Instrumentation Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the instrumentation technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

M Collins

Marquise

Collins

45135 Erin Shoal

Los Angeles

+1 (555) 843 5392

45135 Erin Shoal

Los Angeles

Phone

p +1 (555) 843 5392

Experience Experience

New York, NY

Instrumentation Technician

New York, NY

Runte, Roberts and Trantow

New York, NY

Instrumentation Technician

Perform any work, within the classification, which management may deem necessary
Works independently and make sound judgments regarding work methods and tools
Develop new techniques and applications that improve department efficiency
Provide support to both contract and non-contract customers and completion of all requisite administrative paperwork
Provides scheduling and for calibration vendors to ensure timely completion and quality of work for equipment/ instruments
Identifies errors in work and processes, promptly notifying Section Leader and Supervisor. Incumbent assists with the failure investigation
Develop working operational knowledge of equipment in assigned scope of responsibility (not simply functional knowledge related to maintenance)

Houston, TX

Application Instrumentation Technician

Houston, TX

Langworth, Johns and Glover

Houston, TX

Application Instrumentation Technician

Planning and prioritizing own workload and working on own initiative
Development of synthetic-transactions (script that emulates an end user working with an application)
Participation in identification of critical performance matrix for applications / services
Participation in the overall fine-tuning process and best practices / standards framework
Development of policies or monitors
Participation in meetings with development and application operations teams
Good working knowledge of Operating Systems (MS Windows, Linux, UNIX)

present

Chicago, IL

Senior Instrumentation Technician

Chicago, IL

Collins-Ward

present

Chicago, IL

Senior Instrumentation Technician

present

Strive every day to ensure any work undertaken personally or by co-workers is done with
Best practice for instrumentation developed within relevant legal and safety frameworks
Management of the equipment within the process control domain according to the prescribed key performance indicators from the process control department
Perform calibration and repair of advanced analytical instrumentation used in biopharmaceutical manufacturing processes and QC laboratories
Work in close proximity to hazardous chemicals, high and low temperature liquids, high pressure liquids and gasses, steam, and moving machinery/equipment
Perform complex configuration of the site’s instrumentation
Provide hands-on technical leadership for installation, start-up, and maintenance of state-of-the-art process control systems

Education Education

Bachelor’s Degree in Electronics

University of Illinois at Chicago

Bachelor’s Degree in Electronics

Skills Skills

Knowledgeable of low voltage distribution systems, DCS control system operation and configuration, PLC operation/programming, electrical/instrument control device settings and calibrations, reading and interpreting circuit and process and instrumentation diagrams, etc
Demonstrated commitment to the environment and safe work practices, with a continuous improvement mindset
Interpersonal communication and teamwork skills with a fundamental value for diversity, and a strong work ethic
You will be union-represented under USW 12-477
Maintain integrity and perform safe and efficient maintenance of all instrumentation and control systems and equipment in accordance with established procedures
Execute and communicate daily instrumentation maintenance activities
Respond quickly and effectively as requested to problems / breakdowns
Gather data in support of equipment condition monitoring
Plan and estimate safe, efficient and cost effective execution of jobs while minimizing the impact on operations and incurred costs
Actively participate in post-event failure analysis and root cause discussions and contribute to developing solutions

Create a Resume in Minutes

15 Instrumentation Technician resume templates

Read our complete resume writing guides

Instrumentation Technician Supervisor Resume Examples & Samples

Lead and supervise a staff of Instrumentation Technicians in the conduct of Test instrumentation
Supervise nonexempt and other employees within one or more platform teams
Provide hands on support to technicians
Perform Instrumentation Technician duties (build, installation, hardware management, planning and allocation of resources and materials)
Manage staffing profiles that meet the requirements of their respective Program(s) and the DFC site
Develop annual training/certification programs that meet the intent of the site/program needs and staff Individual Development Plans
Assist with the development of new standard work and the further refinement of existing Instrumentation Processes
Assist with the development of skill set matrix for direct staff and develop plans to close any identified skill gaps
Develop metrics to manage the efficiency of direct staff and identify opportunities for improvement
Supervisor may be directly involved in the performance of those tasks which are of a more complex nature
Engage staff in process improvement opportunities using ACE and Lean strategies to enhance quality and on-time delivery while reducing operational costs
Comply with and enforce compliance to EH&S policies to ensure employees work in a safe environment
Actively promote an ethics-based business culture in his/her group, ensuring that all associates are aware of and fully comply with UTC’s “Code of Ethics”
Report to Management conditions or practices that are either unsafe or that may adversely impact the environment, to ensure prompt resolution of potential hazards
Government Relations
Legal

Application Instrumentation Technician Resume Examples & Samples

Well defined analytical skills to conduct effective service request analysis so that key issues are properly identified, complex and conflicting issues are effectively negotiated and proper compliant and financially feasible solutions are provided
Takes an active role in building and advancing knowledge the core business service lines, the regional and global IT infrastructures and the proper performance of the global IT operating environment to support proper recognition of the impact of service disruption issues and to position improvement opportunities as part of Event Configuration’s technical support
Strong advanced interpersonal skills to adapt personal communication styles to the style of others. Uses advanced oral and written English communication skills to engage in cross business discussions within a matrixed, geographically dispersed organization, staying calm under pressure and maintaining the credibility the business has in ISM services
Projects well-defined consultative skill to conduct effective questioning to break down complex service requests into core elements, formulate appropriate ideas and negotiate those ideas clearly and concisely to advance a cooperative engagement by all levels of the organization
Advanced time management skills to prioritize workload and work through change requests with proper efficiency and guide others in same
Strong oral communication skills in the English language to work effectively with all levels of end users and IT personal
Advanced knowledge of the Service Now system to record incidents and remediation as well as guide others in features and functions
Working knowledge of the technical aspects of the current monitoring consoles in use for Alert Monitoring as well as the related functionality of each to recognize and align modifications as needed

Dynamometer Lab Instrumentation Technician Resume Examples & Samples

Conduct test cell calibration on equipment used in development, durability, mapping, transmission and emissions test rooms
Must have knowledge of general diesel and gasoline engine operation
Understand pressure, temperature, speed and torque measuring systems and controls
Understand and operate multiple computer systems (Compass, ADACS, Resol fuel cart, Pro-Link, Rotec, LMS) controlling data acquisition systems in real time
Should have knowledge of
3+ years of experience in troubleshooting, calibration and repair of specialized instrumentation and test cell infrastructure equipment as well as data acquisition and emission analyzers
Associate Degree, preferred
Skilled in oral and written technical communication

Application Instrumentation Technician Resume Examples & Samples

Participation in meetings with development and application operations teams
Participation in identification of critical event for applications / services
Participation in identification of critical performance matrix for applications / services
Participation in identification of critical application / service transactions
Development of policies or monitors
Development of scripts to be used in tool specific monitors / policies
Development of synthetic-transactions (script that emulates an end user working with an application)
Deployment of policies or monitors
Collect and document the Application Instrumentation requirements during the Application Instrumentation consulting meetings with the developer / application operations teams
Collect and document the scripted responses (instructions which steps are to be perform when an alert will be generated) during the Application Instrumentation consulting meetings with the developer / application operations teams
Independently develop application instrumentation policies and monitors based on the collected requirements collected during Application Instrumentation consulting meetings
Solid interpersonal, communication and organizational skills
Basic project management skills
Strong knowledge of Enterprise System Management tools, and up-to Subject Matter Expert knowledge in two tools
Good programming & scripting skills
Good knowledge of databases (MS SQL / Oracle)
Good knowledge of web based technologies (ie Web services, JAVA, .Net)
Good knowledge of application development
Good working knowledge of Operating Systems (MS Windows, Linux, UNIX)
English language skills – good written and verbal communication
Flexible Hours – due to the global nature of the role it may require the individual to attend calls either early or late in the day to accommodate colleagues in different time zones

Instrumentation Technician Resume Examples & Samples

Install, verify, document, and maintain sensors and data acquisition as required for vehicle and rig based tests; including accelerometers, potentiometers, pressure/force transducers, thermocouples, timing instruments, and strain gages
Operate cameras, computers, diagnostic equipment, electrical meters, hand tools, power tools; including tweezers, soldering iron, amp/ohm/volt meter, oscilloscope, and microscope
Complete projects independently from technical verbal/written instructions, schematics, or drawings with a readiness to complete tasks that are within ability
Assist in assembly, setup, operation, repair and maintenance of test equipment, vehicles, and rigs
Perform preventative, corrective, and emergency maintenance toward 100% data integrity
Support development/modifications/repair of DC circuit and signaling devices, prototype concepts, building wiring harnesses, and pin/de-pin connectors

Application Instrumentation Technician Resume Examples & Samples

Perform defined Housekeeping Tasks that are required to ensure the continued availability of ESM Monitoring tools(HP BSM,OML,SCOM etc)/Monitoring Agents(OM/SCOM)
Adhering to the EY defined operation and maintenance practices
Timely response to Incident tickets related to his/her primary/secondary tools/tasks
Addition/Configuration of new servers/devices to monitoring
Strong problem-solving skills and a high degree of self-motivation
Planning and prioritizing own workload and working on own initiative
Analytical approach to identifying issues and solutions
Ability to quickly acquire the knowledge you need for the task at hand
Self-managing and pro-active
Approximately 2-6 years of experience in technology support
Experience in HP Openview Tools/SCOM/HP Business Service Management Suite
Understanding of server, networking, backup and virtualization tools and concepts that they relate to monitoring
Good Knowledge/exposure to Windows/Linux
Strong problem solving ability

Dynamometer Lab Instrumentation Technician Resume Examples & Samples

Analyzers - Fast-FID, Fast-NOX, Fast-Co2 analyzers, Opacity Meter / Smoke Meter, CAS - combustion analyzer fundamentals of operation and calibration procedures
Interface with Test Development and Calibration Engineers to review test procedures, data review, and problem diagnosis
Troubleshoot test cell infrastructure and understand procedures related to calibration and repair
Ability to use oscilloscopes, digital multi-meters and other diagnostic equipment
Perform mechanical, electrical or electronic tasks related to repairs or test set up requirements
Familiarity with engine fuel, ignition, cooling, and A/C systems
Help commission new test facilities and equipment as needed
Participate in the development and implementation of new or modified test procedures and methods as needed
Conduct and monitor DQA/PQA checks and ensure calibration compliance
Use of schematics / prints for electro-mechanical, pneumatic, hydraulic and calibration systems
Familiarity of specialized test instrumentation such as pressure, temperature, speed and vibration sensors, strain gaging and their associated equipment
Flexible work schedule

Instrumentation Technician Lead Resume Examples & Samples

Perform Preventive, Corrective and Emergency maintenance on customer’s QCS equipment
Independently troubleshoot and solve system and process related problems
Basic working knowledge of tuning MD and CD loops
Write monthly system performance reports for assigned systems
Document results in writing to the customer
Possess/develop comprehensive knowledge of entire product and services portfolio and routinely consult with both customer and field sales force
Actively interface with customers at all levels
Ensures customer satisfaction through oral and written communication
5 years of QCS experience
3 years of Microsoft, PC, and networking abilities
Minimum 4 years experience in related electronics training
Possess skills required for problem resolution
Capable in performing preventive/reactive maintenance
Basic Electronics Training
Functional and working understanding of Honeywell QCS
Basic understanding of MD & CD controls
Pulp and Paper process skills
Capable of troubleshooting our equipment and customers
Capable of verifying and calibrating sensors as well as possessing a working knowledge of sensor operations and correctors
Knowledgeable of system architecture and operations as well as applicable database items needed for basic maintenance and calibration Qualification

Instrumentation Technician Resume Examples & Samples

Preventive, Corrective and Emergency maintenance of customer’s process control systems comprising Honeywell and competitive field products. The product mix defined as process instrument recorders, controllers, transmitters, reporters and scada systems
Troubleshoot and resolve process related problems \ Adherence to deliverable content defined by contract
Provide support to both contract and non-contract customers and completion of all requisite administrative paperwork
Develop growth opportunities for Honeywell LSS through demonstrated understanding of Honeywell solution set
This role will require 50% travel to various customer sites. Client sites are local so no overnight stays will be required
Associates Degree and 2 years minimum Instrumentation /Electronics experience OR in lieu of degree 4 years of Instrumentation / Electronics experience
Process Control experience with process control field products and control systems
Capable of developing new PMS for existing and new products as knowledge is required
Design/Engineer solutions to prevent reoccurring problems as knowledge is required
Project a positive and confident attitude focused on meeting and exceeding customer expectations

Instrumentation Technician / Journeyman Resume Examples & Samples

Installation, Repair, and Calibration of a variety of Transmitters and Instruments (Pressure,
Candidates for this position must successfully pass assessment tests and be in good standing
Journeyman in Electronic Instrumentation (equivalent education, training and experience considered)
Alternate skill set: Journeyman Electrician with electronic instrumentation/controls experience. (Equivalent experience and education considered)
Alternate skill set: HVAC Technician with automation/controls experience
Industrial Instrumentation background and experience
Experienced in DCS and PLC Hardware, Installation and Maintenance
Computer proficiency in software related to the instrumentation trade
Ability to work independently or as a team member
Experience or knowledge of Variable Speed Motor Drives and/or Pneumatic Instrumentation a plus
Take responsibility for own safety and work with minimal supervision
Response to off-shift emergencies, scheduled and unplanned overtime as required
No lifting or respirator restrictions

Instrumentation Technician Resume Examples & Samples

Perform calibrations, loop checking, troubleshooting, repairs, and start-ups on field devices
Respond to work orders, overtime situations and the needs of the refinery
Collaborate with the reliability technicians to troubleshoot problems on vibrating equipment
Identify opportunities to improve the reliability of the refinery’s equipment
Provide technical assistance to other instrument personnel to improve competency levels
Utilize charts and data to conduct analyses and properly diagnose rotating equipment failures
Conduct work effectively, using best practices, when obstacles prevent planned work from being conducted
Take decisive action when a quick response is required or under conditions of uncertainty
Associate's degree (or technical equivalent diploma) in the Instrument and Controls field or Electronics Technology
Or successful completion of a formal program in the field of Process Instrumentation through military service or crafts apprenticeship program and five years of recent practical experience (preferred) in maintenance of industrial instrumentation and controls equipment
Or ISA (formerly Instrument Society of America) CCST Certification Level I and practical experience (preferred) in maintenance of industrial instrumentation and controls equipment
Possess a valid driver’s licence with a driving record acceptable to Suncor
Knowledgeable of low voltage distribution systems, DCS control system operation and configuration, PLC operation/programming, electrical/instrument control device settings and calibrations, reading and interpreting circuit and process and instrumentation diagrams, etc
Demonstrated commitment to the environment and safe work practices, with a continuous improvement mindset
Interpersonal communication and teamwork skills with a fundamental value for diversity, and a strong work ethic

