintenance on production equipment consisting of fillers, labelers, case packers, and wrappers
- Work as a team with other operators to ensure no line stoppages and improve operations
- Two or more years prior experience in production within manufacturing, ideally in the food or beverage industry or a clean manufacturing environment
- Solid problem solving and decision making skills
- Willingness and ability to work in a facility with minimal temperature control, exposed to local temperature variations (hold & cold)
26
Production Tech Resume Examples & Samples
- Record preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics, performing mathematical calculations as needed
- Inspect raw materials against quality standards before loading raw materials
- Interact with team members, quality assurance and maintenance to maximize output and efficiency
- Provide vacation coverage to team members as needed
27
Production Tech Resume Examples & Samples
- Operating, troubleshooting, conducting basic and preventative maintenance and performing changeovers on various bottling line equipment
- Ensure the safety of self and others during all work activities
- Conducting hourly quality checks and completing online data entry and documentation for production and downtime tracking, analyzing data as needed
- Working effectively with peers as a team to support production goals
- Work with Planning, Quality and Logistics to maximize results and efficiency
- Comply with plant sanitation standards and keep work area clean
- Supports continuous improvement initiatives
- Prior experience in manufacturing preferred
- Exposure to high speed production, clean manufacturing or basic maintenance strongly desired
- Ability to work self-directed and with a team
- Solid communication and interpersonal skills with experience working in a team based environment
- Ability to interact with various internal contacts to manage the flow of work
- Computer skills with knowledge of Microsoft applications, SAP experience a plus
- Focus on safe work practices and high quality while executing duties with a sense of urgency
- Ability to move/lift 50 lbs and stand on your feet for long periods of time throughout the day
28
Production Tech-operator Blind Products Resume Examples & Samples
- Operation of assigned equipment following standard work to include loading inputs, e.g.; wire, headed parts, etc
- Perform statistical process control measurements and calculations. Complete forms or computer entries regarding those measurements and calculations as required
- Perform general housekeeping tasks which ensures the work area is neat, clean, orderly and adheres to 5S principles
- Perform machine inspections including daily, weekly and monthly preventative maintenance tasks
29
Production Tech Resume Examples & Samples
- Unpacks parts and inspects each one for proper functioning and ensures completeness
- Assembles breakers to standard drawings and customer specifications or prepares breakers for shipment or clean and prepares tanks and sub-assemblies for downstream assembly
- Discusses errors in diagrams or production order with supervisor or engineer to clarify assembly problems
- Performs assembly functions in accordance with Quality Control Procedures to ensure the output will meet QC and customer standards
- Inspects own work to ensure that each breaker is properly assembled, vacuumed, pre-filled, and ready to test and ship
- Documents work performed by filling out proper forms (labor, QCR’s, etc.)
- Cleans work area at the end of the shift
30
Production Tech-operator Small Products Resume Examples & Samples
- Accurately and thoroughly prepare daily production reports and forms
- Participate in identifying, implementing and communicating improvement opportunities in assigned work tasks
- Enter electronic maintenance requests for machine repairs
31
Cold Heading Production Tech-small Products Resume Examples & Samples
- Perform statistical process measurements / calculations. Complete forms / computer entries as required
- Order and maintain inventory levels of required tooling, gages and supplies
- Ensure that all work activities are performed in accordance with established safety and
32
Production Tech Resume Examples & Samples
- Team-oriented; excellent interpersonal and teamwork skills, with the ability to interact effectively with team members and other groups, such as analysts, technicians, and engineers
- Excellent organizational skills and attention to detail, including the ability to keep neat and accurate records
- Extensive technical skills related to math and analytical processes
- Demonstrated mechanical troubleshooting and repair skills
- Demonstrated knowledge of business fundamentals
- Good computer skills; proficient in MS Office software suite
- Ability to work with LOWIS, GraphWorx, Maximo
33
Production Tech Resume Examples & Samples
- Education: At least High School Grad or GED. Some college or technical training preferred
- Experience: 5 or more years of industry experience
- Additional experience or training in Automation and / or Electical is a plus
34
Production Tech-large Products Resume Examples & Samples
- Production of parts meeting drawing and specification requirements
- Participate in setting and achieving team and individual productivity and quality targets
- Perform shop floor housekeeping duties
- Ensure that all work activities are performed in accordance with established safety and environmental standards
- Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Alcoa Guide to Business Conduct
- Demonstrates a knowledge of and commitment to lean manufacturing principles and techniques
35
Production Tech-ontario Resume Examples & Samples
- ) Start up, shutdown, and operate the production processes
- ) Plan and execute operations and maintenance tasks for assigned plant(s)
