Analysis Technician Job Description
Analysis technician
provides testing, Analysis and Repair of Video, Voice and Data Systems (i.e., Electronic Devices such as Gateways, Routers, Hubs, NIC Cards, Telephone Switches, etc.).
Analysis Technician Duties & Responsibilities
To write an effective analysis technician job description, begin by listing detailed duties, responsibilities and expectations. We have included analysis technician job description templates that you can modify and use.
Sample responsibilities for this position include:
Assist and provide supplementary materials preparation and mounting for scanning electron microscopy (SEM)
Assist in materials suitability and failure analysis investigations in an extremely fast-paced, high pressure environment
Onboarding a new application
Assist in developing knowledge base content
Support 24x7 factory systems setup
Uses proprietary software system and emission analyzer equipment to prepare, perform, record, validate, and maintain regulatory required engine/turbine emission testing program
Prepare and maintain detailed emission monitoring reports and other regulatory required data
Conduct quality assurance / quality control to ensure accurate reporting
Read, understand and interpret air quality permit requirements associated with each facility in an assigned area
Maintains a working knowledge of state and federal testing regulatory requirements including, but not limited to, NSPS Subparts IIII, JJJJ, KKKK, NESHAP Subpart ZZZZ, HH, EPA Reference Methods and state air permitting requirements
Analysis Technician Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Analysis Technician
List any licenses or certifications required by the position: CAM, CPI, CPR, III, II
Education for Analysis Technician
Typically a job would require a certain level of education.
Employers hiring for the analysis technician job most commonly would prefer for their future employee to have a relevant degree such as Associate and Bachelor's Degree in Technical, Associates, Education, Engineering, Science, Manufacturing, Military, Electronics, Math, Chemistry
Skills for Analysis Technician
Desired skills for analysis technician include:
Jabil’s software packages
Computer Technology and Data networking
Data networking Routers and/
Electronic components and their application
Firewalls
Reading electronic schematics
Semiconductor TEM/SEM sample preparation techniques to enable measurements to be conducted
Switches and
Use of tools and equipment in troubleshooting electronics
Analysis methodologies used in failure analysis for state-of-the-art semiconductor manufacturing
Desired experience for analysis technician includes:
Physical Capacity Demands – Able to perform shift work on a 12 hours per day shift schedule
3 years of Relevant experience in semiconductors or Lab work or manufacturing or Analysis
Properly operate and maintain portable emission analyzer and other sampling/testing equipment
Coordinate with compression operations personnel for any needed adjustments, repairs, replacement or testing of emission sources or control equipment
Assist, as needed, in troubleshooting and setup of engines/turbines to ensure efficient operation
Utilizes enhanced tracking system to schedule, track and document runtime and required testing frequency for each permit required engine/turbine emissions source within an assigned area on a monthly basis
Analysis Technician Examples
1
Analysis Technician Job Description
Job Description Example
Our growing company is searching for experienced candidates for the position of analysis technician. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for analysis technician
- Assist with air related internal and external inspections
- Coordinate with third party contractors to ensure proper scheduling of EPA Reference Method testing, including obtaining all required operational data, and attends all test events
- Investigate mining improvements by assessing performance data, and benchmarking
- Creating business cases and financial evaluation for projects
- Maintaining data accuracy and developing and executing reports on mining production metrics
- Delivering business reports for the broader BMA management team
- Creating equipment forecast models
- Performs complex tasks and analyses requiring considerable knowledge of scientific and/or laboratory techniques
- Estimates time schedules, manpower and costs and has full responsibility for minor projects, including budgeting
- Performs tasks requiring considerable judgment in determining work methods, interpreting results and writing clear and accurate reports
Qualifications for analysis technician
- Excellent personal computer skills with advanced knowledge of general and/or specialized applications
- Ability to work with minimal supervision and exercise sound, independent judgment
- Ability to develop and effectively deliver presentations and/or testimony related to environmental remediation or litigation
- Technical skills associated with the specific operation and mechanical understanding of compressor engines, other natural gas pipeline and gas processing equipment emission sources and emission analyzing equipment
- Ability to plan and complete assignments in a timely manner and maintain an orderly work environment
- Strong skills in the use of a personal computer with working knowledge of MS Office Suite applications and related applications
2
Analysis Technician Job Description
Job Description Example
Our company is growing rapidly and is hiring for an analysis technician. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for analysis technician
- Conduct standard analysis in alignment with Failure Analysis Engineer (Light Microscopy, X-Ray, SAM, SEM)
- Ensure complete documentation for performed analysis in your area of responsibility, according to defined flows
- Ensure deviations are documented and communicated
- Ensure that Failure Analysis expertise and capabilities are shared with relevant stakeholders (both internal and customers) in terms of advice or recommendation as input for the process and product improvement
- Ensure that Failure Analysis equipment or Failure Analysis Hardware and Software are running smoothly (Tool ownership)
- Ensure correct and on time registration of any Failure Analysis request