Instrumentation Technician Resume Examples & Samples

Maintain integrity and perform safe and efficient maintenance of all instrumentation and control systems and equipment in accordance with established procedures
Execute and communicate daily instrumentation maintenance activities
Respond quickly and effectively as requested to problems / breakdowns
Gather data in support of equipment condition monitoring
Plan and estimate safe, efficient and cost effective execution of jobs while minimizing the impact on operations and incurred costs
Actively participate in post-event failure analysis and root cause discussions and contribute to developing solutions
Ensure that preventative maintenance guidelines are adhered to and maintain complete and accurate records associated with the technical and preventative aspects of this position
Three or more years' post-apprenticeship experience working in the maintenance area within a heavy industrial environment (e.g. mining, oil and gas, pulp and paper, petrochemical, etc.)
Paraffinic Froth Treatment (PFT) experience is an asset
Valid Alberta Journeyman Instrumentation Technician Certificate or an Interprovincial Red Seal Journeyman Instrumentation Technician Certificate; attach your Journeyman / Red Seal ticket with your application in order to be considered
Two year technologist diploma is considered an asset
Ability to read and interpret equipment specifications, engineering drawings, blueprints, charts, and tables or study sample parts
In-depth knowledge and application of technical requirements and quality standards and a strong understanding of maintenance and operations
Familiar with computerized maintenance management systems
An exceptionally strong safety and environmental mindset, proven safety training, knowledge of the Occupational Health and Safety Act and environmental standards and guidelines
You continually seek greater knowledge about the systems, processes and hazards in the workplace in order to understand not just what you do but why you do it; a strong commitment to continuous improvement within safe work practices, procedures, and standards to ensure safe and reliable work execution
You constantly ask what could go wrong and check for out-of-the-ordinary conditions and learn to anticipate potential problems

Instrumentation Technician Resume Examples & Samples

Execute maintenance activities including installation, troubleshooting and repairs to industrial control systems and devices, ensuring quality, reliability and availability (equipment includes electrical safety systems, instrumentation associated with gas turbine generators, boilers, pumps, piping systems, tanks, pressure vessels, transformers, motors, medium-voltage variable frequency drives, and Programmable Logistics Codes (PLCs) for large industrial systems up to 13.8KV)
Follow strict electrical safe work practices as defined by our Suncor standards, the Canadian Electrical Code (CEC) and Z462 standard
Perform hands-on commissioning and startup of utilities systems, including construction walk downs
Participate actively in post-event failure analysis and root cause discussions and contribute to developing sound, cost-effective solutions
Ensure that preventative maintenance standards and guidelines are adhered to for all work
Assist in maintaining complete and accurate records associated with technical issues and preventative maintenance aspects of this position
Review and apply a continuous improvement mindset to safe work practices, procedures and standards to ensure safe and reliable work execution
Maintain clear and concise field notes to be logged and passed onto other parties
Five or more years of post-apprenticeship maintenance experience working in a heavy industrial process environment involving power generation and/or fluid systems; specific experience with Fisher Control Valves and Rosemount transmitters is required
Commissioning and startup experience is considered an asset
Valid Alberta Journeyman Certificate or an Interprovincial Red Seal Journeyman Certificate in the Instrumentation trade; attach your Journeyman / Red Seal ticket with your application to be considered
In-depth knowledge and application of technical requirements and quality standards
Strong understanding of maintenance and operations and the ability to work in a multi-skilled environment
Proficient in reading and interpreting equipment specifications, equipment manuals, engineering drawings (especially single-line drawings), and equipment data sheets
Strong working knowledge of computerized maintenance management systems
Proven strong safety and environmentally-conscious mindset
You collaborate effectively with Operations and other trades in order to achieve the best results and deliver the most value
You continually seek greater knowledge about the systems, processes and hazards in the workplace, in order to understand not just what you do but why you do it

Instrumentation Technician Resume Examples & Samples

Installs and/or supervises installation of instrumentation equipment on various participant platforms
Fabricates unique power and RF interfaces to allow installation and operation of LATR PIP and/or Iridium assemblies for non-standard exercise participant platforms
Maintains asset control on all Instrumentation equipment, and completes DD1149s for equipment issue
Provides technical support to visiting engineers
Assist Instrumentation and Pod Systems Manager in administrative duties as required
TCTS/LATR Umbilical re-build
TCTS/LATR Hanger removal and replacement
Equipment delivery, travel to delivery points
Flightline/Equipment support during exercises at remote locations
May assist in equipment installation
Completes DD1149’s for equipment issue

Instrumentation Technician Specialist Resume Examples & Samples

Associates degree in Electronics or equivalent education or experience
Should have strong electrical and mechanical background for troubleshooting and repair
Fluent in Microsoft Windows and Microsoft Office
Minimum three years experience in troubleshooting and repairing electro-mechanical instruments
Experience in dealing directly with customers
Excellent problem solving and trouble-shooting ability as well as good verbal and written communication skills
Good organizational skills to handle multiple tasks and deadlines
Individual must be self-motivated and disciplined with good organizational and time management skills. Must also have a positive attitude towards change

Instrumentation Technician Resume Examples & Samples

Install, calibrate, trouble-shoot and maintain process instrumentation, communication networks and control equipment including flow computers, tank gauging systems, custody transfer metering and associated equipment
Trouble-shoot electrical circuits, communication networks and control equipment and associated schematics, files and as-built drawings
Supports programming and troubleshooting of Local Operator Interfaces and Programmable Logic Controllers
Provide Instrumentation support and maintenance to ensure system reliability
Analyze, interpret and utilize graphic and other information contained in SCADA displays and P&ID drawings
Support Emergency Response initiatives and program
Provide Operational support to ensure throughput and system reliability

Calibration & Instrumentation Technician Resume Examples & Samples

45% - Performs tooling and measuring and test equipment (M&TE) gauge calibrations on all measuring and test equipment including electronic equipment and systems
15% - Manages tooling and gauge calibration program
10% - Performs troubleshooting, maintenance and repairs of M&TE
5% - Under close supervision, operates and programs coordinate measuring machine (CMM) and manages such calibration programs
5% - Assists with the development of computer, electronic and test system programs
5% - Prepares calibration instructions and methods in accordance with M&TE specifications, drawings and standards
5% - Assists with the development of program information files including calibration records, inventory, recall periods and history
5% - Coordinates the calibrations of M&TE including standards and government equipment by outside sources
5% - Assists Engineering in the design of tooling and selection of M&TE for development and continuous improvement. Assists Engineers in obtaining variable methodology data for the purpose of development cost reduction, failure analysis, test data, etc

Avionics & Instrumentation Technician Resume Examples & Samples

Must be able to read/interpret engineering drawings, blueprints and maintenance instructions
Proficient in wafer and hot air soldering
Working level of knowledge of Maintenance Information Systems such as Electronic Maintenance Instructions, Aircraft Forms Documentation, and Supply Chain Management
Must be knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs
Possess an ability to work in a diverse work culture environment
Must have or be able to obtain a Secret Security Clearance
5-7 years broad hands-on working experience in a 5 or 7 skill level USAF AFSC, Navy NEC, or Marine MOS avionics discipline or equivalent commercial experience such an FAA instrumentation license

Instrumentation Technician Resume Examples & Samples

Core tasks include day to day calibration and repair of basic electronic systems related to test equipment
Accurate and timely completion of instrumentation calibrations, repairs, and builds
Accurate documentation and database entry on a daily basis
Plan calibration schedule and facilitate communication with OPS
Calibrate pressure transducers, transmitters, load cells, temperature transmitters, gas analyzers and handheld/bench top test instruments such as multimeters, process calibrators, thermometers, etc…
Maintain instrumentation equipment, in a state of readiness, to support test programs
Operational test support through troubleshooting and root cause analysis
Ability to work independently, be highly organized, self-motivated with the ability to adapt to an ever changing work environment
Ability to think through a situation and see the “big picture”. How do your actions affect the client, fellow employees, and data deliverables
2 years of experience working with instrumentation
Associates Degree in electrical, controls, or electronics engineering is a plus
Technical understanding of data acquisition and instrumentation interface / communication
Operational knowledge of instrumentation equipment related to test systems
Must be able to read and interpret technical literature, manufacturers specifications, and calibration certifications
Ability to develop and interpret reports and calibration metrics
Experience with computer based database applications
Positive attitude and strong desire to excel

Instrumentation Technician Resume Examples & Samples

This positions is responsible for technical planning, system hardware-software-network design, development and integration, verification and validation, and fielding fielding. Evaluates alternatives including cost and risk, supportability alternatives including cost and risk, supportability and analyses for total systems. Duties include performing systems requirements analysis, functional analysis systems requirements analysis, functional analysis, timeline
Two years’ related experience, one year experience with bachelor’s
Capability to lift 40 lbs
Climb ladders to install instrumentation/communication assets
Ability to become certified in tower climbing

Instrumentation Technician Resume Examples & Samples

Troubleshoot and solve system and process related problems
Associates Degree or in lieu of degree 1 year experience in electronics background or military background
2 years of experience on one of the following platforms: DaVinci or ProLine
Capable of developing new PMS for existing and new products as knowledge is acquired
Knowledgeable of system architecture and operations as well as applicable database items needed for basic maintenance and calibration

Instrumentation Technician Resume Examples & Samples

Maintains a safe work environment; work in a safe manner following all safety SOP's; always wear personal protective equipment as required
Understands and performs analog, digital, frequency, and time calibration of electronic systems and components; understand the basic process and control theory of each critical system
Operates and maintains electric testing, repair, and calibration equipment. Reviews and updates department SOPs for enhancements and accuracy
Works independently and make sound judgments regarding work methods and tools
Reads wiring diagrams, blueprints and P&ID drawings
Installs new equipment, or work together with outside contractors on new installations
Calibrates, maintains, troubleshoots and performs repairs to electrical and instrumentation systems; Temperature/Pressure chart recorders, conductivity meters, thermometers, electronic scales, flow, analytical, level and pressure/vacuum/differential pressure instruments; work on the critical equipment such as autoclaves, bioreactors, ovens, automated washer lines. Replaces and repairs electronic and pneumatic sub-assemblies, integrated circuits, relays, and micro processing chips
Schedules and manages vendor performed preventative maintenance, calibrations and repairs
Plans and schedules Corrective Maintenance, Preventive Maintenance, and Calibration Work Orders; prepares and maintains accurate records and reports
Responds to emergency call-outs on nights, weekends and holidays
High School diploma with typically 4+ years relevant experience
Working knowledge of Computerized Maintenance Management Systems (CMMS)
Working knowledge of facilities equipment and preventive maintenance programs
Working knowledge of Metrology and calibration programs
Self-starter with the ability to work with minimal supervision
Excellent verbal and written communication skills. Communicates effectively orally, face-to-face, in a group settings; understand oral and written instructions
Ability to multitask and exercise good judgment
Ability to work in a fast-paced environment and maintain a high-level of customer service
Detail-oriented with good follow-up skills
Proficient in computer usage with standard business software

Instrumentation Technician Resume Examples & Samples

Responsibilities include technical understanding of basic troubleshooting skills of electrical and pneumatic instrumentation
Perform installations and/or work with Engineering, Maintenance, Process Control, or outside contractors on new installations and modifications
Understand and perform calibrations on Temperature, Pressure, Conductivity , UV, Balances, Scales, Vacuum, pH, CL2, ORP, Timers, RPM, Liquid/Gas Flow, and Gas detector instrumentation ect…
Operate and maintain testing, repair, and calibration equipment
Initiate corrective action to ensure potentially hazard situations are avoided and safety standards are maintained relative to production or facilities
Ability to identify like for like or like in function instrumentation
Must be able to work independently and make sound judgments regarding work methods and tools
Must be able to read wiring diagrams, loop drawings and P&ID drawings
Must have the ability to correctly complete high school-level mathematics
Employee maybe required to manage hazardous wastes in compliance with company procedures & State/Federal/Local hazardous waste regulations. Duties may include: Identifying, handling, generating, accumulating, storing, labeling, and on-site transporting of hazardous wastes
Must be able to navigate, conduct searches, and fill on line forms on Personal Computer for the purposes of training, performance management, and self service applications
Good interpersonal skills and be able to work effectively and efficiently in a team environment
Passion for Improving Lives. Must be able to put our patients at the center of everything we do
Engaged with the World Around Us. Must be able to embrace change and seek diverse perspectives and partnerships to benefit patients and make a positive impact on the world

Instrumentation Technician Resume Examples & Samples

Fabricating, programing and bench testing data logging and telemetry systems
Installing geotechnical instrumentation, data logging and telemetry systems
Carrying out data processing, web presentation and ongoing system maintenance both remotely and on site
Delivering proposals and installation reports
Client interface and relationship management
Ensuring our health and safety culture is upheld and actively encouraging safety awareness and environmental responsibility at all times

Instrumentation Technician Resume Examples & Samples

Calibrate, maintain, troubleshoot and repair engine test equipment such as temperature, pressure and flow instrumentation, emissions equipment, fuel metering equipment, oil consumption equipment, and dynamometers
Installation and cabling of various test cell data acquisition equipment
Wiring harness troubleshooting, repair and assembly
Planning, scheduling and tracking of calibrations and preventative maintenance, along with the ordering of parts and supplies, with guidance from senior staff
Flexibility, initiative and the willingness to respond to shifting time and project demands
Perform duties safely and efficiently
AA degree in Instrumentation Technology or equivalent
Two or more years relevant work experience
Applicants with the understanding of sophisticated test cell control systems and emissions testing equipment are highly sought after
Must be able to work independently as well as in a team environment
Must be self-directed with the ability to manage personal workload

Instrumentation Technician Resume Examples & Samples

Install, maintain, troubleshoot and repair a wide spectrum of instrumentation including many types of process analyzers, a wide range of process control equipment and an advanced automation (TDC / PLC) control system
Maintain, test and ensure functionality of refinery safety instrumented systems (SIS) and associated emergency shutdown (ESD) equipment
Implement preventative and predictive programs/assignments for instrumentation systems
Participate in failure analysis discussions
Maintain equipment histories as required
Plan jobs, including assessment and selection of material
Work effectively in a flexible team environment and promote the development, growth and overall effectiveness of the team and team members
Work closely with other maintenance and/or production technicians as required to ensure equipment/plant reliability
Three or more years of experience with analyzers and/or advanced process control systems in a large industrial facility
Preference will be given to candidates with a diploma in Instrumentation Technology
Journeyman Instrumentation Technician; attach your journeyman / red seal ticket with your application in order to be considered
Strong safety mindset with demonstrated safe work practices and knowledge of Workplace Hazardous Materials Information System (WHMIS) and Occupational Health and Safety (OH&S) regulations
Strong administrative skills with computer knowledge in SAP and Microsoft Office applications
Demonstrated analytical, troubleshooting, communication and decision making skills
You hold others accountable, and expect others to do the same