- Walking on flat or uneven surfaces and in areas of crushed stone on a daily basis
- On Call, 24 hours, 7 days a week. Must carry cell Company Cell phone and laptop for immediate availability
- General maintenance of industrial equipment
- Industrial Heating, Ventilation, Air Conditioning (HVAC)
36
Production Tech Resume Examples & Samples
- Key qualifications include
- Prerequisites
- Applicants must be at least 18 years of age
- Able and willing to work 12 hour shifts - nights, weekends and holidays
- Must be able to successfully complete a post-offer pre-employment physical, drug screen and background check
37
Production Tech Resume Examples & Samples
- Identifies orientation of valve assembly by stamping body, bonnet and cap with traceable marking prior to disassembly
- Performs disassembly of valves and stores parts in marked bins to ensure valve to part traceability, is maintained
- Cleans valve and parts using approved solvent, blasting and grinding methods
- Performs basic visual inspection of major valve components identifying noticeable defects of damage and reporting them to the inspector
- Transport clean valves and parts to assembly area and assist with assembly as deemed necessary by supervisor
- May drive vehicle to transport stored materials from warehouse to plant or pick up items from several locations for shipment
- Must understand and follow pertinent Emerson policies and procedures relative to all assigned duties and responsibilities
- Must be customer oriented willing to work overtime as required often times with very little notice
38
Production Tech Resume Examples & Samples
- Good fluid level shooting techniques
- Dynamometer interpretation on the Sams POC’s
- Proper setup and troubleshooting POC alarms and parameters
- Echometer equipment troubleshooting
- Gas Engine setup and operation
- Team player with strong interpersonal skill set
- Self starter with the ability to work independently and meet the objectives of the job and the team
- 2 years of college with a math/science focus
39
ASU / HYD Production Tech-etiwanda, CA Resume Examples & Samples
- Controls flow purities, pressures process using SCADA/HMI/PLC system
- Work with management to maximize production and efficiency to meet the needs of our customer base adjusting flows and production rates
- Perform quality assurance functions associated with products to maintain quality assurance
- Prepares and maintains accurate records in accordance with all safety, quality, regulatory and production requirements, such as plant readings, plant maintenance, instrument calibrations, etc…
- Determines if immediate maintenance action is required and acts appropriately
- Takes initiative to improve facility (i.e. operations, reliability, and costs) without direction
- High school diploma or general education degree (GED) and 5 plus years’ industry experience; or two years technical college or military technical experience and 3 plus years’ related experience
- Critical thinking – ability to work independently to troubleshoot, diagnose & solve issues with process and plant equipment
- Water Treatment – understand the water treatment principals and equipment a plus
- Refrigeration - A basic understanding of refrigeration systems a plus
- Requires the ability to use computer programs to effectively analyze, document and track specific initiatives and goals set by management
40
Production Tech Resume Examples & Samples
- Operate audio, Vizrt, ot. graphic systems or ot. video playback systems
- Make lighting board changes Change studio light bulbs & fixtures
- Move ladders & equipment up & down ladder as necessary
- Report show problems, equipment issues, & discrepancies for inclusion
- 3 years of experience as audio operator in live environment
- Experience in use of audio board, including mix-minus, sub-masters, monitor pods, VU meters, dorrough meters, EQ pods, and computers
- Ability to accept constructive criticism
- Ability to adapt to quick change
- Be able to work on solo projects or in a team environment
- Effective Time management
- Knowledge of audio/video playback systems
- Must be able to work well in stressful conditions
- Preferred knowledge of iNEWS
- Preferred knowledge of Vizrt Content Pilot
41
Production Tech Resume Examples & Samples
- Production or manufacturing experience
- Ability to work 12 hour shift
- Mechanical ability is a plus
42
Production Tech Iiib-small Products Resume Examples & Samples
- Reviews production work orders to determine type of product to be run, sequence of operations and any special requirements
- Reviews bill of materials to determine tooling required to run production efficiently. Secures required tooling from Tooling Readiness Center or Tool Crib
- Secures copy of blueprint to confirm dimensional data of parts to be produced
- Uses handtools to remove parts from machines used in prior production runs
- Uses hand tools, clamps, lock bolts and other items to arrange cutters, quills, punches, dies and associated parts in the proper relationship to each other to produce parts as detailed on blueprints
- Adjusts wire drawing machine to accept raw material stock and draw wire down to dimension required to feed properly into cold header machine
- Adjusts feed roller, setting stroke to produce parts of the required dimensions
- Operates machine after set-up, producing first pieces to confirm that cold header and roller are properly set up. If needed, modifies set-up until proper product characteristics are achieved
- Performs further quality checks after machine is warmed up and makes final machine adjustments
- Performs Statistical Process Control (SPC) checks on parts at a minimum of every two hours to confirm compliance with specifications. Analyzes SPC charts to identify and correct out-of-control processes