- Performs sample preparation on tobacco products using wet chemistry techniques
- Adheres to highest quality standards
- Perform analysis of materials and components utilizing standard chemical/laboratory instrumentation for R&D, Product Development and Manufacturing activities
- Ensure adherence to good laboratory practices when required, in the areas of Laboratory Safety, Instrument Calibration, Instrument maintenance, Instrument troubleshooting and problem solving, Method Development, Laboratory Documentation (SOP), Quality System Support (R&R)
Qualifications for analysis technician
- Ability to communicate effectively in speech and writing with internal and external customers
- Ability to organize and work several tasks at any one time
- Ability to make sound decisions by utilizing job knowledge, work experience and evaluation of risks and consequences
- Must be able to follow safety, environmental and emergency response procedures
- May be required to lift fifty (50) pounds or more
- May be required to work at heights up to and exceeding thirty (30) feet, underground or in confined spaces
3
Analysis Technician Job Description
Job Description Example
Our growing company is hiring for an analysis technician. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for analysis technician
- Provides support for next level Escalation from fellow peers
- Handles unknown and Non Routine Failure Analysis (FA) Issues/Requests from Product lines
- Work with Engineers to conduct and develop new analysis methods
- Ensure adequate training available for support and manage one the job (OJT) schedule
- Overall spares accountability for respective Lab (Wet/Dry)
- Overall equipment uptime accountability
- Conduct standardized physical and chemical tests applicable to a wide range of products
- Provide daily instrument test results and monitor the quality of data by applying instrument data review
- Contribute to the completion of daily sample login responsibilities by receiving, opening, and sorting mail and entering in sample information
- Collect and enter, or send, test results into the Global Used Oil Analysis Laboratory Information Management System (GUOALIMS)
Qualifications for analysis technician
- On a routine basis, must climb ladders, walkways and scaffolds
- Work around and near equipment exuding high noise levels
- Preferably graduate of a technical course
- Willing and able to work with chemicals required for the demounting/decapsulation processes
- Meticulous with steady hands for reworking customer returned parts
- Basic knowledge in FA related procedures such as curve tracing, package level analysis, FA tools also an advantage
4
Analysis Technician Job Description
Job Description Example
Our innovative and growing company is looking to fill the role of analysis technician. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for analysis technician
- Maintain integrity of recorded laboratory results
- Maintain work area to facility housekeeping standards
- Conduct preventative maintenance for lab equipment and assist with non-routine instrument repair
- Work together with other team members to provide regular safety and housekeeping inspections
- Secure instrument certifications via the Collective Experience Matrix (CEM)
- Function as a member of corporate management systems
- Accept quality project assignments and reports findings to the quality committee
- Participate in Loss Prevention Systems Tools activities
- Attend and participate in monthly Operations Integrity Management Systems meetings addressing facility Safety, Security, Health and Environment requirements
- Participates in shift changeover or information transfer via logbook
Qualifications for analysis technician
- Minimum 1 – 2 year(s) working experience in Failure Analysis environment will be an added advantage
- Have good eye sight and able to use high power microscope, up to magnification 1000x
- Education - 2 Year Technical/Associates Degree in a Science, Math, Engineering, electrical engineering, Semiconductor Manufacturing or a related discipline or equivalent military training / experience or a related discipline or 2 additional years of relevant experience
- Technical Associate Degree or equivalent experience in applicable discipline
- 8 years applicable technical experience
- Advanced computer skills with office software applications
5
Analysis Technician Job Description
Job Description Example
Our company is searching for experienced candidates for the position of analysis technician. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for analysis technician
- Failure analysis which includes operating state-of-the-art analytical failure analysis tools such as Optical Microscope, Scanning Electron Microscopes (SEM), Focus Ion Beams (FIB), Transmission Electron Microscope (TEM), wet and dry etching and de-layering to identify yield-limiting issues such as processing defects and electrical margin failures
- Support routine inline process targeting jobs such as tool expanding, bevel control using CA (Construction Analysis)
- Target a 24-hour turn around for all non-conforming material entering the area for analysis
- Provide USSOCOM Identity Management Program with support for determining evolving trends, establishing best practices, and TTPs, and sharing information related to IdM
- Travel to CONUS locations minimum 2 times a year
- Perform PM routines on non-vendor supported equipment to meet the laboratories tool performance objectives
- Create and maintain maintenance procedures and specifications for specific toolsets using JBI methodology
- Interact daily with all groups regarding tool issues through pass-downs, direct communication and reporting in a professional and supportive manner
- Act as project manager when assigned to drive specific focused tool projects
- Provide general support to all lab teams such as parts orders, building services, and facility work requests
Qualifications for analysis technician
- Advanced use of applicable equipment
- Diploma in Electronic/Mechanical Engineering/Physics/Chemistry
- Able to interpretation EDX data
- Able to acquire high resolution SEM imaging able to provide analysis summary to requestor
- Have some knowledge and understanding on media and operation process flow
- Minimum 4 years Well Analysis experience