Instrumentation Technician Resume Examples & Samples

Performs testing, troubleshooting, calibration, and repair of all unit instrumentation and control systems as planned, scheduled and assigned
Performs preventive and predictive maintenance activities, and recommends updates as required
Performs general administrative tasks such as: acquiring job permits from operations, accessing and printing daily schedules from SAP, entering work history and closing work orders in SAP, entering time in SAP, acquiring PM task list, accessing information from plant pipe specifications, and producing simple job plans
Works with outside vendors and/or contractors to acquire necessary information on installation, operation, and repair of instrumentation and control systems
Assists in delivering training programs and operating instructions to maintenance, engineering, and production personnel as required
Assists in maintaining instrumentation parts inventories adequate for the operating unit
Reviews manufacturers instruction books, trade papers, etc. Attends and participates in such training or professional group conventions, conferences, training seminars, and meetings as may be approved to maintain skills and keep abreast of constant changes in the field
Performs as technical leader during periods of process upsets during diagnosis of problems
Provides detailed description of work performed and parts used for equipment maintenance records
Contributes to proper documentation of files, records, databases, and drawings to meet regulatory and BASF requirements, and complies with current requirements as to equipment/materials specifications and vendor preferences
Seeks compliance with all environmental, safety, and health requirements, and promotes a safe working environment
May fill in as team leader or planner on a temporary basis due to their absence or special situations
Related duties as assigned

Instrumentation Technician Resume Examples & Samples

In-depth knowledge of furnace deck operations, process utilities and controls
Ability to read and understand P&IDs and Electrical Cabinet Drawings
Instrument and transmitter calibration experience
Be able to work with different types of communication protocols. Field-bus, Profibus, Asi-bus preferred
Have a working knowledge of computer / control system networking
Must be able to use, maintain and calibrate instrumentation through the use of ProCal and AMS (Asset Management System)
Commitment to maintaining current knowledge of control systems and upgrades
Contractor management and oversight experience

Instrumentation Technician Resume Examples & Samples

At least one or more of the following
Experience commissioning DCS’s (Digital Control Systems)
Experience working with pneumatic & hydraulic systems
Experience with systems integration, instrumentation, networking, and communication
Experience troubleshooting and/or installing Fisher and Dezurik valves

Instrumentation Technician Resume Examples & Samples

Perform installation and modifications, or work together with Engineering, Maintenance, Process Control, or outside contractors on new installations and modifications
Understand the operation, maintain, modify, and high level troubleshooting of Steam sterilizers (Autoclaves)
Ability to spec out like for like or like non like for like instrumentation, to meet manufacturing process requirements
Expected to demonstrate the skills and knowledge of an Instrumentation Technician III
Perform Planning and Scheduling for routine and Non-routine calibrations for their assigned area
The Metrology Lead must work together to coordinate workload and workflow to determine appropriate resource on a daily basis. In addition, similar Planning and Scheduling process applies to the JDE System for managing corrective work order, and routine preventive maintenance of Autoclaves
Review and approve Calibration Reports and Instrument Status Update Report
Ownership of Change Control Process (CNs) within the assigned area. Ensure CNs is being manage effectively and timely completion
May perform other duties as assigned.
Good computer skills, knowledge of Microsoft Word and Excel
Skilled craft training/apprenticeship certificate or commensurate combination of technical education and experience
7-10 years in Process Instrumentation/Calibration. Experience in pharmaceutical manufacturing environment or equivalent industry
2 year technical/AA/AS degree in metrology, instrumentation, electronics, or related technical discipline

Senior Instrumentation Technician Resume Examples & Samples

Perform calibration and repair of advanced analytical instrumentation used in biopharmaceutical manufacturing processes and QC laboratories
Perform diagnostics, repairs, and modifications of advanced industrial process control instrumentation
Implement corrective and preventative actions pertaining to analytical and process instrumentation issues that directly impact manufacturing systems availability
Respond to trouble calls and provide immediate response to ensure maximum manufacturing system availability to the end-user
Provide hands-on technical leadership for installation, start-up, and maintenance of state-of-the-art process control systems
Prepare comprehensive calibration procedures/job plans and associated training materials for advanced analytical instrumentation and processes
Prepare and organize technical documentation and operational procedures from equipment manufacturers, equipment users, and engineering personnel
Assist engineering department during evaluation of new or modified instrumentation and process control systems
Inspect new instrumentation installations by contractors and affect necessary changes to comply with established departmental standards
Assist with identification, purchase, and organization of spare parts
Interact closely with scientists, engineers, production staff, and QA staff
Represent Facility Services Department during factory acceptance testing (FAT) of equipment to be supported, maintained, or calibrated
Provide technical expertise and training to in-house and contracted technical staff

Instrumentation Technician Resume Examples & Samples

Execute maintenance activities including installation, troubleshooting and repairs to industrial control systems and devices, ensuring quality, reliability and availability (equipment includes electrical safety systems, instrumentation associated with gas turbine generators, boilers, pumps, piping systems, tanks, pressure vessels, transformers, motors, medium-voltage variable frequency drives, and Programmable Logic Controllers (PLCs) for large industrial systems up to 13.8KV)
Two to five years of post-apprenticeship maintenance experience working in a heavy industrial process environment involving power generation and/or fluid systems
Experience with Fisher Control Valves and Rosemount transmitters
Commissioning and startup experience is an asset
Two year technologist diploma is an asset
High school diploma or General Education Diploma (GED)
Proficiency in reading and interpreting equipment specifications, equipment manuals, engineering drawings (especially single-line drawings and Piping & Instrumentation Drawings), and equipment data sheets
You collaborate effectively with operations and other trades in order to achieve the best results and deliver the most value

Instrumentation Technician Resume Examples & Samples

Three or more years of post-apprenticeship experience working in the maintenance area in a heavy industrial environment (e.g. mining, oil and gas, pulp and paper, petrochemical, etc.)
Valid Alberta Journeyperson Instrumentation Technician Certificate or an Interprovincial Red Seal Journeyman Instrumentation Technician Certificate; attach your journeyman / red seal ticket with your application in order to be considered
Ability to read and interpret equipment specifications, engineering drawings, blueprints, charts, and tables or study sample parts as required
Ability to install and bend tubing and have an understanding of troubleshooting instrument issues

Instrumentation Technician Resume Examples & Samples

Respond quickly and effectively to problems and/or breakdowns
Three or more years of post-apprenticeship experience working in the maintenance area of a heavy industrial environment (e.g. mining, oil and gas, pulp and paper, petrochemical, etc.)
Primary extraction (ore preparation plant (OPP) facilities, extraction and tailings) experience
Valid Alberta Instrumentation Technician Journeyman Certificate or an Interprovincial Red Seal Journeyman Certificate; attach your journeyman / red seal ticket with your application in order to be considered
Ability to read and interpret equipment specifications, engineering drawings, blueprints, charts, and tables, or study sample parts as required
An exceptionally strong safety and environmental mindset and proven safety training, knowledge of the Occupational Health and Safety Act and environmental standards and guidelines
You continually seek greater knowledge about the systems, processes and hazards in the workplace, in order to understand not just what you do but why you do it; a strong commitment to continuous improvement within safe work practices, procedures, and standards to ensure safe and reliable work execution

Instrumentation Technician Resume Examples & Samples

Support, troubleshoot and maintain a variety of control systems. Including, a Honeywell Distributed Control System
Provides Instrumentation / Controls support to Manufacturing and Engineering
Maintains Documentation, revision control and backups for plant control systems
Diagnose, repair and replace components in the plant’s control systems including electronics, valves, wiring and pneumatics
Establish and support plant Preventative Maintenance System using Maximo MMIS
Assist Engineering in plant design, modifications and hazard analyses
Comply with all plant safety rules, attend safety meetings, and actively support and participate in safety and spill prevention
Degree or equivalent experience in Electrical or Instrumentation Engineering is required
Five years’ experience in an industrial setting required, chemical manufacturing preferred
Experience with Distributed Controls Systems, PLCs and pneumatics required. Honeywell DCS experience a plus
High level of mechanical aptitude, troubleshooting skills required
Excellent communications skills and an ability to work effectively in a team environment
Commitment to safety as demonstrated by experience in leading or participating in company safety committees or other safety-related activities is highly desired

Instrumentation Technician Resume Examples & Samples

Perform Configuration, Implementation, as well as Preventative, Corrective and Emergency maintenance on customer’s Quality Control Systems (QCS)
Actively interface with customers at all levels. Ensures customer satisfaction through oral and written communication
Be willing to provide 7 X 24 emergency support to area customers
Pro-actively looks to build cross discipline experience and increase knowledge through working with other engineers and technicians
Assist manager as required
40 Hours a week with overtime available
Training provided
Three man site, maintaining Honeywell Quality Control Equipment
24x7 Call Coverage, three man rotation weekend call
Technical degree or equivalent years of experience with electronic or IT background
2 years of Computer and PC experience. Software skills including Microsoft Office Suite, Access, PowerPoint, and shows sound knowledge of a Microsoft networked desktop environment, and demonstrates interest and capability of keeping skill set current with changing technology
Effective written and verbal skill to enable strong communication capabilities
Must be well organized and able to manage multiple projects and tasks concurrently
Customer relations skills required, must be able to deal with people well
Diagnostic and analytical skills including problem solving, trouble shooting, management of priorities and self-direction to resolve complex issues
Basic knowledge of process control theory and/or process technology for continuous processes
Distributed Control Systems Implementation/Maintenance experience
Experience with Electrical troubleshooting techniques
Knowledge of concepts of Process Control High level of skills required for problem resolution
Capable of performing preventative/corrective maintenance
Effective communicator (written and oral); ability to communicate at several different levels within the organization
Ability to influence without authority
Paper process knowledge

Instrumentation Technician Resume Examples & Samples

BA/BS degree in a laboratory science
2-3 years experience working with analytical instrumentation in a regulated laboratory
Understanding of GMP/GLP regulations and requirements
Proficiency with several types of laboratory instrumentation
Service mentality

Calibration / Instrumentation Technician Resume Examples & Samples

Perform calibration and adjustment of facility and production instrumentation utilizing Computerized Maintenance Management System (Infor10 EAM system) to ensure systems are operating at validated standards
Assist with development of new calibration methods, Standard Operating Procedures and procurement of appropriate standards
Identify and correct safety hazards and assist with creation of equipment specific LOTO procedures
Assist with troubleshooting of production and facility equipment
Repairing and maintaining Building Automation Control Systems, HVAC controls and networks, production equipment, computer based controls, electronic instrumentation and programmable logic controllers
Provide technical support to equipment / facility related validations as required
Plan and prioritize project/activities (work orders, daily work, site coverage) in a constantly changing environment and create contingency plans to maximize production time and meet unexpected needs
Project management skills to individually implement small projects or support projects related to facilities and equipment
Use a variety of computer software, including Microsoft Office, to generate reports as necessary
High School diploma or General Education Degree with a minimum of 5 years working experience in a electrical/controls, or instrumentation/controls field in a production environment
Must possess an understanding of calibration methods and standards
Strong electrical, mechanical, automation and motor control skills
Ability to interact with skilled craft personnel and possesses basic knowledge of their technical expertise
Ability to read and understand blue prints, ladder logic
Working experience with various PLCs, PC based operator interfaces (Visual Basic, Allen Bradley, iFix, Wonderware, Iconics) VFD’s, and Servo controls is preferred, but not required
Working experience with AutoCAD is desirable
Ability to provide timely feedback to Management and customers regarding work, procedures, schedules, etc
Ability to establish and maintain good working relationships with internal and external customers
Responsible for completing work assignments in a timely manner to the satisfaction of the requesting department
Responsible for identifying any necessary tools, equipment, procedures, spare parts, etc. required to perform routine work requests

Instrumentation Technician Resume Examples & Samples

Comply with all company and plant rules. Participate in plant safety initiatives and continuous improvement activities
Maintain equipment in assigned scope of responsibility
Responsible for safety, product quality and productivity in assigned scope of responsibility
Perform all assigned preventative maintenance tasks, including activities as assigned during plant shutdowns
Develop preventive maintenance procedures as required
Make repairs on equipment breakdowns as required
Assist in the execution of changeovers in assigned scope of responsibility
Initiate, document, and complete all work in the plant’s CMMS (SAP) system
Support the continuous improvement process (e.g.: serve on improvement teams as nominated)
Assist other maintenance teams in the performance of emergency repairs as required
Provide overtime coverage within the department as required
Support Plant / Department TPM requirements
Assist in the training of fellow co-workers as required (within the department and also operators, maintenance personnel, or others plant wide)
Replaces machine parts working to tolerances of ±0.002 inches
Must be skilled with common hand tools and have a general understanding of measuring tools and systems (English and Metric)
Develop working operational knowledge of equipment in assigned scope of responsibility (not simply functional knowledge related to maintenance)
Self-motivated and capable of working in a group environment
Complete all other assigned duties
Report unsafe conditions, correct if possible
All job functions are to be performed in compliance with the plant’s safety & quality assurance programs
Electrical Journeyman’s Card (or higher) or demonstrable competence for electrical work
Ability to read understand, and use electrical blueprints, diagrams, and schematics
Skill and experience within Factory Automation Systems (PLC’s, Motion Control (servos), Motor Drive Systems, Process Instrumentation, Etc.)
Perform all work in compliance with plant lockout / tag-out procedures
Knowledge and proper use of all equipment necessary to performing the assigned job
Familiarity with hand tools & precision measurement gauges
Must be able to learn independently (e.g.: must be able to read and understand technical manuals and apply on the job)
Completion of initial E&I Tech screening and assessments

Controls & Instrumentation Technician Resume Examples & Samples

Participate in installing all instrumentation and electrical components safely
Run conduit, pull wire, replacement of motors and basic motor controls
Install, troubleshoot and maintain end devices, alarms, shutdown systems, process controls, variable frequency drives, air/fuel controllers, panel boards, etc
Perform preventative and general maintenance on electronic equipment and parts associated with this equipment
Provide training and technical support
Completion of AAS in Technical Curriculum or Technical Trade School desired
15+ years’ experience with process instrumentation and controls
Ability to work under minimal supervision to complete projects safely and efficiently, and with a high degree of accuracy
Possesses a knowledge of electric motors and their installation. Person should have a knowledge of all drives and their operation
Strong PLC programming and troubleshooting abilities
The ability to read at a level to understand written safety procedures, work procedures, blue prints, P&IDs, work permits, and technical instruction manuals is required
Thorough knowledge of electrical codes and exceptional AC/DC troubleshooting skills
Must fully understand all computers / software and hardware devices such as Micro Soft Office, Excel and industrial applications Such as RS Links, FX Developer

