Metrology Engineer Job Description

Metrology Engineer Job Description

4.8
178 votes for Metrology Engineer
Metrology engineer provides leadership in the application layer software for motor and SMPS control is also desirable.

Metrology Engineer Duties & Responsibilities

To write an effective metrology engineer job description, begin by listing detailed duties, responsibilities and expectations. We have included metrology engineer job description templates that you can modify and use.

Sample responsibilities for this position include:

Investigate advanced metrology methods, including multi-sensor CMMs, non-contact inspection systems, and advanced sensors and gaging methods
Develop, deploy, and maintain software tools to support airfoil inspection in P&W supply chain
Working closely with overlay equipment vendors on continuous improvement of software/hardware and development of new overlay measurement techniques
Use advanced metrology methods, especially structured light scanning systems, to scan and inspect engine hardware to support engine development programs and field investigation tasks across the globe
This position requires the ability to work with minimal supervision/engineering oversight on a moderate level of engineering support tasks
Responsible for work that may involve longer range and/or complex business objectives in field of expertise
Conducts activities in a safe and healthy manner and work in accordance with established HS&E requirements to ensure the protection of associates, the public, and the environment
Responsible to the Director of Aeronautical Engineering within RSAF Headquarters (HQRSAF) Directorate of Aeronautical Engineering (DoAE) to provide day to day) advice to RSAF Officers on matters pertaining to the RSAF METCAL Programm
Ensure that necessary resources are in place
Advise the RSAF Directorate of Aeronautical Engineering on acquisition logistics and systems engineering matters

Metrology Engineer Qualifications

Qualifications for a job description may include education, certification, and experience.

Licensing or Certifications for Metrology Engineer

List any licenses or certifications required by the position: LEAN, DFSS, DRM, ISO17025, ISO10360, UKAS, ASQ, PMP, CFC, UA

Education for Metrology Engineer

Typically a job would require a certain level of education.

Employers hiring for the metrology engineer job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and Master's Degree in Engineering, Physics, Science, Mechanical Engineering, Technical, Electrical Engineering, Manufacturing, Math, Optics, Education

Skills for Metrology Engineer

Desired skills for metrology engineer include:

Software
Statistical process control
Assemblies
Sensors
Part and assembly modeling using PTC Creo and Windchill PLM
Similar
Actuators
Automation logic
C/C++ desirable
Control algorithms

Desired experience for metrology engineer includes:

Ability to investigate and learn new technologies within metrology
Coordinate, create, and modify inspection routines on CMM for current and new components
Train inspectors on how to run CMM with limited operator interaction
Setup and conduct capability studies to understand long-term feasibility of products
Take ownership as the point of contact including training staff of metrology issues
Responsible for fixtures and new parts

Metrology Engineer Examples

1

Metrology Engineer Job Description

Job Description Example
Our growing company is searching for experienced candidates for the position of metrology engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for metrology engineer
  • Responsible for manufacturing and QC process design, including machinery selection and automation level selection, example Cmm, laser scanning system, vision control system, manuel equipment, Build strong business case along with development or improvement concept
  • Develop in-depth expertise in the area of electrical and pneumatic instrumentation including the applicable control system interfaces
  • Defines, develops and implements Quality Engineering strategies, which contribute to the campus strategic directions
  • Develops and maintains QA plans and timeliness of global new product introductions utilizing Advanced Product Quality Planning and Process Optimization specific to the customer
  • Evaluates and provides input to inspection processes via inspection aids and instruction guidelines
  • Develops appropriate systems for document storage, access and review pertaining to global customer accounts
  • Reviews all supplies, internal, and customer discrepancies, coordinate and track the effectiveness of corrective/proactive action efforts
  • Conducts periodic review and maintenance of all documentation files
  • Reviews all supplier or customer discrepancies
  • Participates in the vendor survey activities as applicable
Qualifications for metrology engineer
  • Proficient in mathematical applications- Algebra, Geometry, & Trigonometry
  • Knowledge of mechanical inspection methods and tools used to determine product acceptance
  • Provide measurement system analysis on parts
  • Support design engineering on new development projects
  • Lead continuous improvement initiatives focused on ensuring processes and techniques are aligned with future business needs
  • Be able to communicate effectively on deviations to specifications
2

Metrology Engineer Job Description

Job Description Example
Our company is hiring for a metrology engineer. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for metrology engineer
  • Interfaces with all departments as applied to the Policies and Procedures
  • Driving the understanding of new overlay metrology technology and measurement techniques to ensure that our measurement capabilities meet the technical device roadmaps
  • Working closely with process development and process integration engineers to optimize overlay measurements for multiple device process flows and stacks
  • Evaluating new overlay metrology tools and technologies to determine the best performance and cost of ownership
  • Optimizing and maintaining the calibration of overlay metrology systems
  • Collaborating with Photo Engineering and the Scribe/Frame Engineering group to help layout metrology mark designs
  • Develop mechanical measurement systems and fixtures for closure systems, ophthalmic medical devices, molds, mold inserts, gages, and plastic and metal parts and components
  • Lead validations, change control and root cause analysis
  • Ability to write analytical reports and provide sound rationale for investigations
  • Perform mechanical testing, analyze data and prepare reports
Qualifications for metrology engineer
  • Proficient in set-up and operation of inspection equipment
  • Proficient in metrology methods/technology
  • Provide support and clarification of specification/print reviews
  • A minimum of a BS in Optics, Physics, Engineering or equivalent technical degree is required
  • A minimum of 6 years of work experience in the industrial, technical or research environments with a Bachelor's degree is required or a minimum of 4 years of work experience in the industrial, technical or research environments with an advanced degree (MS, PhD, ) is required
  • Experience working measurement systems is required
3