- Utilizes catch pan to segregate parts currently being produced from main tub. Measures parts in catch pan to determine conformance to specifications. Segregates non-conforming product for disposition
- Changes raw material feedstock as needed to ensure that machine downtime is minimized
- Performs machine inspections and conduct preventive maintenance, which may include changing oil, greasing lubrication points and making routine adjustments to machine mechanisms
- Completes required paperwork and makes entries in to shop floor computer systems. Verifies accuracy of all data recorded and entered
- Orders and maintains an inventory of required tooling, gages and supplies to maximize machine uptime
- Participates in setting and achieving team and individual productivity and quality targets
- Seeks to continuously improve safety, quality and productivity in areas of responsibility
- Performs shop floor housekeeping duties to maintain a neat and orderly work area
- Trains other machine operators as required
- Ensures that all work activities are performed in accordance with established safety and environmental standards
43
Production Tech Resume Examples & Samples
- Bachelor’s degree (Journalism, Communications or Business preferred) or its equivalent
- Minimum of 3-5 years experience in a live television environment
- Excellent verbal and written communications skills with the ability to relate with sensitivity to the unique needs and problems of a 24-hour operation with critical deadlines
- Must have strong desire to continually increase technical and operational proficiency
- Willing to work in a team environment on an as needed basis
- Will be required to wear a headset and listen to multiple audio sources during the on-air show
44
Production Tech Resume Examples & Samples
- Prepare meeting information for all area supervisors
- Prepare and distribute meeting notes for Superintendent. (Presently be performed by engineering tech or EHS tech.)
- Files and retrieves field operations data
- Maintains daily, weekly and monthly reports
- Take ownership and manages the South Texas Operations shared drive
- Supports supervisors in ensuring all paperwork is filed and accurate
- Assist Superintendent with Spotfire and Carte reports and distributes to supervisors for review
- Will be responsible for the design and management of all spreadsheets and graphs
- Supports supervisors with reports generated from field lease operators
- Tracks and graphs daily production trends for oil and gas and files same electronically (dispatch specific)
- Reviews monthly reports for missing information and field personnel to ensure data accuracy for electronic loading
- Locates, retrieves, exchange, and codes well, field and log data
- May assist in training of Production staff on use of required software, such as Siteview/Wellview, Carte, and Pelaton
- Other related duties as requested
45
Production Tech Resume Examples & Samples
- Assembles and tests individual sub-assemblies often under a stereo microscope
- Performs complex component placement and alignment using bonding and curing procedures while referencing work instructions and mechanical drawings
- Operates test equipment, instruments and input of the performance data into computer files, folders and spreadsheets
- Perform PCB inspection, soldering and rework. Programming and loading of firmware onto boards for production use
- Performs precision cleaning and preparation of components for assembly / usage in subsystems or end product
- Inspects and verifies that work is complete and correct, with capture on associated files or documentation
- 5 years with a proven track record in an electronics or electro-optical manufacturing environment
- Discipline to follow written and/or verbal instructions
- Computer skills including MS Office software and company network navigation
- Meticulous attention to detail involving a high level of concentration
- Excellent visual acuity and manual dexterity
- Comfortable working on mm sized components under a microscope often sitting for extended periods
- Ability to perform with minimal supervision
- Strong team player, winning attitude, and a desire to work in a team environment
- A.S. degree preferred
- Familiarity with clean room procedures and protocols, comfortable working in cleanroom attire
- IPC J-STD-001 or equivalent soldering certification
46
General Help-pace Dairy Foods rd Shift Production Tech Resume Examples & Samples
- Ensure all chemicals, buckets and pumps are properly tagged according to safety requirements
- Assist in hand-packing and hand-stacking product/cases onto pallets
- Ability to meet deadlines with limited supervision
47
Production Tech Resume Examples & Samples
- Must be able to read and use appropriate test gages and perform required tests on applicable valves according to company standards
- Visually inspects all parts and materials prior to and after testing for nicks, blemishes and defects
- Will perform all testing using required safety guidelines including wearing appropriate personal protective equipment i.e., safety glasses with side shields, steel toed safety shoes, gloves, (apron for steam testing) and hearing protection
48
Associate Production Tech Resume Examples & Samples
- Minimum of 2 years experience in a live television environment
- Must be a self-starter and be able to work independently
- Must be able to work in a multitasking environment
- Highly proficient with MS Office applications, Google software applications and other software used by Production Operations team
49
Production Tech-pharm Resume Examples & Samples
- Formulate LOCI Reagents
- Operate the Vista and DM ExL instruments to perform testing of LOCI products
- Perform data entry into LIMS
- Works with Technical Operations to troubleshoot any production issues