Instrumentation Technician Resume Examples & Samples

Perform daily and scheduled preventative maintenance calibrations of instruments including troubleshooting and repair
Responsible for calibrations, adjustments, replacement and repair to process and test equipment per Grifols Biologicals Inc.’s (GBI) Calibration Standard Procedures (CSP) following all applicable safety practices
Update Calibration Data Sheets
Develop or update Calibration Standard Procedures
Use computers and or Advanced Maintenance Management System (AMMS) to gather information for analysis regarding calibrations
Must have minimum of High School diploma or GED
Trade school, Associates degree, or Military training in metrology or instrumentation related field is highly preferred
Minimum of 1 year hands on experience repairing, troubleshooting, and calibrating equipment in a commercial/industrial environment. Extensive knowledge and hands on experience in any type of instrumentation and calibration tools is preferred. Educational certificate or degree program in trade industry can be substituted for 1 year of experience
Knowledge of calibration, instrumentation, or metrology methods
Knowledge of pH meters, conductivity meters, ozone meters (temperature, RTD’s Thermocouples), indicators and controllers, pressure and vacuum devises, load cells, liquid flow and level indicators
Must have strong trouble shooting abilities to identify and resolve equipment problems
Able to repair, calibrate, install, and rebuild instruments
Able to use diagnostic test equipment and precision measuring devises
Able to read and understand electrical drawings, Piping and Instrumentation Diagram (P&ID) drawings and schematics
Experience in a Pharmaceutical/Biotech environment and knowledge in automation systems is a plus
Must be a self-starter with the ability to work independently
Must be proactive and results oriented, with strong attention to detail and able to complete work in a timely manner with minimal supervision

Laboratory Instrumentation Technician Resume Examples & Samples

Calibrates process instrumentation such as Temperature, Pressure, Humidity, etc
Utilizes CMMS to track, schedule calibration and maintenance records for lab process equipment
Qualified applicants must submit to and pass a Tuberculosis test prior to employment, or be medically cleared for Tuberculosis by a medical professional, and be able to maintain annual negative results
Experience with digital controls systems, PLCs, etc
Hands-on experience with the operation, repair and maintenance of Honeywell and Siemens control equipment devices

Laboratory Instrumentation Technician Resume Examples & Samples

Provides regular reports to senior management regarding throughput/performance, issues and projects in laboratories and other assigned production projects
Understands company policies and enforces safety regulations
Experience working with Reliability Engineers to determine Root Cause Failure Analysis and discuss vibration findings

Instrumentation Technician Resume Examples & Samples

Maintain integrity and perform safe and efficient maintenance of all instrumentation, control systems and equipment
Respond quickly and effectively to problems and breakdowns as requested
Adhere to the permit to work system while carrying out maintenance activities
Report all accidents, near misses and hazardous conditions
Participate as a member of offshore emergency response team
Five or more years of related experience in an industrial environment, preferably within offshore oil and gas
Instrumentation Technologist certification and/or Inter-Provincial Red Seal Journeyman's Certificate (Instrumentation); please attach your Journeyman’s / Red Seal ticket with your application
Working knowledge of regulatory and industry codes applicable to the instrumentation discipline
In-depth knowledge of calibration, installation and repair of electronic, pneumatic and hydraulic controls and systems
Proficient with an application of computerized maintenance management system (e.g. SAP)
Working knowledge of programmable logic controls (PLC), emergency control systems, fire and gas, and distributed control systems (DCS)
Effective communication and conflict resolution skills (written, oral and computer)

Instrumentation Technician Resume Examples & Samples

Maintain the integrity and perform safe and efficient maintenance of all instrumentation and control systems and equipment
Plan, coordinate and communication daily instrumentation maintenance activities
Respond quickly and effectively to problems and breakdowns
Participate as a part of an offshore emergency response team
Five or more years of instrumentation experience in an industrial environment, preferably in an offshore oil and gas environment
Experience downloading, testing, commissioning and troubleshooting control system hardware and software modifications (Bailey INFI 90 control systems is preferred)
Instrumentation technologist certificate or instrumentation and controls designer or engineer with relevant post-secondary diploma (e.g. chemical engineering technologist, petroleum technologist)
Valid Alberta Journeyman instrumentation Certificate or an Interprovincial Red Seal Journeyman instrument Certificate are preferred; attach your Journeyman / Red Seal ticket with your application
Working knowledge of programmable logic controls (PLC), emergency control systems, fire and gas and distributed control systems
Strong background in the design, implementation, maintenance of control system logic and equipment
Proficient working with a computerized maintenance management system
Understanding of control of work processes and systems

Instrumentation Technician Resume Examples & Samples

Advanced computer skills, including MS Word and Excel
Advanced mechanical/electrical skills
National Electric Code
Ethernet networks and associated equipment
Physical properties of gases and basic gas law
Routers and communication devices
Communication protocols such as Modbus, TCP, Modbus RTU, and Hart
Telephone and digital radio communications, and electronic theory and circuitry
Three years of electrical/instrumentation experience
Associates degree in electronics, or vocational certification in Electrical/Electronic or equivalent of education and experience required

Test & Instrumentation Technician Resume Examples & Samples

Experience in an occupant safety testing facility and performance testing on airbag and safety restraint systems
Experience with instrumentation used in safety testing, including TC’s, Load Cells, Strain Gages, String Pots, Accelerometers, CMM equipment, etc
Equipment experience includes operation of: HYGE or Servo sled, Tinius or Instron, airbags and safety restraint systems
Mechanical and electrical knowledge, welding experience (MIG, TIG, Arc), basic machine shop / fabrication experience
Basic background in pressure transducer, thermocouple soldering, accelerometer, strain gage, and ability to read schematics/wiring diagrams
Understanding how DMMs, O-Scopes, and other electronic testing devices are used

Instrumentation Technician Resume Examples & Samples

Participate in post-event failure analysis and root cause discussions and contribute to developing solutions
Ensure preventative maintenance guidelines are adhered to and maintain complete and accurate records associated with the technical and preventative aspects of your position
Three or more years of post-apprenticeship experience working in a maintenance role within a heavy industrial environment (e.g. SAGD, mining, pulp and paper, petrochemical, etc.)
Valid Alberta Instrumentation Technician Journeyman Certificate or an Interprovincial Red Seal Journeyman Certificate; attach your Journeyman / Red Seal ticket with your application in order to be considered
Valid Alberta Electrician Journeyman Certificate or an Interprovincial Red Seal Journeyman Certificate is an asset
Demonstrate strong interpersonal, technical and communication skills
Ability to read and interpret engineering drawings and equipment manuals
Self-starter with ability to make sound decisions
Strong commitment to continuous improvement within safe work practices, procedures and standards to ensure safe and reliable work execution

Instrumentation Technician Resume Examples & Samples

Provides preventive, scheduled, and emergency instrumentation and electrical support to all production processes in food processing plant environment
Installs, calibrates, troubleshoots, repairs and maintains plant control, process control instrumentation and related equipment. This equipment maybe mechanical, pneumatic, electrical or electronic
Work includes installing, calibrating, testing, repairing, cleaning and troubleshooting associated equipment. Type of equipment include transmitters, PID controllers, solenoid valves, pneumatic controllers and positioners, switch gears, solid state controls, relays, switches, contactors, indicating lights, and programmable logic controllers and SCADA systems
Installs, wires, troubleshoots, programs and may design programs for plant programmable controllers. It includes temperatures, pressure and flow systems
Installs, calibrates and repairs primary sensing devices such as thermocouples, pressure switches, temperature switches, gauges, level switches, transmitters, level devices, etc
Works from and interprets schematics, blueprints, diagrams, loop drawings, P& ID’s, computer system and specifications. Updates and corrects diagrams and documentation
Implement addition or modifications of instrumentation control systems and components used in manufacturing or processing of company products. Identifies instrumentation, electrical or electronic processes required to accommodate future growth
Provides scheduling and for calibration vendors to ensure timely completion and quality of work for equipment/ instruments
Assists instrument owners in completing calibration requests for new equipment (work with users to termine appropriate ranges and accuracy) as well as the timely repair/ replacement of faulty instruments
Maintains and troubleshoots plant uninterruptible power supply system
Identifies, isolates, and diagnoses failures using various types of test equipment
Installs, maintains and troubleshoots plant phone and LAN systems
Maintains plant fire alarm/ suppression systems and security CCTV
May prepare technical reports with recommendations for solutions to technical problems
Maintains all logs and required documentation
Determines measurements and develops drawings for installations, ordering equipment, parts, and supplies for installation of systems. Coordinates installations with other divisions/ departments as necessary
As requested, handles preliminary work arrangements such as work management systems, parts availability, shop inventory
Procures incidental tools and supplies in conjunction with their assigned work from the storeroom/ tool room where applicable during after-hours when the level of work does not require a storekeeper
May initiate work requests
Leads, trains and instruct other employees in their work and identifies training needs for other employees as well
Performs other job-related functions that may be assigned from time to time

Instrumentation Technician Resume Examples & Samples

Timely completion of tasks and work orders with appropriate documentation according to Standard Operating Procedures, applicable standards, guidelines, practices, and policies
Computer skill level appropriate to navigate and use corporate intranet and related applications, CMMS / CCMS, and standard word processing and spreadsheet programs
Ability to interact and communicate appropriately with Manufacturing, Quality, Technology, Engineering, and other departments to ensure satisfactory performance of instruments and systems
Represent Maintenance Operations on multidisciplinary project teams
Installation, calibration, troubleshooting, and modification of process control instruments or systems, laboratory instruments and analyzers, and support utilities
Programming / configuration of microprocessor-based equipment (PLCs, DCS, smart devices, etc.)
Collection and organization of technical data from equipment manufacturers, equipment users, and engineering personnel
Assistance with identification, purchase, and organization of spare parts
Other tasks as assigned by Instrument Services management

Instrumentation Technician Resume Examples & Samples

Vocataional trianing, technician or master craftsmen in electrics / electronic, instrumentation, controls or comparable
Or Bacherlor / Master degree in electrics / electroni, instrumentation, controls or comparable
3-5 years work experience desired
Good communications skills in German and English
Structured, proactive ans solution oriented way of workin
Team working ability

Instrumentation Technician Resume Examples & Samples

Responsive to new customers who call in for parts or service
Scheduling customer call-ins and around their contract commitments
Work independently or with other service technicians
Duties generally include but are not limited to; calibration services, trouble-shooting and/or repair of process instrumentation, installation and setup of new instrumentation, sales, support of their peers
Must have valid Driver's License
2 years of Instrumentation/ Process Controls experience
Associates degree in electronics/instrumentation/electrical engineering or equivalent
Familiarity/comfort with personal computers, email, Microsoft Office tools

Instrumentation Technician, Pulp & Paper Resume Examples & Samples

Preventive, Corrective, and Emergency maintenance of customer's Quality Control Systems
Perform Sensor verification and Calibration
Write Monthly Performance and Results Reports
Provide 7 X 24 emergency support to customer and technicians
Manage Performance Based Contract
Associates Degree or in lieu of degree 5 years of experience in electronics background or military background
Minimum of 1 year of related technical experience
2 years of experience on one of the following platforms: DaVinci or EMx
Capable of learning available analysis tools to solve complex system or process problems
Design/Engineer solutions to prevent reoccurring problems as knowledge is acquired
Able to conduct formal meetings with customer management personal
Capable of evaluating control effectiveness as knowledge is acquired

Instrumentation Technician Resume Examples & Samples

Validate, maintain, test, troubleshoot, calibrate and repair laboratory instrumentation
Improve technical procedures by participating in method development and validation of new systems
Work with management and scientific staff to establish and implement the appropriate solutions to potential or identified problems
Ensure that the data capture system is performing satisfactorily and that system maintenance, repair, archival of data is performed in compliance with GLP regulations
Ensure that all laboratory equipment is installed, validated, maintained, periodically tested, and repaired in accordance with GLP regulations
Prepare and maintain SOPs for all equipment and related areas. Prepare validation reports related to equipment validation and address QA comments
Initiate and/or perform change controls on instrumentation
Maintain calibration, maintenance and repair records as per SOP
Train staff on the operation of instruments
Work in collaboration with other service departments and/or vendors to coordinate activities that involve the other service groups
Interact with suppliers, service representatives, and participates in sponsor interactions for specific instruments
Provide a support function to address unexpected problems at short notice (e.g., set-up and operation of the equipment, instrumentation errors, etc.)
Manage project timelines and resource coordination in conjunction with laboratory management, with minimal supervision
Education: Bachelor’s degree (B.A./B.S.) or equivalent in a laboratory science or related discipline required
Experience: Two to four years related experience in biology, chemistry/pharmacy, or similar lab environment. An equivalent combination of education and experience may be accepted as a satisfactory substitute for the specific education and experience listed above
Other: Excellent verbal, written communication and organizational skills. Demonstrated independent analytical and problem solving abilities. Proficient with computers and instrumentation and analysis software. Demonstrated knowledge of GLP regulations. Ability to interact appropriately with all levels of employees. Ability to work effectively as a member of a team. Ability to handle stress effectively and adapt to change

Instrumentation Technician Resume Examples & Samples

Makes necessary decisions related to their levels of skill and knowledge, collaborating with the Section Leaders and Supervisor
Identifies errors in work and processes, promptly notifying Section Leader and Supervisor. Incumbent assists with the failure investigation
Incumbent is expected to seek advice and support from Department Supervisor/Section Leader
The incumbent is expected to construct, maintain and operate standard laboratory equipment, troubleshooting any failures
Responsible for maintaining flow by processing samples and meeting turnaround times
Incumbent is required to enter and review data, final approval submitted to Supervisor/Section Leader
Incumbent is expected to work independently or with Supervisor or Section Leader on as daily basis to meet workload demands

Instrumentation Technician Resume Examples & Samples

Two man site, maintaining Honeywell DCS and QCS systems
Process Control Equipment, responsible for regular maintenance and emergency maintenance, electronic, electro mechanical, software (PC and Honeywell operating software), operational functionality, Paper Process knowledge a plus
Basic PC Skills required
Must reside within 1 – 2 hours of customer facility
Minimum of a technical degree or equivalent years of experience with electronic or IT background
2 years of Computer and PC software skills including Microsoft Office Suite, Access, PowerPoint, and shows sound knowledge of a Microsoft networked desktop environment, and demonstrates interest and capability of keeping skill set current with changing technology
Knowledge in Electronics or Computer System(IT) or technical certificate