Metrology Engineer Job Description

Job Description Example
Our company is hiring for a metrology engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for metrology engineer
  • Program leadership on Smartscope and CMM
  • Test mechanical features using coordinate measuring machines (CMM), video-based inspection and measurement equipment
  • Drive the qualification of new measurement and testing equipment
  • Consult and guide site/supplier end users on training and maintenance of new fixtures and equipment
  • Oversee Calibration Schedule, Uncertainty Budget and Maintenance activities for measurement equipment
  • Static and Dynamic repeatability studies for Measurement Fixtures, Manufacturing Tooling and Inline Measurement Gauges
  • Validate single part, sub-assembly and full assembly measurement plans to ensure data coordination throughout the vehicle build
  • Schedule and provide work requirement for special investigations, defining datum scheme, fixture/part holding, measurement sequence and selection of measurement tool
  • Support Quality, Production and SPC Team with development of quality processes to improve reaction time and visibility of measurement data
  • Coordinate build events with measured parts for using complex gauges, ensuring documentation of parts and oversee measurement activities
Qualifications for metrology engineer
  • Develop method of "gauge" evaluation to consider, calibration frequencies, gauge life, fit for purpose
  • Previous experience in optics is preferred
  • Demonstrated project management experience in the metrology field is strongly preferred
  • Prior experience and training in medical device quality systems
  • Previous experience working in GxP laboratories is preferred
  • Developing knowledge of the basic principles in various engineering disciplines
4

Metrology Engineer Job Description

Job Description Example
Our company is hiring for a metrology engineer. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for metrology engineer
  • Assist Keysight global laboratories with standard compliance
  • Perform technical diagnosis of operational problems and repairs/calibrations on wide range of laboratory equipment to ensure that the equipment is operating to the customer’s complete satisfaction and manufacture specifications
  • Deliver technology and shop solutions for precision manufacturing measurement systems
  • Create standards for gaging equipment, technology, measurement and calibration schema, control plans, feedback loops to machining centers
  • Ability to setup and run all lab measurement equipment
  • Deliver inspection reports per the job request
  • Monitor each systems performance for accuracy/repeatability issues
  • Peer review job results with colleagues
  • Assist Site Manager with quoting as necessary
  • Job requirement review with Site Manager prior to job start
Qualifications for metrology engineer
  • Minimum of 2 years overlay metrology experience in the semiconductor industry
  • The ability to work individually on assigned tasks or as a team
  • Driving the understanding of new metrology technology and measurement techniques to ensure that our measurement capabilities meet the technical device roadmaps
  • Designing and optimizing the layout of metrology targets to maximize measurement quality
  • Complete two or three Metrology related projects and report on results
  • Plan and run experiments in a semiconductor cleanroom using cutting edge technology
5

Metrology Engineer Job Description

Job Description Example
Our growing company is hiring for a metrology engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for metrology engineer
  • Prepare, submit and save a copy of proof of delivery (POD) to network drive
  • Help drive productivity by consistently and effectively utilizing Zeiss productivity tools (e.g., quick change tooling and fixturing, off-line programming, MCC and PiWeb)
  • Define the criteria and Monitor the execution of the metrology knowledge
  • Coordinate the design, development and implementation of complex CMM programs according the procedures established
  • Develop complex measurement programs using the approved languages as DMIS and SILMA XG
  • Lead the efforts to keep calibrated the CMM equipment, articulated measurement arm and laser trackers on IJD
  • Coordinate the process for Metrology equipment acquisition and replacement
  • Develop and keep updated the appropriated Work Instructions for the Metrology Labs and Metrology practices execution according the standards (ASME Y14.5, ISO17025, ISO10360, ANSI/DMIS 105.2-2009, ISO10012, ISO9001 & JDQPS)
  • Support PDP teams on the interpretation of Complex GD&T features to transform on measurement system and process monitoring activities
  • Participate on FGRs on critical PDP programs
Qualifications for metrology engineer
  • Analyze top-down and cross-sectional SEM data using Excel and JMP
  • Work on new metrology technology and measurement techniques to ensure that our measurement capabilities meet the technical device roadmaps
  • Understanding, optimizing and maintaining the calibration of metrology systems
  • Process and equipment related experience or coursework in instrumentation and calibration procedures
  • Good computer skills including MS Office (Excel, PowerPoint, Word) and JMP
  • Experience with image processing, feature detection and analysis methods

Related Job Descriptions

Resume Builder

Create a Resume in Minutes with Professional Resume Templates