- Manufacture and test materials to support new product development, product and process improvements, and stabilization of supply such as new vendor materials
- Identifies problems as they occur and takes appropriate steps to solve them
- Elevates issues that could impact supply chain
- Assists in reviewing and upgrading written protocols
- Perform verifications and maintenance of equipment
- BS/BA required
- A minimum of 2 years of successful experience in a manufacturing environment and successful demonstration of key responsibilities and knowledge as presented above
- Good interpersonal skills to work successfully in a team environment and also have the ability to work independently
- Strong laboratory skills, good organization skills and the ability to work in a fast-paced environment are essential
- Work involves potentially biohazardous materials
- Knowledge of and prior use of Microsoft Office programs
50
Blind Bolt Production Tech Resume Examples & Samples
- Support set-up and operation of equipment, as assigned
- Maintain inventory accuracy and control of material stores
- Complete forms or computer entries as required
- Participate in achieving team and individual productivity and quality targets
- Participate with team in continuous improvement efforts
- Perform shop floor and raw material warehouse housekeeping duties
- Maintain charts to ensure sustainment of set-up reduction and OA improvements
- Ensure accuracy of raw material to maximize set-ups and runtime on equipment
- Helps to ensure that quality and standards for the department are adhered to and maintained
- Assumes other special activities and responsibilities from time to time as required
51
Production Tech Resume Examples & Samples
- Operates laser
- Operates vapor degreaser
- Operates magnetic finisher
- Performs device history record management (filling out routers correctly)
- Performs all PM on time
- GMP
- Mainframe computer
- Customer/service orientation
- Brand/industry understanding
- Operation and Control - Controlling operations of equipment or systems
- Problem Solving - Identifying problems and reviewing related information to develop and evaluate options and implement solutions
- Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making
- Attention to Detail - Job requires being careful about detail and thorough in completing work tasks
- Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations
- Adaptability/Flexibility - Job requires being open to change (positive or negative) and to considerable variety in the workplace
- Persistence - Job requires persistence in the face of obstacles
- Cooperation - Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude
- Initiative - Job requires a willingness to take on responsibilities and challenges
- Communication- written, verbal, and active listening
- Basic blueprint reading
52
Production Tech, Final Processing Resume Examples & Samples
- Non-sterile packaging using vision/barcode scanning equipment
- Sealing operations – blister or pouch
- Carton and shrink-wrap
- Create labels via controlled source computer software and label printers
- Perform preventive maintenance activities on department equipment
- Record data on Device History Records of production products
- Create Purchase Orders for vendor operations
- Proper disposal of remnants and other materials
- Perform any other necessary task that contributes to the flow of raw material, WIP, and finished goods throughout the shop floor
- High school or GED equivalent required
- 0-1 year manufacturing experience
- JDE and Microsoft applications preferred
53
Production Tech Resume Examples & Samples
- Makes Labels
- Adheres to proper disposal of all waste (alcohol, silicone, etc)
- Performs Silicone molding and post curing of implants / sizers
- Operates digital scales
- Performs Silicone milling, preparation of material
- Prepares sterile shipment (MSR, sterile shipment verification, product control, exception report)
- Operates Miele Washer - components, polys, etc
- Performs Hunter Tendon Manufacturing
- Final Inspection in SJO
- GMP training
- 3-5 years manufacturing experience
- Three to Five years SJO experience
- Gauges, calipers and micrometer experience / training
- Optical comparator experience / training
54
Production Tech-laporte, TX Resume Examples & Samples
- 1) Maintain all Safety, Quality, Environmental, and Compliance activities
- 2) Start up, shut down, and operate the production processes
- 3) Perform routine maintenance and calibrations on a variety of process equipment such as compressors, gas analyzers, control systems, electrical systems, rotating equipment, and process control valves
- 4) Troubleshoot and repair defective equipment, electrical components, and production processes
- 5) Planning and executing operations and maintenance tasks (e.g. lockout-tagout)
- 6) Follow SOPs/SMPs for highly regulated plant processes and procedures
- 7) Purchasing of materials and/or services such as contractors
- 8) Documentation, reports, and other administrative duties
- Use of air purifying full face respirator occasionally
- Use of chemical personal protective equipment (PPE)
- On Call, 24 hours, 7 days a week. Must carry cell Company Cell phone for immediate availability
- Air separation, oil refining, or similar complex process control operations
- Safety commitment and compliance with procedures
- Competency with computers, Microsoft applications (specifically Word and Excel), email, and process control computer systems
- Use of calibration devices and data collectors
- Maintenance and repairs of industrial equipment
- Process understanding, process control schematic interpretation
- Maintenance and compliance documentation
- Communications, both verbal and written
- Safe Work Planning