Instrumentation Technician Senior Resume Examples & Samples

Install, operate, inspect, troubleshoot, repair, calibrate/adjust, and maintain the following equipment including, but not limited to
Working knowledge in use and function of reciprocating or gas turbine engines, compressors, and electronic and processing equipment applicable to position
Experience in use and function of tools and equipment applicable to position including, but not limited to

Sxl-instrumentation Technician Resume Examples & Samples

Under general supervision, provides for inspection, maintenance, repair and installation of instrumentation and other associated equipment within an assigned segment of the pipeline system
Responsible for multiple pump stations and delivery facilities which may be fully to partially automated or manually operated, and could include one marine terminal or LPG terminal and the instrumentation aspects of various buildings, and equipment necessary to the Company's business operations
Carries out assigned preventive maintenance duties and installation assignments. Performs periodic and emergency overhauls and reconditioning of equipment including but not limited to: remote transmitter units, controller, product identification devices, uninterpretable power supplies, tank alarm, programmable logic controllers, fire detectors, temperature monitors, vibration monitors, line finders, regulated power supplies, frequency to D.C. converters, metering circuits, pressure and temperature transmitters, including totalizers, 24VDC and 120 VAC relay logic panels, water well controls, timers and counters, flash point detection equipment, vapor detectors, assorted panel meters, electronic tools and test equipment, control valves, instrumentation, control and supervisory equipment
Must use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (respirator, hard hat, safety glasses, etc.)
Inspect or oversee the work of contract employees in the installation or maintenance of electronic instrumentation equipment
Investigate and diagnose reported difficulties; make repairs and adjustments and restore equipment and facilities to proper operation. Must be able to use various test equipment, measuring devices, hand and power tools and gauges related to the electronic instrumentation field
Maintain safe and healthful working conditions by exercising sound judgment, complying with all industry safety regulations and standards, and keep current with changing industry regulation and standards
Performs the routine maintenance of pipeline RTU electronic and control equipment and recommends remedial maintenance as required

Sagamore Instrumentation Technician Resume Examples & Samples

Possession of a good safety minded attitude
Proficiency with both hand tools and electrical troubleshooting tools
Sound understanding of the principles of operation for magnetic and mass flow, temperature indication, pressure indication, and analytical transmitters; to include the ability to setup and troubleshoot these field instruments

Analytical Instrumentation Technician Resume Examples & Samples

Install, calibrate, repair and perform preventive maintenance of laboratory analytical instrumentation/equipment
Work directly with clients to troubleshoot, diagnose, and complete repair of a wide variety of laboratory analytical equipment
Disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of specialty equipment, systems and controls
Operates such electronic test equipment as multi meters leak testers
Inspects, evaluates and determines necessary modifications, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance
Troubleshoot/service or resolve problems while performing unscheduled work
Records and reports abnormal function or out of tolerance conditions of equipment and initiates corrective action and documentation
Locates part sources, estimates costs and purchases parts as required
Reinstalls, tests, evaluates, calibrates, and maintains instruments or devices upon completion of repairs
Document daily maintenance activity, repair and other work performed
Communicates with customer staff the calibration, repair and operation of equipment as necessary
Writes equipment, maintenance and calibration procedures

Electricial Instrumentation Technician Resume Examples & Samples

Troubleshoot and repair of power and control systems
Install, troubleshoot & calibrate industrial instrumentation. Instrumentation includes, but not limited to pressure and temperature transmitters, weight-feeders, analog and digital indicators, electromechanical actuators and gas analyzers
Preventive maintenance of power, control and instrumentation systems
Participate in installation and commissioning of electrical equipment
Preventive maintenance and troubleshooting of Medium Voltage distribution switchgear and electrical substation (230 kV, 13.8 kV and 4.16 kV)
Installation, testing and starting of Medium Voltage and low voltage electrical motors
High school graduate, supplemented by appropriate technical or vocational schooling, 10 years experience or 2 year electrical or electronic degree and 3 years equivalent work experience
Able to understand and follow oral and written instructions sufficient to carry out work orders
Experience working with three-phase power, 480 VAC and higher
Ability to read and interpret ladder logic diagrams, logic diagrams, process flow diagram, electrical schematics and equipment manuals
Solid knowledge of electrical theory
Skilled in use of basic electrical testing and measuring instruments
Able to use PCs running Windows operating system
Basic troubleshooting and operation of PLCs and VFDs
Basic understanding of Hydraulics and Pneumatics
Medium Voltage experience a PLUS
Previous E&I tech in manufacturing facility a PLUS
Must posses basic hand tools used in Electrical trade
Must be able to work rotating shifts(7:00 a.m. to 3:30 p.m.), (3:00 p.m. to 11:00 p.m.), (11:00 p.m. to 7:00 a.m.)

Launch Instrumentation Technician, Vandenberg Resume Examples & Samples

Read and interpret planning documents, schematics, datasheets/manuals, drawings, blueprints and engineering sketches
Adjust, repair or replace faulty components of ground hardware, test and integration equipment
Fabricate and install parts and systems used in launch environments using hand tools, power tools, and test instruments
Connect and verify pressure transducers, thermocouples, and other sensors
Install connectors, connector pins, terminals and lugs
Complete necessary wiring of the Electrical Ground Support Equipment for ground systems
Collaborate with launch engineers to troubleshoot failures and issues derived from launch activities
Lay out, build, test, troubleshoot, repair and modify wiring of electronics racks and junction boxes
At least 3 years of experience using power tools in a professional capacity
At least 1 year of experience with electronic system assembly and construction
A minimum of 3 years of experience working with any of the following instrumentation: Resistance Temperature Devices (RTDs), thermocouples, strain gages, load cells, displacement transducers, pressure transducers
Basic knowledge of Wheatstone bridge theory, ability to apply ohms law, and an understanding of DC electronics
Associate’s Degree in Instrumentation, Control Technology, Electrical Systems, or other related field
Experience working in corrosive environments and mitigation techniques
System level trouble-shooting skills and the ability to logically solve instrumentation system problems and determine corrective action
Knowledge in signal conditioning concepts for various types of sensors, to include the following: Thermocouple Types K,S, and E; TC bonding concepts: resistance weld on and adhesive bond on types; TC probes through thermowell sheaths; Cold Junction compensation concepts
Background should include experience with the following devices: DC power supplies; DC-DC convertors; UPS installations; Heat shrink tubing, cable harnessing, lacing, and proper strain relief concepts
Working knowledge of transducers, operational amplifiers, and the knowledge of measurement techniques for temperature, pressure, flow, displacement, vibration and the application strain gages are also highly desired. Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications
Working knowledge multiple bus architectures (PCI/PCIe, PXI/PXIe, GPIB, Serial, USB, etc.) and data communication technologies
Demonstrated capabilities in the development of comprehensive project plans that include all tasks; stage/gate milestones, and reviews necessary to successfully develop and implement solutions
Intermediate skill level using Windows Operating Systems
Intermediate skill level using Microsoft Office (Excel, PowerPoint, Word, Outlook, OneNote)
Knowledge in Data Acquisition concepts, hardware, and interfacing (SCXI and PXI based)

Control & Instrumentation Technician Resume Examples & Samples

Perform fault diagnosis and routine maintenance on control & instrumentations (pressure, flow, level, temperature, water and emission monitoring analysers) and actuation and control systems
Calibration and loop checking of instrumentation and control to the sites DCS/Control systems
Programming and Tuning via the DCS/PLC systems
Ensure maintenance targets are achieved safely, commercially and within environmental limits
Liaise with other station teams on operational performance issues
Assist in resolution of engineering and maintenance issues through the development of plant and process modifications
Schedule work using the computerised maintenance management system (CMMS)
Manage contracts and supervise and direct contractors
Work in accordance with the site safety rules
Deliver maintenance strategies and procedures
Broaden experience and competence through training and development
Deliver outcomes in all areas of work consistent with quality, health, safety and environmental policies and procedures
Work to maintenance strategies, procedures, documentation, drawings and manuals in line with maintenance practices
Maintain and develop good relationships with external bodies
Control & Instrumentation maintenance in a power or process based environment
Plant inspection, fault diagnosis and routine work on plant and equipment
Awareness of DSEAR and ATEX
Safety rules and safe systems of work
Health, safety and environmental management knowledge
Able to achieve maintenance targets within strict limits of operation
Able to take ownership of problems and offer solutions
Team player who can use own initiative
Prioritise workload and demonstrate effective time management skills
Communicate information clearly and concise to different stakeholders
Computer literate with knowledge of computerised maintenance management systems
Knowledge and understanding of rotating plant
Previous Control & Instrumentation experience in a power plant or process based environment
Plant inspection, fault diagnosis and routine maintenance
Health, safety and environmental management systems and safety rules
Contract management and contract supervision
Ability to deliver targets safely and commercially
Control and planning of routine and breakdown maintenance
HNC/ONC or equivalent in either electrical or C&I Engineering
A recognised C&I engineering apprenticeship ideally gained in a heavy process industry

Electronic / Instrumentation Technician Resume Examples & Samples

Two years of experience in electronics repair and service
A solid background in electronics and the ability to troubleshoot to the component level
Experience using electronic diagnostic tools
Experience troubleshooting dynamometer problems in the test cell and at the remotely located AC drives
The ability to program PLCs and troubleshoot PC issues

Instrumentation Technician Resume Examples & Samples

The calibration, repair, and maintenance of lab testing equipment
This work could be on any shift (1st, 2nd, or 3rd ) and could include an alternate workday schedule that spans a Saturday or Sunday
Work can be of a complex nature and involve hands-on electrical and mechanical troubleshooting and repair
Supports & promotes laboratory safety program and safe work habits
Associates in Applied Science in electro-mechanical or related field
At least five years of instrumentation calibration and repair experience
Ability to work any shift including weekends (8 and 10 hour shifts)
Ability to work overtime as needed to support the business
Ability to work in extreme hot and cold environments
Skilled in the use of MS Office products (Word, Excel, Power Point)
Ability to troubleshoot complex electromechanical systems
Provide a set of basic hand tools

Senior Instrumentation Technician Resume Examples & Samples

Perform calibrations of inspection, measurement, and test equipment (process control and automation instrumentation) according to detailed calibration work instructions, including some unique and highly complex instrumentation. Record results in Enterprise Asset Management System. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Communicate results as required by SOP
Maintains equipment by providing troubleshooting to ensure equipment performance is reliable and meets expectations. This not only includes adjusting, repairing, and replacing components (sensors, cables, connectors, control boards, etc.), but also independent analysis of communications and configuration of systems and controllers. Performs preventive, corrective, or emergency work orders and respond to service calls while the plant is in operation, which may include off-shift periods and weekends. Corrective work may include replacing electrical or powered component, including multiple phase motors. Assists in the review of PLC or HMI program logic during certifications or troubleshooting to better understand deviations from proper operation. Develops or updates machine logic and execute test protocols either independently or developed by Engineering and under their direction, depending on the complexity for the scope
Maintains and ensures documentation, both written and electronic, is accurate, complete and factual as required by policies, procedures, and regulatory guidelines. Documents activities supporting maintenance best practices to ensure that continuous improvement activities have adequate and reliable data for analysis. Reviews and analyzes measurement data collected by self or others in order to ensure proper documentation, adherence to procedures, and proper use of standards and references. Identifies abnormalities, trends, and/or predict future issues based on available data. Leads the development of calibration, certification, or other maintenance related procedures and methods based on detailed specifications, drawings, and other technical requirements and review and approve calibration data sheets. Reviews updated or modified calibration procedures developed by other Instrumentation Technicians or contractors
Maintains primary, secondary and/or working calibration standards. Reviews calibration data sheets for departmental calibration standards to ensure standards are within manufacturer's stated tolerances. Identify out-of-tolerance conditions and communicate results as required by SOP
Executes test protocols developed by self or others (Reliability and/or Engineers) in support of the qualification of new and existing equipment. Consults with Engineer/Reliability, vendor, or project manager on results and feedback. This may include support for Factory Acceptance Testing (FAT) or Site Acceptance Testing (SAT) and related travel. Works independently or with Reliability and Engineers on projects and improvement initiatives to ensure equipment meets site standards. Reviews project designs and make recommendations for automation, measurement equipment, or calibration standards
Prepares, reviews and tests calibration and configuration reports for equipment and calibration record setup to ensure equipment calibration requirements are completely and properly documented in the Enterprise Asset Management System (EAM). Supports the development of training material and provide a base level of training for other technicians or contractors in calibration concepts and procedures
Reviews and provide final approval (closing) on technician work orders. Develops or guide the development of metrics and information to be used in root cause analysis (RCA) meetings. Actively participates in and RCA meetings to identify and resolve calibration and equipment issues on a real time basis and improve business performance

Instrumentation Technician Resume Examples & Samples

Grade 12 or GED
Completion of the Instrumentation Engineering Technology Program from SIAST or equivalent, plus 12 months experience in a broad cross section of instrumentation work in an Industrial Plan
Completion of a recognized journeyperson apprenticeship and qualification in Industrial Instrumentation (Interprovincial - Red Seal)

Electronics & Instrumentation Technician Resume Examples & Samples

Analyzes moderately complex data and prepares effective reports and recommendations for new ideas
Relies on experience, judgment, and established policies and procedures to plan and accomplish assigned goals
Serves as a resource to others in the resolution of complex problems and issues
Performs a wide variety of functions such as installation, maintenance, and repair of equipment for generating, distributing, and utilizing electrical energy. Uses instruments to test circuits and replaces or installs new power, light, electronic and control circuits
Troubleshoots electrical malfunctions, inspects circuits and wiring for shielding and grounding, and tests electrical equipment for safety and efficiency
Installs, measures, cuts, bonds, threads and assembles electrical conduit

Instrumentation Technician Resume Examples & Samples

Candidate must have two years of formal training from a technical/trade school with emphasis in electrical, controls, instrumentation, or similar discipline
Similar course work toward a related degree may substitute for the training requirements
2 years’ experience in assembling, troubleshooting, or maintaining data acquisition or similar systems
Experience should include working with small gauge wire as well as soldering
Candidate should have the experience and knowledge to safely conduct explosive and industrial operations, follow test procedures, setup and monitor tests & instrumentation, as well as provide progress reports
This position requires specific knowledge of test instrumentation and data acquisition as it relates to test and evaluation
Candidate should have experience working with sensors, signal conditioners, analyzers, and oscilloscopes
Position requires at least a basic skill level in the Microsoft Office Suite
Candidate must be able to work in a team environment and must understand the processes involved with the use and testing of military ordnance systems and components, to include recognition of a safe policies and practices
U.S. Citizenship and the ability to obtain and maintain a U.S. DoD Security Clearance required
Working from scaffolding and man-lifts
Must be able to handle heavy instrumentation equipment
Must demonstrate professional behavior at all times when dealing with clients, management and employees
Grooming and dress must be appropriate for the position and must not impose a safety risk to the employee or others
Current driver’s license, car registration and auto insurance required

Instrumentation Technician Resume Examples & Samples

Expected to have thorough vehicle knowledge and have the ability to dismantle, prepare and assemble vehicle components and sub-assemblies to carry out an instrumentation task
Ability to follow work instructions and procedures to enable a robust measurement & data collection service
To build / assemble bespoke Instrumentation systems as directed by Instrumentation engineers
Will have knowledge of different transducers and their applications for making vehicle and rig based measurements
Will have good soldering skills at connector & PCB level
Will be able to work to circuit diagrams / electrical schematics
To support instrumented test vehicles/ bucks or rigs off-site during tests
Will have experience working with Hybrid or Electric vehicles or working with High Voltage systems
Full Apprenticeship (Motor Vehicle background) ideally to HNC level
Instrumentation Experience
Prototype Test Vehicle Experience
Knowledge of vehicle electrical systems and ability to work to engineering / circuit diagrams
Understanding of computer systems and software including MS Word & Excel
Knowledge of Datalogger systems, Suchy Datalogger systems would be an advantage
Team player but also able to work independently
Self-starting, relishes challenges
Flexible and adaptable to new situations
Ability to travel to support tests

Instrumentation Technician Resume Examples & Samples

Safety minded attitude
Commitment to Safety & Quality
Reliable & Punctual
Communication skills and computer proficiency with MS Office products
Duties include troubleshooting, repair, calibration, or removal and replacement of field mounted instrumentation and valves controlling process equipment
Ability to interface and problem solve in a team environment consisting of various skill types is essential
Familiarity with Rockwell software and the HART protocol
Familiarity with industrial manufacturing in a continuous production environment
Setup and troubleshooting field instruments and valves
Sound understanding of the principles of operation for magnetic and mass flow, temperature indication, pressure indication, analytical transmitters, and discrete or analog valve control
Certification in SCBA, emergency response and Hazmat a plus
Associate’s (or higher) in electronics or controls preferred
Previous industrial or military controls experience required

Computer Electronic & Instrumentation Technician Resume Examples & Samples

Two (2) year technical degree or higher in Electrical Maintenance OR four (4) years of electrical or electronic experience in an industrial or military environment
Willing and able to work any shift, weekends, holidays, and overtime
Willing and able to sign a confidentiality agreement as a condition of employment
Experience working with computers
Experience working with PLC’s, RSLogix 5000, RSLogix 500, RSLinx
Experience working with pneumatic systems
State (Arkansas or other) electrical license

Instrumentation Technician Resume Examples & Samples

Review project instructions and specifications to identify, modify, and plan the selection and application of instrumentation and data collection
Participate in planning activities for project development, and recommend necessary instrumentation hardware needed to support the plan
Provide guidance and technical support for the set-up and operation of data acquisition that will be used for field test or endurance test
Assemble, operate, disassemble, and troubleshoot complex fuel, electrical, engine and test cell control systems and associated instrumentation
Tune electrical and mechanical systems for proper operation using PID control schemes
Compile engine data, perform preliminary calculations, prepare necessary graphs, write test reports and maintain test files
Assist with inspections and maintenance on engines and support equipment that are associated with engine development testing
Operate and perform daily maintenance of the gaseous and particulate emissions test equipment
Operate and perform the daily maintenance of the particulate filter weigh chamber and scale
Monitor and perform the calibration of instrumentation and gauges that support the program testing needs and schedule
Operate drill press, grinders, lathes, mills, or other machines to make and modify parts or fixtures for the application of instrumentation needed for experimental testing
Develop new techniques and applications that improve department efficiency
Participate in facility safety activities
A minimum of a 2-year technical school diploma, certificate in an electrical / controls field or is required
Minimum of five years of experience in an engine testing / operating or highly technical product testing / operating environment is required
Experience with engine PLC controls and monitoring is required
Experience and knowledge in vibration measurement and analysis is required
Experience with A&D iTest data acquisition and control platform is preferred
Must be able to use basic inspection devices such as micrometers, calipers, feeler gauges, bore gauges, etc…
Must be able to use basic electronic devices such as multimeters, oscilloscopes, process calibrators, etc…
Must be proficient in MS Office Suite programs
Travel up to 15% required

Instrumentation Technician Resume Examples & Samples

Specify, procure and install transducers and data acquisition equipment
Configure and operate data acquisition test control software
Prepare data for analysis
Troubleshoot and repair AC and DC circuits
Document tests using Microsoft Office suite
Support engineering customers
Operate heavy duty trucks
Contribute to continuous improvement efforts
2 years of relevant work experience
Proficiency with Microsoft Office applications (Word, Excel, Powerpoint, Outlook, Access) and aptitude to learn new software applications
Ability to use sound judgement to fix issues with equipment and processes
Ability to communicate effectively with technicians, engineers, and managers
Ability to use hand tools and work on heavy duty trucks
Ability to work effectively in an exciting environment with shifting timelines and project demands
Knowledge and experience in the following areas is preferred
Controller Area Networks (CAN)
Computer networking and programing
Heavy duty truck driving

Instrumentation Technician Resume Examples & Samples

Completing preventative maintenance, service, troubleshooting and quality repair of all instrumentation-related equipment
Inspecting, testing and reporting on defects and deficiencies
Identifying spare part requirements to maintain equipment design performance
Monitoring, benchmarking and evaluating technology to ensure continuous improvements
Performing detail design, device programming, configuration and calibration on equipment
Commissioning and installing mechanical, electrical and communications equipment
Performing Backup, Configuration and Disaster Recovery Management; and
Developing work instructions and operating procedures for control system specific activities

Instrumentation Technician Resume Examples & Samples

High School Diploma or equivalent required. Associates degree in a related field is preferred
At least 3 years experience in an industrial facility or in the military
Extensive knowledge in instrumentation aspects of plant operation
Use of SAP PM Module
Use of standard PC software- Excel, Outlook, Word
Can communicate effectively, both written and verbal
Experience in a Union environment desirable

Instrumentation Technician Resume Examples & Samples

The successful candidate must hold a BCTQ British Columbia Trade Qualification or an IP/Red Seal in Industrial Instrumentation
A minimum of five years of relevant experience
Experience working in the Petrochemical Industry is preferred
Instrument Technologist Diploma would be considered an asset
Experience working with analyzers: Gas Chromatographs, combustion analyzers, Continuous Emission Monitors (SO2,NOX), Opacity
Experience working with Distributed Control Systems: Bailey Infi-Net, Honeywell TDC 3000, ABB
Experience working with Equipment Monitoring: Vibration monitors, Anti-surge controls
Experience working with Allen Bradley Programmable Logic Controllers / HMI’s, Allen Bradley
Experience working with ModBus RTU, RS-485 communications
Experience working with SAP CMMS
Working knowledge of Microsoft Excel and Word

Instrumentation Technician Resume Examples & Samples

 Data acquisition support for Test Engineers
 Motivated self‐starter, willing to work overtime as needed
 Strain Gage application based on print locations from engineering
 Primarily use SoMat Edaq data recorder
 Diligently follow established engineering procedures and technical specification documents
 Electronic/data recorder troubleshooting
 Keep running inventory of instrumentation equipment and consumable supplies
 Team Player (intra/extra organizational)
 Ensure that work area is well maintained and meets OSHA requirements
 Meet tight deadlines
 Multi‐task multiple projects at one time
 Maintain strict confidentiality
 Provide own technician level tools
 Travel for test trips(10‐15%)
 Minimum 2‐year degree
 3+ years experience in related field
 Familiar with test lab/instrumentation environment
 Strong mechanical aptitude
 Strong electronics background (DC Circuits)
 General Fabrication Skills (Machining/Welding)
 Strong written and verbal communication
 Proficient with Microsoft Office programs such as Word, Excel, and PowerPoint
 Detail oriented
 Valid drivers license
 Able to meet DOT requirements for driving trucks and trailers (
 Forklift operation experience
 Power sports experience preferred

Instrumentation Technician Resume Examples & Samples

Perform troubleshooting and advanced programming of PLC’s and HMI’s using various interface devices and software
Perform troubleshooting of power related devices such as MCC’s, Substations, motors, VFD’s, soft starts
Perform troubleshooting of all electronic equipment, Self-contained PID controllers, HVAC systems, security systems
Installation of new electrical equipment including PLC’s, instrumentation, MCC’s
Installation, repair and on-site calibration of process instrumentation, thus including knowledge of pressure, motion, flow, level, weight and temperature measurements
Good working knowledge of electrical schematics
Good working knowledge of the N.E.C
Skilled on systems from 120 volt single phase to 4800 volt three phase
Skilled satisfactorily use electrical test equipment
Perform preventative maintenance on Plant equipment through the use of the Computerized Maintenance System
Expert knowledge of and adherence to all safety requirements for lock-out/tag-out, for confined space and tank entry, for handling of hazardous materials, and for wearing of personal protective equipment
Upon completion of an assignment, clean the area of all maintenance materials and debris; notify operating personnel as to completion of the assigned work
Good working knowledge of pneumatic, hydraulic, electronic control equipment, and electrical panels
Manage small projects as required
Must have a high school diploma/GED or 5 years coffee or tea processing experience
Strong teamwork skills
Expert knowledge of PLC’s and related hardware
Strong background in electrical equipment and hardware with a major emphasis on higher level systems
PID control, computer graphics and computer board repair
150 day qualification period

Instrumentation Technician Resume Examples & Samples

Product application servicing and repair, including cleaning, assembly preparation, component installation and testing of Canrig equipment
Install and service Canrig supplied drilling rig instrumentation and communication equipment in the field (including wiring and testing of systems prior to installation)
Troubleshoot, repair and support Canrig supplied electrical and instrumentation hardware in the field
Perform surveys of drilling rigs to determine the required hardware configurations
Train drilling rig crews and other customers in the use of Canrig systems
Rig up and rig down instrumentation equipment on customer’s rig sites during rig moves
Encourage sales of Canrig products and services to potential customers in the field
Promote and grow a positive relationship with Canrig customers
Prepare data reports to customer’s specifications
Provide feedback to the New Product Development team to help enhance the Canrig technology
University or technical degree/diploma or equivalent in electronic or computer sciences
Minimum 1 – 3 years industry experience with computers and networking
Minimum 1 year previous oilfield experience
Valid driver’s license with clean abstract
Instrumentation Journeyman Certificate would be an asset but is not required
Experience with wiring and installation of cabling systems
Experience with databases, TCP/IP networks, modems and remote data transmission
Superior computer skills with advanced knowledge of hardware configuration for Linux and Microsoft Windows XP operating systems
Strong electronics understanding
Be able to present themselves in a professional and competent manner
Ability to work independently and as part of a team in a dynamic fast paced work environment
Reliable and punctual
Adaptable and keen attention to detail
Work a predetermined rotational schedule (typically 14 days on, 7 days off) with on-call rotation and possible overtime as operational needs dictate
Participate in a rotational 24 hour on-call schedule providing technical support
Be willing to work out of town
Be able to live in a dry camp environment while working out of town

Instrumentation Technician Resume Examples & Samples

Maintain an on-going two-way performance dialogue with area Chief Engineer
Perform tasks in accordance with planning and scheduling
4 – 6 years of Instrumentation/Calibration related work experience
Experience working with established GMP procedures in the calibration and maintenance of utility, process and lab equipment, preferred
Experience working with CMMS (Computerized Maintenance Management System - Maximo), preferred
Ability to read and understand technical material including operating manuals and standard engineering drawings is required

Instrumentation Technician Resume Examples & Samples

Work on instruments ranging from pressure transducers, weightometers, flow controllers, various level monitors and temperature sensors; ensure all systems are wired to communicate with PLC
Responsible for instrumentation equipment maintenance
Regular field and programming troubleshooting / adjustments of equipment
Ensure that the instrument readings are reliable and accurate at all times
Report all accidents to supervisor
Any other duties required by the Supervisor
College Degree in Instrumentation and control or equivalence; or a minimum experience of 5 years as Instrumentation technician
A valid Electrical Journeyman License or equivalent
Possess the physical requirements to perform the job
Possess a good work ethic, a positive attitude and the ability to work in Team
Strong ability to effectively communicate in English (oral and written)

Senior Instrumentation Technician Resume Examples & Samples

Management of the equipment within the process control domain according to the prescribed key performance indicators from the process control department
Best practice for instrumentation developed within relevant legal and safety frameworks
National technical diploma or NQF level 5 equivalent or,
Competent as Instrument Mechanician
3 years relevant work experience
Knowledge of applicable laws, standards and specifications

Instrumentation Technician Resume Examples & Samples

Assist in the specification, installation, set-up, and calibration of instrumentation and related equipment, systems and processes.These include various Electronic, Thermal, Pneumatic, Vacuum, Hydraulic, Robotic, and Computer
Maintain and if necessary, repair existing instrumentation/electronic equipment used in the plant
In conjunction with Quality, Process Control, and/or Customer requests, routinely performs calibrations for all plant instrumentation
Keep accurate documentation of all repairs and calibrations
Maintain and develop necessary skills for the care and proper use of recording, indicating, and control instrumentation used in the plant
Assist and instruct others as required in the use and operation of plant instrumentation and related systems and equipment
Other Maintenance as may be required
Must at least have A.S. Degree in Electronics or equivalent training from a technical school
Must have a minimum of 1 year of Electronics/Instrumentation experience
Must be capable of logically analyzing problems and functioning effectively with a minimum of supervision
Must be able to troubleshoot systems with Programmable Logic Controllers (PLC)
Must have excellent oral and written skills
Must be able to work well with others
Must be a U.S. Citizen or Permanent Resident (Green Card) to apply

Instrumentation Technician Resume Examples & Samples

Be able to take directions, and receptive to training and mentoring
Proficiently identify and work with various material components
Expert tubing skills
High level of pneumatic, electronic and micro-computer instrument operation
High level of device identification and installation
Expertly read and comprehend drawings and specifications
Expert tool usage, both personal (personal tools minimum listed below) and supplied
Tool pouch
Side cutters
Wire strippers
Philips screwdriver
Hacksaw
Stakon pliers
Linesman pliers
Water pump pliers
Chanel locks
Tape measure
Needle nose pliers
#6 screwdriver – Robertson
#8 screwdriver – Robertson
Terminating screwdriver
Small flat screwdriver
Large flat screwdriver
Knife
Level
½ - 1 ¼ KO cutters
Multi-meter
3/8 socket set
Open end wrench to 1”
Crescent wrench
Allan wrench set
Voltage tester
Hammer
Tool box
14” Pipe wrench
¼” and 3/8” tubing benders
Tubing cutters
Expert level calibration knowledge
Proficient knowledge of multiple control installations
Implement safe work practices and procedures
Maintain exceptional workmanship habits
Proficient in the usage of various calibration meters and measurement devices
Proficient knowledge of Hazardous location requirements
Mentor junior apprentices

Instrumentation Technician Resume Examples & Samples

Experience in process controls system installation, programming/calibrating, tuning, and troubleshooting as they are related to DCS systems, control valves, industrial instrumentation for flow, pressure, temperature, etc
Experience in utilizing test equipment such as multi-meters, hart communicators, signal generators, and PC driven software
Willing and able to work afterhours and call-ins
Possession of an Oregon Electrical License of “Limited Energy Technician, Class B”, or higher
Two (2) years of industrial maintenance experience
Associate or Technical degree or higher in Electrical Systems, Instrumentation, or Electronic Technology
Experience working with Industrial Motor Controls, e.g., Programmable Logic Controllers (PLC’s), motors controls, control valves, electrical distribution, industrial instrumentation for flow, pressure & temperature
Experience installing, repairing, and testing the accuracy of flow meters, pressure gauges, temperature indicators, controllers, etc
Experience programming, tuning, and troubleshooting DCS systems and process control loops
Experience in diagnosing and troubleshooting systems of communication such as control net, device net, and Ethernet
Experience in the pulp and paper industry
Experience with Chemical Process Safety

Launch Instrumentation Technician, Vandenberg Resume Examples & Samples

Associate’s Degree in Instrumentation, Control Technology, Electrical Systems, or another related field
Operational knowledge of an oscilloscope & multimeter, soldering wires & connectors, operation of various crimping tools, wire stripping, ohm’s law, continuity testing, pinning out a military type connector, routing & tie wrapping cables, drilling & tapping holes, and building junction boxes
System level troubleshooting skills and the ability to logically solve instrumentation system problems and determine corrective action
Background should include experience with the following devices: DC power supplies; DC-DC converters; UPS installations; Heat shrink tubing, cable harnessing, lacing, and proper strain relief concepts

Senior Instrumentation Technician Resume Examples & Samples

The Lead Instrument Technician will be accountable to utilize their skills and experience to achieve the safe and accurate completion of tasks on their assigned shift in support of plant operations
Timely completion of tasks and work orders with appropriate documentation according to standard operating procedures, applicable standards, guidelines, practices, and policies
Safe operation of tools and shop equipment, and safe execution of work in the field
Computer skill level appropriate to navigate and use corporate intranet and related applications, CMMS/CCMS, and standard word processing and spreadsheet programs
Assist in the creation or modification of technical documents
Represent Maintenance Operations on multidisciplinary project teams and make presentations as required
Installation, calibration, troubleshooting and modification of process control instruments or systems, laboratory instruments and analyzers, and support utilities
Programming/configuration of microprocessor-based equipment (PLCs, DCS, smart devices, etc.)
Assistance with systems start-up and validation
Collection and organization of technical data from equipment manufacturers,

XRF Senior Instrumentation Technician Resume Examples & Samples

Recording and periodically interpreting results to present to QC supervisor, results are evaluated in a timely manner
Assists in maintaining and operates equipment by following operating instructions, troubleshooting breakdowns and performing preventive maintenance. Record findings in logbook
Assists with preparing method SOP’s, validation protocol and reporting
Assists the Department Supervisor in monitoring and checking for the completion of all daily H&S checks, monthly H&S meetings, emergency protocol and any incident/accident reports
Follows current approved methods, SOP’s, Work Instructions (WI’s) and QA/QC protocols
Makes necessary decisions related to their levels of skill and knowledge, collaborating with the Department Supervisor
Identifies errors in work and processes, promptly notifying Department Supervisor and assists with the failure investigation

Instrumentation Technician Journeyman Resume Examples & Samples

Install, calibrate, test, troubleshoot and maintain instrumentation equipment on new or existing plant equipment
Troubleshoot electrical, instrumentation and control equipment
Consult manufacturers' manuals to determine test and maintenance procedures
Use pneumatic, electrical and electronic testing devices to inspect and test instrument and system operation, and diagnose faults
Consult with and advise process operators
Implement loss management practices
Repair, maintain and adjust system components or remove and replace defective parts
Do risk assessments
Calibrate and maintain components and instruments according to manufacturers' specifications
Work with engineers on basic design
Install and maintain instruments on new or existing plant equipment and processes
Interpret and use appropriate CSA, ISA and API installation standards and practices

Senior Instrumentation Technician Resume Examples & Samples

Is self-motivated, self-managed and engaged in the planning process
Demonstrate a high level of knowledge and understanding around Personal and Process
Must be independent/ autonomous, requiring little day-to-day guidance
Strong Knowledge of BSEE 14C and 30 CFR (T-2 Safety System Training)
Strong PC application skills (esp. Excel, Word)
Strong planning, scheduling, and organization skills
3-5 years’ offshore and industry experience with Production Operations required
Thinks Strategically

Instrumentation Technician Resume Examples & Samples

Maintain and install instrumentation equipment in first class working condition
Fault finding and attending to breakdowns/Able to fault find (PLC & VSD’s)
Calibration of instrumentation equipment, and auditable record keeping thereof
Ensure efficient safe operation of machinery and good instrumentation and electrical fault finding Complete the necessary administrative tasks for AMM, SHE,
Very Good understanding of PLC’s and VSD’s
Minor projects and safety and Housekeeping
Maintain Instrument Manuals, Drawings and Panels
Planned maintenance, Condition Based maintenance
Line efficiency, WO completion rate, SHE audit requirements met
Fault finding on various instrumentation equipment and processes
Analysing and investigating on recurring instrument faults
Proactive and shows initiative to continuously improve equipment performance
Complete necessary job cards and instrument checklist

Instrumentation Technician Resume Examples & Samples

Perform routine calibrations of instrumentation
Perform maintenance, troubleshooting, repair, design, installation, and configuration of equipment, instrumentation and control systems
Identify and correct measurement errors
Replace instrumentation and controls as needed
Maintain configuration management to ensure compliance of the system
Redline drawings, engineering documentation and other technical specifications
As necessary provide input and support for the design, installation, and upgrade of the instrumentation and control systems
Execute assignments to support Metrology, Facilities, and/or Engineering projects
Identify “Out of Tolerance” conditions and perform corrective actions to return the device to within specification. Participate with investigating and documenting the potential impact that the “Out of Tolerance” condition may have had on the instrumentation and process
Develop and/or revise calibration procedures and job plans while looking for ways to improve how calibrations and troubleshooting is performed in an attempt to make those practices more efficient
Provide support and training to peers to improve their abilities and increase their technical knowledge
Maintain instruments, standards and tools. Perform equipment inspection prior to and upon return from vendor certification and review associated documentation
Attend and actively participates in initiatives to support the business
Prepares and assists technicians, managers and planner/schedulers in preparing labor/material estimates
Assists supervision with the assigning, scheduling and prioritization of work order requests using maintenance management systems
Makes recommendations and prepares orders for spare parts, additional stock room items, tools, etc
Consults with supervision and other mechanics on problem resolution/troubleshooting
Keeps supervision informed of problem issues
Working knowledge of hand and power tools, must be able to identify and properly use the correct tools and NIST traceable test equipment for the task assigned including multi-meters, RTDs, temperature baths, dry blocks, pressure indicators, dew point monitors, tachometers, timers, weights, scales and dimension indicators. Working knowledge of pneumatics is also required
Must have ability to read blueprints, drawings, technical manuals and based on them, performs necessary operations for the installation and/or repair of equipment. Experience with Hazardous Energy Control and line break is desirable
A minimum of 4 years full time experience (8,000 hours) industrial or military experience as an Instrument Technician with broad spectrum of calibration and process control experience involving but not limited to Conductivity, DC and Low Frequency Electromagnetic, Flow, Level, Mechanical, Optical, pH, Pressure, Temperature, Time, Speed and Weight. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions
Must be self-motivated, able to work both independently and as part of a team with strict adherence to all Environmental, Health, and Safety policies and procedures
Candidates must have good comprehension and work experience using calibration principals
Basic computer skills, Microsoft Office

Instrumentation Technician / Engineer Resume Examples & Samples

LabVIEW programming and embedded system design
Utilize National Instruments data acquisition hardware (real time and FPGA), off-the-shelf test equipment, and custom developed hardware
Employ strain gauges, LVDTs, thermocouples, fiber-optic sensor, and other off-the-shelf measurement devices
Troubleshoot software and hardware systems
Design circuits, PCBs and other electrical subsystems
Create and maintain documentation, wiring diagrams, schematics, version control history, and bug tracking for new and existing sensors and applications
Document work performed, lessons learned, research findings, and more to be presented to others and summarize individual contributions
Complete assignments in a timely and effective manner within project budget to set and meet deadlines
Observe and follow all company safety rules and procedures
Communicate tactfully and effectively, both verbally and in writing
Maintain effective work relations with those encountered in the course of employment
Bachelor’s degree in Electrical Engineering or related field, OR a minimum of 5 years of instrumentation experience using LabVIEW and custom sensor development
Proficient in LabVIEW programming and embedded system design
Knowledge of mixed signal design
A basic understanding of electronics, electrical circuits and instrumentation, and fiber optic technology and instrumentation (voltage/current/resistance/circuit fundamentals)
Knowledge of and/or experience with various programming languages (C, C++, Java, Python, Matlab, etc.)
Be available to work on site. A long-term commitment to the project is preferred
Be a dedicated and hard-working individual who is eager to learn

Instrumentation Technician Resume Examples & Samples

Troubleshoot, maintain, install, and calibrate instrumentation equipment for devices related to the measurement of speed, torque, flow, humidify, pressure, temperature, voltage, current, relative position, resistance, strain, vibration, and concentration
Install and harness various electronic devices and interface with the test systems
Work cross functionally with data customers, operations and quality groups to improve data quality and test processes
Ability to follow procedures and forms
Fabrication and wiring various electrical/electronic enclosures for engine test purposes
Ability to aid in the evaluation of new instrumentation technology by fabricating test hardware and carrying-out tests per instructions
Able to apply good engineering judgment to identify improvements in calibration processes
Able to recommend modify calibration/maintenance forms as existing equipment/software is upgraded
Works well in small and large team and with all levels of the organizations
For MET candidates knowledge of fundamentals of fluid mechanics, stress/strain, thermodynamics, and dynamics
For EET candidates knowledge of electronics, electrical theory, and data acquisition
For CET candidates programming experience in C++ as well as Linux scripting
Knowledge of fundamentals of measurements such as pressure, temperature, speed, torque, flow, and data acquisition. Understands fundamental operating principles
PC skills (i.e. aptitude in Windows Excel and Word required; Linux scripting, Windows, Visio, Autocad, and Minitab desirable)
Ability to follow and/or write work instructions and complete related forms
Light fabrication skills (e.g. ability to use hand tools, drill press, solder)

Instrumentation Technician Resume Examples & Samples

Associate Degree in Electronics -or- equivalent work experience in lieu of the degree
Oregon Limited Energy Technician License
5 years of installation and maintenance of electronic equipment experience
Current driver’s license
Oregon Limited Energy Technician Class A license is desired

Instrumentation Technician Resume Examples & Samples

Responsibilities of the Service Technician include on-site installation, maintenance, and troubleshooting. A qualified candidate must have experience troubleshooting and repairing HPLC, GC, GC/MS, FTIR, UV / VIS, AA and other common laboratory equipment, reading/writing technical training manuals, writing procedures. General laboratory equipment maintenance such as hoods, balances, ovens, freezers and incubators would be in the scope.Our Service Technicians are also responsible for the operations, maintenance, and repair of central building system instrumentation and pneumatics equipment at a world class chemical sciences research campus
A background in electronics is required, prior laboratory or service experience is desired
Experience with Siemens and/or Honeywell building automation systems is a plus
Demonstrated use and understanding of physical standards of mass, temperature flow and pressure
Working knowledge of computers and laboratory software
Required to be able to read and work from blueprints, schematic diagrams and specification manuals
Must be physically able to perform basic maintenance tasks to the highest caliber, which includes ability to: climb ladders, work in confined spaces

Controls & Instrumentation Technician Resume Examples & Samples

Calibration of new and existing instruments, control valves, controllers, etc
Monitoring and trouble-shooting of control loops, instruments, and/or entire control systems
Maintains daily maintenance and plant calibration logs
Able to be contacted in case of, and responds to, an emergency
Able to read, modify, and troubleshoot through PLC and HMI codes
Install VFD’s, program, and tune settings for proper operation
Supports plant production needs and priorities to achieve plant goals
All other duties as assigned or become evident
Proven decision making ability and works well in a team environment
Ability to work various hours and shifts
Journeyman in Electrical or 2 year degree in an equivalent field
Achieve and maintain required certifications (i.e. ISA, etc.)

Senior Instrumentation Technician Resume Examples & Samples

Responsible for the maintenance and calibration of all instrumentation and control system equipment within the Hillsboro Oregon facility to include utilities, Aseptic filling, Packaging, Automated Inspection and QC laboratory instruments
Provide complex emergency troubleshooting and complex repairs of all the HTO site control systems and instruments in the areas of Filling, Packaging, Inspection, QC, Tank Management, Utilities, Warehouse and Distribution Center
Provide support to engineering and operations in the design, installation, testing, operation and maintenance of Fill Finish manufacturing and support equipment
Ensure all assigned equipment and associated subsystems are operated and maintained in the following manner
All instrument calibrations are performed at the appropriate interval and is completed by the assigned due date
All equipment remains in its designed and/or validated state at all times
All equipment operation is in accordance with Federal, State, Local and Genentech regulations, procedures, and policies
Ensure / maintain all assigned equipment areas in a constant state of inspection readiness; specifically, but not limited to, the following
Cleanliness
Personnel and Equipment Safety
Compliance to cGMP requirements
Continuously evaluate the operation of all systems and associated subsystems at Genentech Hillsboro. Identify specific process improvement needs and provide recommendations for system upgrades
Identify training deficiencies, provide recommendations for training improvement, develop new training materials and provide calibration OJT training to N1s, N2s and N3s
Continuously evaluate all Standard Operating Procedures, engineering drawings and various other controlled documentation for accuracy and applicability. Submit appropriate change requests to supervisor to correct any deficiencies discovered
Create new Maintenance Strategy SOPs and Work Instructions as required
Continuously evaluate maintenance/calibration practices to eliminate non productive activities and implement productivity enhancements
Perform Confined Space Entry on an as needed basis
Complete assigned scheduled and corrective maintenance in a timely manner following all cGMP documentation guidelines
Work in close proximity to hazardous chemicals, high and low temperature liquids, high pressure liquids and gasses, steam, and moving machinery/equipment
Coordinate contractors who perform repairs, modifications, and installations of instrumentation, control systems, and associated equipment. Perform installations of new complex instrumentation and process control equipment
Perform complex instrument calibrations in accordance with standard operating procedures
Perform Variable Frequency Drive replacements and configurations
Perform complex configuration of the site’s instrumentation
Work directly with Manufacturing, Engineering and various Quality organizations on new system installations or modifications and maximize equipment availability
Conduct work in a GMP regulated environment
Participate in functional teams and cross functional teams as instrument subject matter expert support
Identify and implement process improvements within functional group which improves inspection readiness, productivity, reduces time bound maintenance, or eliminates non- value added activities
Use project management skills to complete complex improvement projects by their due dates

100

Instrumentation Technician Resume Examples & Samples

Experience in designing, building and troubleshooting electrical circuits that are used to control automated test equipment and/or process controls
Experience integrating controls with AC and DC motor drives
Working knowledge of the electrical codes governing the proper design and installation of electrical circuit
Experience collaborating with vendors to complete complex installations such as AC motor drives, switch gear, etc
3+ years’ experience in designing, building and troubleshooting electrical circuits
The ability to strain gage components
2 year technical degree in the electrical field, or equivalent experience
4 year degree in the electrical or electrical engineering field
*This position is located in Coffeyville, KS. Candidates must be able to relocate to this location at their own expense.***

101

Instrumentation Technician Resume Examples & Samples

Develops Thermal data acquisition systems to satisfy requirements
Stays abreast of new technology and competitive products in the area of Thermal data acquisition
Familiar with Thermal development and calibration processes
The successful candidate will normally have 5+ years of experience
This successful candidate should have technical training beyond the high school level. Learning and technical growth beyond high school should be demonstrated through an associate or bachelor’s degree, technical course work, professional certifications, military training, Journeyman status, or specific corporate training acquired on the job. For the technician without a degree beyond the high school level, the nature of education or training should be very specifically defined
Understanding of engineering theory and principles of operation of mechanical/electrical mechanisms
Specific knowledge of Thermal systems, their integration and control (electronics, software, control systems)
High level analytical ability where problems are unusual and complex
The candidate should possess skills in several of the following functions

102

Laboratory Instrumentation Technician Resume Examples & Samples

Three years of experience performing instrumentation calibration and / or maintenance in a pharmaceutical, chemical, industrial, or related laboratory environment, or demonstrated equivalent combination of education and experience./n/n - Qualified applicants offered a position must be able to obtain site specific security access including all applicable background checks
Associates Degree or Technical School Certificate for Instrumentation / Electronics./n - ISA level 1 Certification/n - Experience with digital controls systems, PLCs, etc
Hands-on experience with the operation, repair and maintenance of Honeywell and Siemens control equipment devices./n - Experience in calibration, troubleshooting and repair of Process Instrumentation on equipment such as Autoclaves and Glassware Washers
6 Month Contract

103

Instrumentation Technician Resume Examples & Samples

Analysing and investigating on re-current instrument faults
PLC panel wiring and fault-finding
Fault find using PLC software

104

Instrumentation Technician Resume Examples & Samples

Able to actively participate in environmental, health and safety work processes such as behavior based safety programs, pre-job work planning, energy control, hot work permits, industry health hazard training
Able to apply Electrical codes, Standards, and Practices such as NEC, ISA, IEEE, NETA, and other NRTL''s
Able to use precision and diagnostic instruments, including laptops and other computer equipment, to test, calibrate, configure and repair complex electrical and electronic devices, equipment and wiring
Able to effectively and efficiently complete assigned work
Able to read and interpret plans, specifications, manuals, circuitry/wiring and ladder logic diagrams; exercise independent judgment and initiative within established guidelines
Able to coordinates work assignments with other sections, divisions or departments
Able to operate and maintain well and other facilities electrical and electronic equipment
Able to test and repairelectrical equipment
Able to calibrate equipment and Instruments
Able to work with computer and communication networks, including spread spectrum and microwave radio and antenna transmission systems; T-1 multiplexers, demultiplexers, copper telephony, etc
Able to Install, interconnects, calibrates and adjusts radio and antenna transmission systems, including radio polling remote and repeater systems, and orients antennas toward repeater locations
Able to diagnose and repair telephone systems and related equipment to ensure operations within specified parameters
Able to trouble shoots control systems ( Relays and PLC''s)
Able to trouble shoot SCADA, HMI and RTU''s
Able to troubleshoot, maintain & install instrumentation end devices associated with Oil and Gas operations and practices
Able to work with teams/others to solve problems and improve process
Able to apply voltage ratings to cable systems including installation of coaxial and fiber optic cable systems
Able to read electrical and control systems drawings and specifications
Able to Install, interconnects, calibrate and adjust radio and antenna transmission systems, including radio polling remote and repeater systems, and orients antennas toward repeater locations
Able to maintains system standards and documentation including Standard Operating Procedures
Experience participatin in environmental, health and safety work processes such as behavior based safety programs, pre-job work planning, energy control, hot work permits, industry health hazard training
Experience applying Electrical codes, Standards, and Practices such as NEC, ISA, IEEE, NETA, and other NRTL''s
Experience using precision and diagnostic instruments, including laptops and other computer equipment, to test, calibrate, configure and repair complex electrical and electronic devices, equipment and wiring
Experience effectively and efficiently completing assigned work
Experience reading and interpreting plans, specifications, manuals, circuitry/wiring and ladder logic diagrams; exercise independent judgment and initiative within established guidelines
Experience coordinating work assignments with other sections, divisions or departments
Experience operating and maintaining well and other facilities electrical and electronic equipment
Experience testing and repairing electrical equipment
Experience calibrating equipment and Instruments
Experience with computer and communication networks, including spread spectrum and microwave radio and antenna transmission systems; T-1 multiplexers, demultiplexers, copper telephony, etc
Experience Installing, calibrating and adjusting radio and antenna transmission systems, including radio polling remote and repeater systems, and orients antennas toward repeater locations
Experience diagnosing and repairing telephone systems and related equipment to ensure operations within specified parameters
Experience troubleshooting control systems ( Relays and PLC''s)
Experience troubleshooting SCADA, HMI and RTU''s
Experience troubleshooting, maintaining & installing instrumentation end devices associated with Oil and Gas operations and practices

105

Instrumentation Technician Resume Examples & Samples

Under supervision, evaluate and implement setup and preparation of medical equipment
Effectively communicate and partner with teammates and colleagues
Follow appropriate policies, procedures, hospital protocol, and completes necessary
Document all equipment setup actions and submit reports/summaries according to
Associate’s or Bachelor’s degree in Electrical Engineering, Biomedical Engineering,

106

Instrumentation Technician Journeyman Resume Examples & Samples

Minimum of 2 years’ experience in an Industrial Maintenance role
Excellent Verbal and Written communication skills
Read diagrams, schematic drawings and service manuals to determine work procedures

107

Instrumentation Technician Resume Examples & Samples

Background in Instrumentation and/or Electronics Engineering with knowledge of computer systems is required
Knowledge or experience with installing and replacing strain gauges, accelerometers, and thermocouples is highly desired
AutoCad software experience is desired
Be familiar with Electrostatic Discharge safety methods and protocols
Solder/de-solder experience is highly desired. Solder certification to IPC-J-STD-001 is a plus

108

Electronics Instrumentation Technician Resume Examples & Samples

Associate degree in electronics or a related field or at least 2 years of repair and/or troubleshooting of electronic and/or electrical components and/or systems
Good communication skills and the ability to interact regularly with the engineering support staff and management
Experience in troubleshooting instrumentation and test equipment
Significant experience using electronic diagnostic tools
Ability to program PLCs and troubleshoot PC issues

109

Instrumentation Technician Resume Examples & Samples

Troubleshooting, repair and calibration of pneumatic and electronic instruments
Preventative maintenance and programming of control systems
Maintenance and repair of process analyzers construction
Checkout and commissioning of new installations

110

Instrumentation Technician Resume Examples & Samples

Familiar with Industrial Safety protocol
Experience required reading 4-20 milliamp signals
Strong instrumentation troubleshooting/problem solving skills
Strong understanding of instrumentation/system start up requirements
Must be proficient in the use of multi-meters, programmers, calibrators, hand tools and equipment of the trade
Proficient with VOM use of current, voltage and resistance
HVAC system instrumentation (A plus)
Interpret project plans: Architectural, Mechanical, Electrical, Instrumentation & Controls P&ID
Good computer skills: Excel, Word, Power Point, CMMS (Bigfoot a plus)
Familiar with Honeywell Uniformance (A plus)
Calibration Management Software (ProCal a plus)
Experience with 24 volt DC systems
Perform tasks requiring Fall Protection & Confined Space
Strong professional behaviors; able to work with engineering and operations personnel
Good communication skills to all levels; email, reporting and presentations
5 yr. apprenticeship program or similar years work experience
Instrumentation Technician (Preferred) 3-5 years experience
3 yr. experience working in a manufacturing/industrial environment a plus
UPW Knowledge (Considered)
Industrial Waste Knowledge (Considered)
HVAC instrumentation experience (preferred)

111

Instrumentation Technician UG Resume Examples & Samples

The Instrumentation Technician is responsible for providing dedicated technical and operational systems support to the process division. The role requires a high degree of competence in instrumentation used in highly automated plants. The role is further responsible to ensure that all systems are maintained and optimised to ensure that the capacity to the production process is maximised
National N6 Diploma + Trade Test OR National Diploma in Electrical Engineering (Process Instrumentation) (T3/S4)
Registered as a Professional Engineering Technician with ECSA
3 years relevant work experience (external applicants only)
Advanced computer literacy
English literate
Good decision making skills
Valid driving licence code 08

112

Laboratory Instrumentation Technician Resume Examples & Samples

Responsible for daily instrumentation audits, calibration, preventative/predictive maintenance and troubleshooting of all laboratory instruments
Develop and maintain individual instrument calibration logs, maintenance logs and analytical method performance metrics (SPC)
Provide expert training for laboratory shift technicians and conduct proficiency testing on analytical methods and sample analysis
Provide flexibility in laboratory operations by
Provides coverage for heavier sample load on days during start-up
Provides swing coverage in the event a shift technician is out sick or on vacation for an extended period
Provides coverage (over the phone or in person) in the event a critical piece of instrumentation becomes inoperable
Provides backup for small seed generation in the event Microbiologist is unavailable
Successful candidate must meet Quality Based Selection (QBS) criteria
B.S./A.S. in Microbiology, Biochemistry, Chemistry or a related field highly preferred
Minimum of 1-3 years experience in an industrial lab environment
Good record-keeping skills and exceptional attention to detail
Self-starter with systematic decision making, problem solving and troubleshooting skills
Strong team player with an ability to work closely with all functional teams within the plant
Superior problem solving and instrument / sample troubleshooting skills
Advanced knowledge of multiple analytical techniques including, but not limited to: gas chromatography, ion chromatography, HPLC, FT-NIR, bomb calorimetry, TOC, TSS, automated titration, moisture balance and densitometry
Experienced in aseptic and microbiologic techniques as they apply to enzyme based laboratory and manufacturing processes
Keen focus on laboratory safety

113

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician are responsible for troubleshooting, maintaining, testing, calibration, creating documentation for all equipment in the glass making plant
The instrumentation technician will perform calibrations; build/design controls, and develop operating parameters and specifications as needed throughout the plan
Makes recommendations and determines quantities and potential work time for proposed upgrades, installations, repairs and projects
Maintains clean and orderly conditions in all working areas
Ensures duties are performed in a fiscally responsible manner while observing all safety practices and regulations
Responsible for reporting cost saving ideas and any safety issues to the supervisor
An associate degree in electronic or related fields for technician level
Experience with programmable logic controllers, variable frequency drives, motion controllers and basic computer skills
Ability to work in a 24/7/365 environment and flexibility to work off-hours to accommodate scheduled changes or plant needs

114

Instrumentation Technician Resume Examples & Samples

Understanding of Traceability, Substitution of Standards, and Test Accuracy and Uncertainty Ratios
Skilled with pneumatic, mechanical, and electrical instrumentation; as well as manual and computer-based process control loops and systems; understands and applies basic concepts of calibration and requirements including accuracy testing
Basic understanding and application of instrument, equipment, and loop calibrations of various parameters in manufacturing, utilities, and laboratory environments
Ability to climb stairs; climb on equipment such as tanks. Moderate to heavy lifting
Understanding and awareness of safety requirements and safe practices. General electrical panel knowledge and electrical safety procedures. Working knowledge of MS Office suite
Must have a valid driver s license and good driving record
Reliable, confident, eager to learn, and enjoy working with people
Able to make independent decisions within defined scope of work, seeks clarification and directions when needed

115

Analytical Instrumentation Technician Resume Examples & Samples

Working directly with clients to troubleshoot, diagnose and complete repair of a wide variety of laboratory analytical equipment
Disassembles, inspects, cleans, repairs, calibrates, tests and performs periodic maintenance of speciality equipment
Operates electronic test equipment using multi-meters and leak testers
Inspects, evaluates and determines necessary modifications, performs complex repairs or removal of instruments or devices that need overhauling during scheduled maintenance
Reinstalls, tests,evaluates,calibrates, and maintains or devices upon completion of repairs
Documents daily maintenance activity, repairs and other work performed
Communicates with customer's staff for calibration, repairs and operations of equipment as necessary

Download Instrumentation Technician Resume Sample as Image file

Related Job Titles

Facility Technician Resume Sample

Repair Technician Resume Sample

Optical Technician Resume Sample

Instrumentation Engineer Resume Sample

Lube Technician Resume Sample

Pump Technician Resume Sample

Instrumentation Resume Sample

Refrigeration Technician Resume Sample

Satellite Technician Resume Sample

Instrumentation Supervisor Resume Sample

Instrumentation & Control Resume Sample

Instrumentation & Controls Resume Sample

Browse More

Instrumentation Technician Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Instrumentation Technician resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Instrumentation Technician Supervisor Resume Examples & Samples

Application Instrumentation Technician Resume Examples & Samples

Dynamometer Lab Instrumentation Technician Resume Examples & Samples

Application Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Application Instrumentation Technician Resume Examples & Samples

Dynamometer Lab Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Lead Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician / Journeyman Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Specialist Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Calibration & Instrumentation Technician Resume Examples & Samples

Avionics & Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Senior Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Calibration / Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Controls & Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Laboratory Instrumentation Technician Resume Examples & Samples

Laboratory Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Test & Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

Instrumentation Technician Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume